AUDI A8 1996 D2 / 1.G AHA Engine Auxiliary Signals Checking User Guide

Manufacturer: AUDI, Model Year: 1996, Model line: A8, Model: AUDI A8 1996 D2 / 1.G
Pages: 22, PDF Size: 0.09 MB
AUDI A8 1996 D2 / 1.G AHA Engine Auxiliary Signals Checking User Guide A8 1996 D2 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1041/w960_1041-0.png AUDI A8 1996 D2 / 1.G AHA Engine Auxiliary Signals Checking User Guide
Search: (spare wheel, maintenance reset, towing, cabin filter, oil viscosity, fuse diagram)
Trending: fuel, diagram, fuse, transmission, ABS, odometer, check engine
Jump to page (1-22):

Page 11 of 22

AUDI A8 1996 D2 / 1.G AHA Engine Auxiliary Signals Checking User Guide 24-170 Display fields 1 2 3 4 Display group 5: General engine data Display xxx RPM xx.xx ms xxx km/h Idle Part throt Full throt Decel Enrich Indicates Engine sp

Page 12 of 22

AUDI A8 1996 D2 / 1.G AHA Engine Auxiliary Signals Checking User Guide - Press buttons -0- and -6- to select "End Output" function 06, and press -Q- button to confirm input. - Switch off ignition. Pa ge 12 of 22 Auxiliar y si gnals, checkin g 11/23/2002

Page 13 of 22

AUDI A8 1996 D2 / 1.G AHA Engine Auxiliary Signals Checking User Guide 24-171 Continuation If no speed was indicated: Notes: If the LED does not blink: If the wiring is OK and the LED does not blink: Repair Manual, Electrical Equipment, Repair

Page 14 of 22

AUDI A8 1996 D2 / 1.G AHA Engine Auxiliary Signals Checking User Guide (DTC) memory has been erased, or ECM was disconnected, generate new readiness code page 01 -73 . Pa ge 14 of 22 Auxiliar y si gnals, checkin g 11/23/2002 htt p://127.0.0.1:8080/audi/servlet/Dis p

Page 15 of 22

AUDI A8 1996 D2 / 1.G AHA Engine Auxiliary Signals Checking User Guide 24-172 CAN-Bus, checking When a CAN-Bus malfunction is indicated during a check of DTC memory of the Engine Control Module (ECM), refer to the following test to eliminate the malfunc

Page 16 of 22

AUDI A8 1996 D2 / 1.G AHA Engine Auxiliary Signals Checking User Guide 24-173 Checking - Check DTC memory of Transmission Control Module (TCM). Repair Manual, 5 Spd. Automatic Transmission 01V, Repair Group 01 If a DTC regarding the CAN-B

Page 17 of 22

AUDI A8 1996 D2 / 1.G AHA Engine Auxiliary Signals Checking User Guide 24-174 Rough road signal from ABS/EDL control module, checking Notes: When the ABS/EDL control module senses a wheel spinning, it produces the rough road signal. When the ECM

Page 18 of 22

AUDI A8 1996 D2 / 1.G AHA Engine Auxiliary Signals Checking User Guide Required special tools and test equipment VAG1551 or VAG1552 Scan Tool (ST) with VAG1551/3 adapter cable VAG1598/22 test box Pa ge 18 of 22 Auxiliar y si gnals, checkin g 11/23/2

Page 19 of 22

AUDI A8 1996 D2 / 1.G AHA Engine Auxiliary Signals Checking User Guide 24-175 Test requirements ECM coding OK page 01 -14 Test sequence - Switch ignition off. - Connect VAG1598/22 test box to ECM harness connector page 01 -67 .

Page 20 of 22

AUDI A8 1996 D2 / 1.G AHA Engine Auxiliary Signals Checking User Guide (DTC) memory has been erased, or ECM was disconnected, generate new readiness code page 01 -73 . Pa ge 20 of 22 Auxiliar y si gnals, checkin g 11/23/2002 htt p://127.0.0.1:8080/audi/servlet/Dis p
Page:   < prev 1-10 11-20 21-30 next >
Search: (oil temperature, adblue, lane assist, check transmission fluid, radio antenna, seats)
Trending: ignition, sensor, lights, transmission, wiring, ECU, ABS
Jump to page (1-22):