instrument cluster AUDI A6 2007 C6 / 3.G RNS_E Navigation System Manual

RADIO 58
function button
– Press the function button in the radio menu.
Each time the button is pressed, the frequency
band changes.The following frequency bands are available:Main radio menuGeneral
The radio station list for the selected frequency band is
displayed in the main radio menu.The station lists for the FM and AM range differ in their behavior.
The FM station list
fig.55 is adapted automatically (dynamically)
and the AM station list page 59, fig.56 has to be updated manu-
ally (statically).
The station list in the XM Satellite Radio*
page 60, f i g .5 7 o r S i r i u s
Satellite Radio* main menu is updated dynamically.
The title line of the Display shows you whether the radio station is
operating in FM, AM, XM* or Sirius*. The frequency band can be
selected with Band control button
page 57.
Tips
The radio station currently set and the frequency band is shown in
the instrument cluster display.Radio station list on the FM band
The FM station list is dynamic and adapts automati-
cally to the current reception status.Fig. 55 Radio: Station list in main FM menu– Press the function button if another menu is
currently being displayed.
– Select the desired radio station in the main FM radio
menu with the control knob.
Frequency band
Abbreviation
Frequency modulation
FM
Amplitude modulation
AM
Satellite Radio
XM* Radio or
Sirius*
FM
AM
FM
AM
FM
AM
FM
AM

RADIO 58
function button
– Press the function button in the radio menu.
Each time the button is pressed, the frequency
band changes.The following frequency bands are available:Main radio menuGeneral
The radio station list for the selected frequency band is
displayed in the main radio menu.The station lists for the FM and AM range differ in their behavior.
The FM station list
fig.55 is adapted automatically (dynamically)
and the AM station list page 59, fig.56 has to be updated manu-
ally (statically).
The station list in the XM Satellite Radio*
page 60, f i g .5 7 o r S i r i u s
Satellite Radio* main menu is updated dynamically.
The title line of the Display shows you whether the radio station is
operating in FM, AM, XM* or Sirius*. The frequency band can be
selected with Band control button
page 57.
Tips
The radio station currently set and the frequency band is shown in
the instrument cluster display.Radio station list on the FM band
The FM station list is dynamic and adapts automati-
cally to the current reception status.Fig. 55 Radio: Station list in main FM menu– Press the function button if another menu is
currently being displayed.
– Select the desired radio station in the main FM radio
menu with the control knob.
Frequency band
Abbreviation
Frequency modulation
FM
Amplitude modulation
AM
Satellite Radio
XM* Radio or
Sirius*
FM
AM
FM
AM
FM
AM
FM
AM

Navigation (NAV)109
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Tips


The Navigation System is designed to provide you with
suggested routes in locating addresses, destinations and other
points of interest.


Changes in street names, construction zones, traffic flow, points
of interest or other road system changes are beyond the control of
Audi of America, Inc.


Complete, detailed mapping of lanes, roads, streets, toll roads,
highways, etc., is not possible, therefore you may encounter
discrepancies between the mapping and your actual location.
IntroductionGeneralFig. 112 Display: Example of navigation mapThe Audi Navigation System can help you to reach your destination
without spending a lot of time studying maps.
During the trip you will receive information on vehicle location,
in structions for turning (directio n and dis tance to turn-off), p resen t
distance to destination and estimated time of arrival at destination
in the Navigation System display
fig.112 and in the instrument
cluster display
page 111, fig.114. In addition you will receive
navigation prompts in the form of a spoken announcement
page 112.
There are two possibilities for guide destination:

Route without stopover (Single destination mode)

Navigation (NAV)111
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP


Your map data DVD includes the continental United States
(excluding Alaska), Hawaii and parts of Canada on a single media
allowing for seamless routing across coverage areas.


Street and city names can be changed. For this reason, there may
be exceptions where the names stored on the DVD do not match the
names that have been changed.


Navigation DVDs can be purchased from an Audi dealer. The
dealer can also provide you with information about navigation DVD
updates.


GPS positioning works in only one direction, i.e. the navigation
system receives data to determine vehicle location, but does not
broadcast data.
Navigation route guidanceFig. 113 Navigation: Example of screen in the Navigation System display
Guidance for your route navigation is provided both visually and
acoustically:

with voice messages
page 112


through a screen in the Navigation System display
fig.113
(
page 112)


through a display in the instrument cluster
fig.114
(
page 113)Tips


If the recommended route is not followed, the system will calcu-
late a new route from the current location.


