belt AUDI A8 1996 D2 / 1.G AHA ATQ Engines Lubrication System Components Workshop Manual

17-2


Oil pump, cylinder block breather and oil
spray jets, removing and installing

Oil pan (upper part) and oil pan (lower part),
removing and installing page 17
-10
.
1 -
Bolt
20 Nm (15 ft lb)
2 -
Washer
3 -
Tensioner roller For toothed belt
4 -
Bolt 45 Nm (33 ft lb)
5 -
Bolt 10 Nm (7 ft lb)For toothed belt
6 -
Bolt 10 Nm (7 ft lb)
7 -
Bolt 10 Nm (7 ft lb)
Pa
ge 3 of 34 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.17.1

17-26

Front oil seal carrier and oil pump chain,
removing and installing


Removing

- Remove ribbed belt page 13
-8 .

- Remove toothed belt page 13
-12
.

- Remove oil pan (upper part) and oil pan (lower
part) page 17
-10
.

- Before removing front oil seal carrier, remove following components:
1 - Toothed belt tensioner roller
Tightening torque: 20 Nm (15 ft lb)
2 - Idler roller
Tightening torque: 45 Nm (33 ft lb)
3 - Toothed belt tensioner
Tightening torque: 20 Nm (15 ft lb)
4 - Toothed belt tensioner lever
Tightening torque: 20 Nm (15 ft lb)
5 - Crankshaft center bolt and toothed belt sprocket
Pa
ge 31 of 34 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.17.1