wheel AUDI A8 1995 D2 / 1.G AHA Engine On Board Diagnostic Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 1995, Model line: A8, Model: AUDI A8 1995 D2 / 1.GPages: 97, PDF Size: 0.31 MB
Page 14 of 97

01-9
      
Connecting  
    
Notes: 
 Scan tool operating instructions    -  Locate Data Link Connector (DLC), under driver's knee bar to left of 
steering wheel. 
-  Connect VAG1551 Scan Tool (ST) with VAG1551/3 adapter cable to 
DLC. 
-  Switch ignition on, or start engine, depending on function to be 
selected (   page 01
-5 ). 
If scan tool displays do not appear as indicated:If "Error in communication link" is displayed, disconnect adapter cable 
at scan tool, reconnect, and repeat procedure. 
-  Operate scan tool and advance through program sequence by 
following display: 
  -  Press button -1- to select "Rapid data transfer" operating mode 01.
  -  Press buttons -0- and -1- to insert "Engine Electronics" address word 
01, and press -Q- button to confirm input. 
Pa
ge 14 of 97 On Board Dia
gnostic 
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1 
Page 20 of 97

01-14
 ECM coding variations
 
Country/Emissions  
Drivetrain/Options  
Transmission  
Vehicle type  
00 
=  ------------------   0 
=  Front-wheel-drive without 
traction control (ASR)  0 
=  5-speed manual   0 
=  ------------
------  
01 
=  ------------------   1 
=  Front-wheel-drive with traction 
control (ASR)  1 
=  ------------------   1 
=  A4  
02 
=  ------------------   2 
=  All-wheel-drive without traction 
control (ASR)  2 
=  ------------------   2 
=  ------------
------  
03 
=  ------------------   3 
=  All-wheel-drive with traction 
control (ASR)  3 
=  ------------------   3 
=  ------------
------  
04 
=  ------------------   4 
=  ------------------   4 
=  ------------------   4 
=  ------------
------  
05 
=  ------------------   5 
=  ------------------   5 
=  Automatic trans. 
01V  5 
=  ------------
------  
06 
=  USA, equipped with EVAP system Leak 
Detection Pump (LDP)  6 
=  ------------------   6 
=  ------------------   6 
=  ------------
------  
Pa
ge 20 of 97 On Board Dia
gnostic 
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1 
Page 21 of 97

01-15
 
Code number structure (example)  
  
  
  
  
  
USA vehicle with Leak Detection Pump (LDP):   0   6           
Front-wheel-drive without traction control (ASR):         0        
Automatic transmission 01V:            5     
Audi A4:               1  
Code number:   0   6   0   5   1  Note:  
Vehicles with traction control (ASR) can be recognized by the ASR control light in the instrument cluster or by ABS/ASR On 
Board Diagnostic (OBD). 
 Repair Manual, Brake System, Repair Group 01  
Pa
ge 21 of 97 On Board Dia
gnostic 
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1 
Page 85 of 97

01-62
 
Display group 000 (display in decimal values)  
 
Engine running at idle; ECM in "Basic Setting" function 04 
Display fields    
Specified 
value  Corresponds to  
1 
  2  
3   4  
5   6  
7   8  
9   10  
Idle learn value (additive) for O2S control, bank 2   115-141   -0.65 to +0.65 
ms  
     
     
     
     
  
Idle learn value (additive) for O2S control, bank 1  
115-141  
  
  
-0.65 to +0.65 
ms  
     
     
     
      O2S control bank 2 (if outside of tolerance, conduct test 
drive)  77-179   -10 to +10 %  
     
     
     
  
O2S control bank 1 (if outside of tolerance, conduct test 
drive)  
77-179  
-10 to +10 %  
     
     
      Learn value-idle air flow   118-138   -5.0 to +5.0 kg/h  
     
     
  
Idle air control value  
118-138  
-5.0 to +5.0 kg/h  
     
      Throttle angle   0-12  
0-5   
     
  
Engine speed (with electrical consumers switched off)  
All-wheel drive vehicles  
Front-wheel drive vehicles  
  
62-74  
74-86  
  
620-740 RPM  
740-860 RPM  
     
Engine load (with electrical consumers switched off)   20-50   1.0-2.5 ms  
Pa
ge 85 of 97 On Board Dia
gnostic 
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1 
Page 89 of 97

01-64
 
Display field 3  
Possible malfunction cause  
Corrective action  
less than 62  
(all-wheel drive)  
or  
less than 74  
(front-wheel drive)   
Drive range selected
 Throttle valve control module faulty- Move selector lever to "P" or "N" position
- Check idle speed   page 24
-16
- Check throttle valve control module   page 24
-128
 
less than 74  
(front-wheel drive)   
Supply voltage (terminal 15) to terminal 10 
of Engine Control Module (ECM) missing - Check supply voltage (terminal 15) to terminal 
10 of ECM using applicable wiring diagram 
greater than 74  
(all-wheel drive)  
or  
greater less than 86 
(front-wheel drive)   Closed Throttle Position (CTP) switch open
 Throttle valve control module faulty
 Intake air leaks ("false air")- Check idle speed   page 24
-16
- Check throttle valve control module   page 24
-128
 
- Check intake air system for leaks   page 24
-
126
 
Pa
ge 89 of 97 On Board Dia
gnostic 
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1