It is also possible to start the navigation in demo mode
page 161 for simulation purposes.
Fig. 114 Navigation:
Example of display in
the instrument cluster

Navigation (NAV) 112Navigation voice guidanceRoute calculation is announced with the voice message “The route
is being calculated”. During this time, “The route is being calcu-
lated” is shown in the Navigation System display and “CALC” is
shown in the instrument cluster display.
When route calculation is complete, guidance is given by spoken
driving instructions and symbols. Driving recommendations are
a l w a y s m a d e w i t h e n o u g h t i m e t o m a k e a t u r n . A n a n n o u n c e m e n t i s
made in different stages in preparation for a change of direction.
Yo u c a n u s e t h e f o l l o w i n g o p t i o n s t o r e p e a t t h e l a s t n a v i g a t i o n v o i c e
message:

Press the Nav-Info control button in the navigation menu
page 150, if you are not in the Nav-Info submenu.

Press the right thumbwheel on the “multi-function steering
wheel with audio operation - version B*”
page 23.
You can choose which language you want for the voice messages
page 170.
WARNING
If driving instructions run contrary to traffic laws, the traffic laws
always take precedence.
Tips


During the announcement of a navigation prompt, you can
adjust the volume of the navigation prompt using the on/off knob
page 19 on the Navigation System or the volume buttons or the
right thumb wheel on the multi-function steering wheel*
page 21
.


If the v ehicle is in a loca tion which c annot be read b y the Naviga-
tion System (parking lot, garage, parking structure), a voice
message will inform you.
Presentation of maps in the Navigation System display
A comprehensive route will be shown graphically on a
map in the display.Fig. 115 Navigation: Example of a map in the Navigation System displayPress the SETUP function button
page 16 in the naviga-
tion menu. The route is visible on a map
fig.115.In addition to route guidance, you can display detailed information
a b o u t y o u r r o u t e o n t h e m a p . S e t t i n g s c a n b e e n t e r e d d i r e c t l y o n t h e

Navigation (NAV)113
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP map
page 143 and in Setup Navigation
page 151 to d i s p l a y th e
map.
If you are navigating without stopovers, you have the option of
selecting from up to three routes, in addition to detailed route infor-
mation
page 130.
If you are n avigatin g with stopovers, you are shown the entire route
with all stopovers and detailed information in an overview
page 132.
You can also use the map as presented in the Navigation System
display to enter a destination
page 128.
Applies to vehicles: with display of the instrument clusterVisual presentation in the instrument cluster display
A s s o o n a s y o u h a v e e n t e r e d a r o u t e i n t o t h e N a v i g a t i o n S y s t e m a n d
begun navigating, guidance to your destination will also be
displayed in the instrument cluster display.
Fig. 116 Instrument
cluster display:
Example of route guid-
ance presentation
Display
Shor t descriptionEstimated time of arrival at destination or current
stopoverDistance remaining to next turn pointDirectional arrowLocation-dependent display of freeway, highway
and street names
An arrow before the display identifies the name of
the street onto which you should turn.Total kilometers to destination or current stopover
Fig. 117 Instrument
cluster display:
Example of route guid-
ance presentation
(turn off)
A1A2A3A4A5

Navigation (NAV) 114When the turn-off is immediately ahead, the arrow points in the
direction in which you should turn. In addition, the name of the
street is shown under the arrow. A bar graph
page 113, f i g .1 1 7 o n
the right in the display takes you precisely to the turn-off point.
If it is necessary to make a lane change before the turn off, you are
warned in plenty of time about this lane change before the turn-off
arrow by a second arrow
page 111, fig.114.
Tips
With active guidance, you can switch to the trip computer display*
by pressing the trip computer reset button*. Pushing the trip
c o mp ut e r re s e t b ut to n * a g a in r e t ur n s y o u to g u i d a n c e . Yo u c a n fin d
detailed information about the trip computer* in the Owner's
Manual.
Applies to vehicles: with color instrument cluster display:Visual presentation in the instrument cluster display
Change of direction arrowBar graph (countdown): bars decreasing in size indi-
cate how the distance to the immediate turn-off
point is decreasing; the bar graph is not shown until
a change of direction arrow is displayed.If there is another side street before the turn-off
point which is n ot pa r t of current guidan ce , this side
street is represented by a side-street symbol in the
instrument cluster display.
Display
Short description
A6A7A8
Fig. 118 Instrument
cluster display:
Example of route guid-
ance presentationFig. 119 Instrument
cluster display:
Example of route guid-
ance presentation
(turn off)

