check AUDI A6 2006 C6 / 3.G RNS_E Navigation System Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2006, Model line: A6, Model: AUDI A6 2006 C6 / 3.GPages: 194, PDF Size: 13.73 MB
Page 15 of 194
Overview13
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Tips
You can find information about the different drives starting on page 34.Anti-theft codingGeneral
Effective safety measures in conjunction with the PIN
prevent misuse of the equipment by unauthorized
parties.The electronic lock-up is operational, if:
the Navigation System is removed from the vehicle,
the Navigation System is disconnected from the vehicle current
supply,
the battery is disconnected or
the electric fuse for the Navigation System is blown.
I f t h e a n t i - t h e ft c o d i n g h as l o cke d up t h e N a v i g a t i o n S ys t e m fo r o n e
of the reasons given, the speller display for entering the PIN
page 14, fig.6 appears after the Navigation System is switched
on.
After that, the Navigation System can only be operated again only
by entering the correct PIN.
This PIN is attached to the equipment card along with the equip-
ment number.
The PIN can be used for your equipment alone and cannot be
changed.
Note
The “equipment card” should be removed and kept in a safe place -
under no circumstances should it be kept in the vehicle. This makes
the Audi Navigation System unusable by thieves.Applies to vehicles: with convenience codingUser-friendly radio codingAft e r t he P I N i s e n t e re d t h e fir s t t im e , t h e N a v i g a t i o n S ys t e m g e t s to
know its vehicle.
If the power supply was interrupted, the Navigation System checks
to see whether it is still its vehicle. If it is, the Navigation System is
ready for use again after a few seconds.
It is no longer necessary to manually disable the electronic lock!
However, if the Navigation System is installed in another vehicle,
the electronic lock must be cancelled by entering the PIN page 14.
Page 38 of 194
Drives 36Loading navigation DVD– Press the button to open the display.
– Hold the navigation DVD by the hole in the center and the
outer edge page 51, fig.52.– G ui de t h e n a vi g a t i o n DV D s t ra i g h t ( l a be l s i de u p) i n to t h e
drive . The navigation DVD is pulled in automatically.
Before in ser ting the n avigation DVD, check to make sure the re is n o
DVD/CD already in the drive. If there is a DVD/CD in the drive, push
the Eject button and remove the DVD/CD
page 37.
The navigation DVD should never be forced into the drive. The navi-
gation DVD is pulled in automatically.
If you are shown the message Please check navigation DVD in the
display, you cannot use the Navigation function. Possible reasons
are described starting on
page 51.
If you are shown the message Navigation is being initialized in the
display, navigation is in the start phase. As soon as this message
disappears and a navigation menu is displayed, you can use the
navigation feature.
Tips
To ensure problem-free operation, you should use only a clean,
unscratched and undamaged navigation DVD. You can find addi-
tional hints starting on
page 48.
Fig. 33 Display open:
DVD navigation driveFig. 34 Display open:
Inserting navigation
DVD into the drive
A2
A1
Page 42 of 194
Drives39
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
– Press the button to open the display page 38,
fig.36.
– Hold the MP3 CD or audio CD by the hole in the center
and the outer edge page 38, fig.37.
– Guide the MP3 CD or audio CD straight (label side up)
into the drive . The CD is pulled in automatically.Before inserting the CD, check to make sure there is no CD already
in the drive. If there is a CD in the drive, push the Eject button and
remove the CD
page 37.
A CD s ho uld never be forced in to the drive. The CD is pulled in auto-
matically. If the CD is inserted wrong side up, you will be alerted by
a message in the open display.
If an MP3 CD has been inserted and not played, the data from the
ID3 tag are read in in the background. If you start playback of an
MP3 CD immediately, the ID3 tag data are displayed for the track
being played.
An audio CD (CD-A) inserted in the DVD navigation drive is played
using the CD function
page 78. An MP3 CD inserted in the DVD
navigation drive is played using the MP3 function
page 83.
Note
Always keep the navigation DVD that you removed in a suitable
j e w e l c as e (e .g . C D c as e ) to p ro t e c t t he DV D f ro m d i r t , d us t p a r t i c le s ,
scratches and other damage
page 48.
Do not attach labels to the CDs. Heat can cause the label to
b e c o m e d e t a ch e d i n t h e d ri v e , j a m t h e CD a n d c a us e a m a lf un c t io n .
Use a permanent marker to label CDs you have burned yourself.
Never expose the navigation DVD to direct sunlight.
Tips
Standard 12-cm diameter CDs can be used. Mini CDs with a
diameter of 8 cm (3 inches) or non-circular CDs, known as shape
CDs, must not be used.
The use of cleaning CDs can lead to mechanical damage to the
drive.
Because of the diversity of CD-R/CD-RW blanks and their
different storage capacities, function may be limited with individual
storage media.
