stop AUDI A8 1997 D2 / 1.G 01V Transmission Oil Pan And Oil Strainer Assembly Workshop Manual

38-21

Oil strainer, removing and installing


Removing

- Removing oil pan page 38
-19
.

Installing
Tightening torque - Removing oil strainer bolts (arrows).
- Pull oil strainer off of valve body.
- Lightly coat seal on suction collar of oil strainer with ATF.
- Carefully press suction collar of oil strainer into the opening at valve
body up to stop.
- Bolt on oil strainer.
- Installing oil pan page 38
-20
.
- Fill up ATF page 37
-140
.
Component
Nm
Oil strainer to valve body 6
Pa
ge 21 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-30

Installing
Installation is reverse of removal, noting the
following:

- Replace O-rings.

Notes: - Insert oil line into 3381 oil line installer.
- Drive oil line into transmission housing by lightly tapping on the 3381 oil
line installer up to stop using a plastic mallet.
The open side of 3381 oil line installer faces toward the outer wall of
the transmission. Do not cant oil line. Drive in both line ends uniformly.
- Installing valve body page 38
-25
.
- Fill up ATF page 37
-140
.
- Checking oil level in front final drive page 39
-1 .
Pa
ge 30 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-32


Installing - Pierce sealing ring using a small screwdriver and pull out.
- Coat outer circumference and gap between sealing lips with ATF.

Installation position: The open side of the sealing ring faces the
transmission.

- Slide new sealing ring onto 3385 sealing ring installer without canting
and drive in up to stop of pressure piece.
- Installing Multi-function switch page 38
-33
.
- Drive back spring dowel sleeve with transmission not yet removed in
opposite direction through the lever.
- Slide transmission shift lever onto shift rod and drive in spring dowel
sleeve.
- Installing left transmission support page 37
-125
.
Pa
ge 32 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1