warning AUDI A8 1998 D2 / 1.G 01V Transmission Drive Pinion Assembly Workshop Manual

39-162


WARNING!
Wear protective gloves! Fig. 7 Pressing large tapered roller bearing inner race onto drive
pinion
-
Heat inner race to approx. 100 C ,position and press on.

Note:
On 3253/4 pressure disc, marking "Oben" points toward nut on installation
device Fig. 8 Pulling in large tapered roller bearing outer race
- Insert previously determined adjustment shim "S3" for drive pinion
page 39
-177
.
Pa
ge 11 of 14 Drive
pinion, removin
g, installin
g, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.14

39-163


Fig. 9 Pressing in small tapered roller bearing outer race
- The outer race must be oiled and installed using VW408A punch and
30-205 thrust pad.

WARNING!
Wear protective gloves! Fig. 10 Pressing on small tapered roller bearing inner race
- Insert drive pinion with a new spacer sleeve.
-
Heat up small tapered roller bearing inner race to approx. 100 C and
insert on drive pinion. - Press drive pinion upward and insert bearing up to stop using 40-21
sleeve.
Pa
ge 12 of 14 Drive
pinion, removin
g, installin
g, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.14