ignition AUDI A8 1998 D2 / 1.G AEB Engine Ignition Coil System Checking
[x] Cancel search | Manufacturer: AUDI, Model Year: 1998, Model line: A8, Model: AUDI A8 1998 D2 / 1.GPages: 11, PDF Size: 0.08 MB
Page 1 of 11

28-17
Individual ignition coil system,
checking
Ignition coils, checking
Notes:
Measuring the primary resistance of the ignition
coils is normally not necessary for this test
(primary resistance approx. 0.4 to 0.6 ,
measured between coil terminals 1 and 15).
A high tension isolation diode is installed in the
secondary circuit of the ignition coil. Measuring
the resistance of the secondary coil is therefore
not possible with conventional measuring
instruments.
Required special tools and test equipment
Multimeter US 1119 (Fluke 83 or equivalent)
VW 1594 connector test kit
Test conditions
No fuel injector malfunction stored in DTC
memory
Pa
ge 1 of 11 Individual i
gnition coil s
ystem, checkin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.28.2
Page 3 of 11

28-18
- By briefly disconnecting fuel injector connectors
with engine running, check which cylinder is
misfiring, or not firing at all.
Note:
A misfiring cylinder can also be isolated by
pulling the spark plug connectors (carbon-fouled
plug).
- Check spark plug connector resistance.
Specified value: approx. 2 k If resistance is NOT OK:
- Reconnect spark plug connector.
- Interchange spark plug with one from cylinder
that is OK.
- If other cylinder now misfires, replace faulty
spark plug.
- If same cylinder misfires, interchange ignition
coil with one from cylinder that is OK.
-
If other cylinder now misfires, replace faulty
Pa
ge 3 of 11 Individual i
gnition coil s
ystem, checkin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.28.2
Page 4 of 11

coil.
- If original cylinder still misfires, check secondary circuit ground
connection for open circuit between coil connector terminal 4a and
engine Ground.
- If Ground connection is OK, check:
Primary wiring and power supply Page 28
-19
Final output stage for ignition coils Page 28
-21
Pa
ge 4 of 11 Individual i
gnition coil s
ystem, checkin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.28.2
Page 5 of 11

28-19
Wiring for primary coil and power
supply, checking
Required special tools and test equipment
VAG 1527B LED voltage tester
VW 1594 connector test kit
Wiring diagrams
Test conditions
Fuse for ignition coils OK
Checking
- Disconnect 4-pin harness connector from power
output stage.
- Switch ignition on.
Note: - Connect VAG 1527B LED voltage tester in turn between 4-pin
connector terminals 1, 2, 3 and 4, and engine ground.
LED must light up for all 4 terminals
Pa
ge 5 of 11 Individual i
gnition coil s
ystem, checkin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.28.2
Page 6 of 11

The power supply for the primary circuit is measured via the fuse and
primary coil of the ignition coil.
Pa
ge 6 of 11 Individual i
gnition coil s
ystem, checkin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.28.2
Page 7 of 11

28-20
If the LED in the tester does not light up:
- Check wiring for open circuits between power output stage and
terminal 1 at each coil connector, according to table.
Specified value: max. 1.5
If the wiring is OK: - Ignition coil connector terminal identification
Black 4-pin connector terminal
number (power output stage) Ignition coil terminal 1 at
connector for cylinder number:
1 1
2 2
3 3
4 4
- Check wiring for open circuit between each coil terminal 15 and fuse
and power supply, according to wiring diagram.
Specified value: max. 1.5
Pa
ge 7 of 11 Individual i
gnition coil s
ystem, checkin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.28.2
Page 8 of 11

28-21
Power output stage for ignition coils,
checking
Required special tools and test equipment
VAG 1598/22 test box
Multimeter US 1119 (Fluke 83 or equivalent)
VAG 1527B LED voltage tester
VW 1594 connector test kit
Wiring diagrams
Note:
To check power output stage, disconnect all
connectors for fuel injectors and then erase DTC
memory.
Pa
ge 8 of 11 Individual i
gnition coil s
ystem, checkin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.28.2