If you have not inserted a navigation DVD into the drive, you
cannot use the Navigation and Directory functions.
Ejecting a CD– Press the button to open the display.
A2
A1
Fig. 38 Display open:
Ejecting a CD
A2
Page 54 of 194
Drives51
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Tips
If outside temperatures are unusually high or low, the navigation
DVD function may be temporarily unavailable. A thermal switch has
been installed to protect the navigation DVD and the laser
scanner.Handling the navigation DVD or CD
Correct handling of the data carrier being used helps
to extend its life.Alwa ys hold a N avigatio n DVD o r CD either b y the hole in the center
or by the outer edge
fig.52.
The CDs should never be forced into the slot. The CD will be pulled
into the CD changer automatically.
When inserting a CD into the drive, insert it with the printed side
facing up and straight.
Error messagesThe following may be the reason for a read error in the display:
The navigation DVD, audio CD or MP3 CD is contaminated.
The navigation DVD, audio CD or MP3 CD was inserted upside
down (with the printed side down).
The navigation DVD, audio CD or MP3 CD is scratched.
There is condensation on the navigation DVD, audio CD or MP3
CD.
The mechanism for the CD changer, the navigation DVD drive or
the MP3 card reader is malfunctioning.
Check the navigation DVD, audio CD, MP3 CD or SD/MMC memory
card for damage.
Cl e a n th e n a v i g a t io n DV D, a ud i o C D o r M P 3 C D b y w i p i n g it f ro m t he
center toward the outside with a soft, lint-free cloth.
In cold weather and in rain showers, moisture (condensation) can
collect in the housing or on the data carriers. This can cause skips
or make playback impossible. When moisture is no longer present,
it should be possible to play them.
If the mechanism for the CD changer with magazine malfunctions,
remove the magazine from the changer
page 46 and inspect the
CDs for damage and for correct positioning in the magazine
page 48.
I f t h e m e c h a n i s m f o r t h e A u d i c d c h a n g e r m a l f u n c t i o n s , p u s h t h e C D
Eject button and the corresponding illuminated button to eject the
CD page 44. Inspect the CD for damage.
Try to resume DVD/CD operation. If the malfunction persists, please
consult a qualified dealership.
Fig. 52 Holding your
Navigation DVD or CD
Page 76 of 194
RADIO 72Applies to vehicles: with Satellite Digital Audio Radio ServiceCategory filter
You can make a preselection in the program catego-
ries.Fig. 73 Setup Radio: Category filterTurning on filter option
– Press the function button in the satellite radio
menu.
– Select Category filter.
–Under Category filter select the desired filter option and
press the control knob. A check
will appear after the
filter option, or– Select the filter option All categories and press the
control knob so that a check
appears after All
categories.
Turning off individual filter options
– Press the function button in the satellite radio
menu.
– Select Category filter.
–Under Category filter select individual filter options that
are not to be active any longer and press the control
knob. The check
after the filter option disappears.
Turning off all filters
– Press the function button in the satellite radio
menu.
–First select the filter option All categories and press the
control knob so that a check
appears after All
categories. A t the sam e tim e, a check
will appear after
each filter option.
– If you press the control knob again afterwards, the
checks
after all of the filter options disappear.
The stations that are displayed in the station list can be filtered
according to your personal des ire s as to type of program. The selec-
tion of program categories depends on what your provider offers.
SETUP
SETUPSETUP
Page 94 of 194
CD/SD89
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
–Select Repeat.
–Select Off, Playlist/Dir., All playlists or Tr a c k page 88,
fig.92.The tracks from an available MP3 data carrier can be repeated.
Function Off: The Repeat function is switched off.
Function Playlist/Dir.: The MP3 tracks from the current Playliste
or of the current Directory are repeated.
Function All playlists: The MP3 tracks from all available Playlists
or of all Directories are repeated.
Function Tra c k: The MP3 track currently selected is repeated.Tips
The Repeat options can be combined with the Repeat and Random
functions. You can find more information in the description of the
Random function
page 86.
SubdirectoriesFig. 93 Setup MP3: Subdirectories activated– Press the fun ction button page 16 in the MP3
menu.
– Select Repeat page 88, fig.92.
– Select Playlist/Dir.
– Select With subdirectories an d p re s s t h e co n t ro l k n o b s o
that a check mark
is displayed behind this function
fig.93.
Th e fu nc t i o n With subdirectories is available for the Repeat
Playlist/Dir. function. In this way, all subdirectories in a directory are
played as well.
SETUP
Page 109 of 194
NAME (directory) 104
– Press the function button page 16.
– Select an existing entry page 101 o r c r e a t e a n e w e n t r y
page 100.
– Select as required Category private or business
page 103, fig.109.
– Select Navigation destination page 103, fig.110.
– Enter the data for the navigation destination, or
– Select Copy from current position or Get from previous
dest. to import the destination data from one of the
previous navigation destinations.
