height AUDI A8 1998 D2 / 1.G 01V Transmission Oil Pan And Oil Strainer Assembly Workshop Manual

38-5


10 -
Bracket
For wiring harnessHook in wiring harnessMounted with valve body bolts
11 -
Bolt - 6 Nm
12 -
Transmission Vehicle Speed Sensor (VSS)
-G38- Removing and installing page 38
-40
13 -
Spacer sleeve
Height: 8 mm
14 -
Inner oil line Always replaceRemoving and installing page 38
-29
15 -
O-ring
Always replace
Pa
ge 5 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-8


25 -
Spacer sleeve
Height: 20 mm
26 -
Bolt - 6 Nm
27 -
Bracket For solenoid valve
28 -
Solenoid Valve 4 -N91- With O-ringRemove and install valve body to install
page 38
-22

29 -
Solenoid valve 3 -N90-
Without O-ringRemove and install oil pan to replace
page 38
-19

30 -
Solenoid valve 2 -N89-
Without O-ringRemove and install oil pan to replace
page 38
-19

Pa
ge 8 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-13


11 -
Bolt - 6 Nm
12 -
Transmission Vehicle Speed Sensor (VSS)
-G38-
Removing and installing page 38
-40
13 -
Spacer sleeve
Height: 8 mm
14 -
Inner oil line Always replaceRemoving and installing page 38
-29
15 -
O-ring
Always replace
16 -
Speedometer Vehicle Speed Sensor (VSS)
-G22- Removing and installing page 38
-35
Pa
ge 13 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-37


Installing - Unbolt Sensor for transmission RPM -1- at valve body.
- Tighten Sensor for transmission RPM -1- using spacer sleeves -2-
(height: 20 mm) to 7 Nm.

Installation position: Sensor-side with the connector terminals
points to valve body center.

- Connect connector to Sensor for transmission RPM -1-.
- Installing valve body page 38
-25
.
- Fill up ATF page 37
-140
.
Pa
ge 37 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-40

Transmission Vehicle Speed Sensor
(VSS) -G38-, removing and installing


Removing

- Removing oil pan page 38
-19
.

- Disconnect harness connector from Transmission Vehicle Speed
Sensor (VSS) -G38- (arrow).

Installing - Remove Transmission Vehicle Speed Sensor (VSS) -2-.
- Install and tighten Transmission Vehicle Speed Sensor (VSS) -2- using
spacer sleeve -1- (height: 8 mm) to 6 Nm.
Pa
ge 40 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1