Navigation (NAV)115
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP A s s o o n as y o u h a v e e n t e r e d a r o u t e i n t o t h e N a v i g a t i o n S y s t e m a n d
begun navigating, guidance to your destination will also be
displayed in the instrument cluster display.
When the turn-off is immediately ahead, the arrow points in the
direction in which you should turn. In addition, the name of the
s t r e e t i s s h o w n u n d e r t h e a r r o w. A b a r g r a p h
page 114, fig.119 on
the right in the display takes you precisely to the turn-off point.If it is necessary to make a lane change before the turn off, you are
warned in plenty of time about this lane change before the turn-off
arrow by a second arrow
page 111, fig.114.
Tips
With active guidance, you can switch to the trip computer display*
by pressing the trip computer reset button*. Pushing the trip
c o mp ut e r re s e t b ut to n * a g a in r e t ur n s y o u to g u i d a n c e . Yo u c a n fin d
detailed information about the trip computer* in the Owner's
Manual.Selecting navigation function
The navigation functions can be selected with the
function button.Fig. 120 Display: Main navigation menu
Display
Short descriptionDistance remaining to next turn pointEstimated time of arrival at destination or current
stopoverDirectional arrowLocation-dependent display of freeway, highway
and street names
An arrow before the display identifies the name of
the street onto which you should turn.Total kilometers to destination or current stopoverChange of direction arrowBar graph (countdown): bars decreasing in size indi-
cate how the distance to the immediate turn-off
point is decreasing; the bar graph is not shown until
a change of direction arrow is displayed.If there is another side street before the turn-off
point which is not part of current guidance, this side
street is represented by a side-street symbol in the
instrument cluster display.
A1AA AA4A9A:A
NAV

Navigation (NAV) 130
– Select Start route guidance
page 129, fig.135, the
route is calculated and the map display is shown auto-
matically.
– Select one of the routes suggested in the single destina-
tion mode
page 130 on the map display by rotating
and pressing the control knob.
– In the route plan map display, confirm the route
suggested
page 132 by rotating and pressing the
control knob.After calculating route guidance, the Navigation System switches
a ut o ma t i c a l ly to ma p d i s p l a y m o d e . The ro u t e g u id a n c e i s s h o w n in
simplified form in the instrument cluster display
page 113. You
are additionally receive navigation voice prompts page 112.
When you have entered a final destination
page 119 and started
route guidance, you are offered up to three different routes to reach
your destination
page 119.
When you have entered a route plan and started route guidance,
you are shown the route with the different stopovers and various
information in the overview
page 132.
Entered destinations can be saved
page 135 and
page 137.
Route criteria
page 141 can be changed at anytime during guid-
ance, and the route will be recalculated.
If you do not complete route guidance you started, this route guid-
a n c e wi l l b e c o n t i n u e d t he n e x t t i m e t h e v e h i c l e i s s t a r t e d . Th is a l s o
applies to destinations entered which cannot be reached because of
local conditions (e.g. lake or tourist attraction). If you would like to
terminate this route guidance, select Cancel route guidance
page 132
Tips
Calculated destinations can also be changed in the map display by
moving the crosshairs
page 149
Single destination information before route guidanceFig. 136 Navigation: Example of map display after route has been calculatedWhen you have entered the destination data
page 117
and the road network allows, you are offered up to three
different routes to choose from.
– Select one of the optional routes by rotating the control
knob.

Navigation (NAV)143
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP the map by light grey lines
f i g .1 4 9 . Th e r e i s n o r o u t e g u i d a n c e f o r
IPD sections, instead you are guided by directional arrows
fig.149. These directional arrows point in the compass direc-
tion/a direct line to the destination.
I f y o u s h o u l d b e s t a r t i n g y o u r r o u t e g u i d a n c e i n a n I P D a r e a , y o u w i l l
initially be guided by directional arrows. As soon as you leave the
IPD area, route guidance will start . In
page 142, fig.149 an
example is shown of a directional arrow in an IPD area.
If your destination should lie in an IPD area, the Navigation System
will guid e you up to the star t of the IPD area. In the IPD area you will
be guided by directional arrows.
If your route guidance includes an IPD area, you will be advised of
this by a voice message when route guidance starts (“It is possible
that there a re un fore seen tra ffic reg ulations on the way to the des ti-
nation.”).
Tips
Route guidance is additionally shown by directional arrows in the
instrument cluster display
page 113 or
page 114. In an IPD
area, the directional arrows in the instrument cluster display point
in the compass direction/a direct line to the destination.
Map and information displayFig. 150 Navigation: Example of map display with inactive side menu
Fig. 151 Navigation: Example of map display with activated turn list
A
A1