– Select as required Display as top destination to display
the navigation destination in a destination entry menu
page 133.You can store two navigation destinations for one directory entry,
one destination for the business category and one destination for
the personal category.
If the Display as top destination function shows a check mark
after it, this function is active. These navigation destinations are
shown in the main navigation menu
page 133 under the menu
item Start route guidance.
When you have entered the navigation destination and you press
t h e b u t t o n , y o u a r e r e t u r n e d t o t h e d i r e c t o r y c a r d a n d c a n
enter additional data if you wish.
Through the directory (Name), you can call up all entries, without
and with stored navigation destination. You can open the directory
entries with navigation destination in the navigation menu via the control button with the Memory function and by selecting the Load
from directory
page 136 function.
Tips
If you have not inserted a navigation DVD into the Navigation DVD
drive
page 35, you cannot use the Navigation and Directory
functions.
NAME
RETURN
Page 113 of 194
Navigation (NAV) 108Navigation (NAV)General safety precautionsThe driver is completely responsible for traffic safety
even when driving with the Navigation System active.Fig. 111 Display: WarningWhen you set your vehicle in motion and you press the
button, a warning message is shown in the display.
Lesen Sie die Warnmeldung aufmerksam und beachten Sie
die wichtigen Hinweise.
– Select Accept by pressing the control knob when you
have finished reading the warning message.
Be sure that you always have complete control of your vehicle in all
traffic situations when using navigation.
WARNING
Always obey traffic laws, signs and signals, they take prece-
dence over navigation system recommendations.
Always concentrate on driving and pay attention to the road,
listen to the voice prompts and never let yourself be distracted by
the map display on the screen
page 9.
Always remember that data on the Navigation DVD can differ
from the actual situation because of insufficient data or because
the road or traffic routing has changed since the area was
mapped. Do a “reality check” and ignore the navigation system
recommendation if necessary.
Always remember that even if one-way streets, pedestrian
zones, etc. are stored on the Navigation DVD, traffic routing is
subject to constant change. Traffic signals, turning lanes or prohi-
bitions, stop and yield signs, no parking and similar zones as well
as narrow lanes are not covered by the navigation system.
Always adjust your speed to road, traffic and weather condi-
tions and visibility. Never let information about the road ahead
cause you to drive too fast for conditions, for example in fog.
The volume setting should be selected to ensure that outside
signals, such as police and fire truck sirens, are always audible -
danger of accident!
NAV
Page 138 of 194
Navigation (NAV)133
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP terminate this route guidance, select Cancel route guidance
page 132Tips
Calculated destinations can also be changed in the map display by
moving the crosshairs
page 149.
To p d e s t i n a t i o nFig. 138 Navigation: Set entry as top destinationFig. 139 Navigation: Map display of a top destination (push pin)
– In a destination input menu page 117, fig.121, select
the top destination desired from the list below the menu
item “Start route guidance”.
– Select Start route guidance.If you have activated the Display as top destination
fig.138 func-
tion when making entries in the directory (
page 135 or
page 103), they are listed
page 136 in a destination input menu
page 117, fig.121 under the menu item “Start route guidance” .
If you have activated the top destinations
page 155in the “Map
content” menu with a checkmark
, the top destinations you set are
indicated by a “push pin” on the map
fig.139.
Page 141 of 194
Navigation (NAV) 136
– I f y o u w a n t t h e a d d r e s s t o a p p e a r i n t h e To p D e s t i n a t i o n s
list page 133 in einem Zieleingabemenü, select
Display as top destination page 133, fig.138 and press
the control knob. A check
appears after the option.
– Select Save entry.
Using Store in directory you can assign an entry in your directory to
a destination
page 119.
A Name must first be entered in the directory data fields. After the
name has been entered, the remaining data fields can be selected.
I f yo u wa n t t o as s i g n a d e s t i n a t i o n to a n e n t r y a l re a d y s to re d in y o ur
directory, you must first enter the destination. Then select the entry
to be assigned using Store in directory and save it. The destination
entered is assigned to this entry. If you already have a destination
assigned to an directory entry, the new destination will overwrite
the old destination.
Addresses saved as top destinations are displayed in the destina-
tion input menu and can be selected there
page 133.
Tips
R o u t e p l a n s (ro u t e w it h s t o p o v e r s ) c a n b e s t o re d u s i n g t h e Store
route function
page 137.
Administration of the directory data is handled through the
button
page 98.
Load from directoryFig. 143 Navigation: Load from directory–Press the Memory control button in the navigation menu.
– Select Load from directory page 134, fig.140.
– Select your desired destination from the list, or
– Select Find entry fig.143.
– Enter the name you are looking for using the speller or
select one from the list.
– Select Start route guidance.You can also edit an existing address. The current address will then
be replaced.
NAME