fuel AUDI A8 1998 D2 / 1.G ATQ Engine Check DTC Memory And Erase DTC Memory Workshop Manual

01-24

DTC
DTC text
Corrective action
SAE
VAG


P0300 16684
Combustion misfire detected
1)
- Check fuel pressure Page 24
-30
- Test fuel injectors Page 24
-36
P0301 16685
Cyl. 1 combustion misfire detected
1)
- Check spark plugs and ignition wires with connector
P0302 16686
Cyl. 2 combustion misfire detected 1)
- Check ignition coils Page 28
-7
P0303 16687
Cyl. 3 combustion misfire detected
1)
- Check ignition coils Page 28
-10
P0304 16688
Cyl. 4 combustion misfire detected
1)
- Check misfire recognition Page 28
-52
P0305 16689
Cyl. 5 combustion misfire detected
1)
- Fill fuel tank with fuel
P0306 16690
Cyl. 6 combustion misfire detected 1)

1) For these malfunctions, ECM does not switch on the Malfunction Indicator Lamp (MIL) unless malfunction is recognized
again after another engine start. Meaning of Malfunction Indicator Lamp (MIL) Page 01
-3 .
Pa
ge 13 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2

01-25

DTC
DTC text
Corrective action
SAE
VAG


P0321 16705 Engine Speed (RPM) sensor -G28-
Implausible signal
1) - Check sender for fuel gauge Page 28
-19
P0322 16706 Engine Speed (RPM) sensor -G28-
No signal
1)
P0327 16711 Knock Sensor (KS) 1 -G61-
Signal too small - Check knock sensor Page 28
-41
P0328 16712 Knock Sensor (KS) 1 -G61-
Signal too large
P0332 16716 Knock Sensor (KS) 2 -G66-
Signal too small
P0333 16717 Knock Sensor (KS) 2 -G66-
Signal too large
P0341 16725 Camshaft Position (CMP) sensor -G40-
Implausible signal
1)
- Check Camshaft Position (CMP) sensor Page 28
-45
P0346 16730 Camshaft Position (CMP) sensor -G163-

Implausible signal
1)

1) For these malfunctions, ECM does not switch on the Malfunction Indicator Lamp (MIL) unless malfunction is recognized
again after another engine start. Meaning of Malfunction Indicator Lamp (MIL) Page 01
-3 .
Pa
ge 14 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2

01-28

DTC
DTC text
Corrective action
SAE
VAG


P0441 16825 Tank ventilation
system
Throughput faulty
1) - Check Evaporative Emission (EVAP) Canister Purge Regulator Valve, perform
output Diagnostic Test Mode (DTM) Page 01
-56

P0442 16826 Tank ventilation
system
Small leak
detected
1) - Checking fuel supply and ventilation systems for leaks
P0455 16839 Tank ventilation
system
Large leak
detected 1) Repair Manual, Engine Mechanical, Repair Group 20; Evaporative Emissions
(EVAP) System Diagnosis using KLI9210 EVAP Tester, test EVAP system.
P0456 16840 Tank ventilation
system
Pinhole leak
detected
1) Repair Manual, Engine Mechanical, Repair Group 20; EVAP canister system
components, servicing; tank leak diagnostic, performing.
1) For these malfunctions, ECM does not switch on the Malfunction Indicator Lamp (MIL) unless malfunction is recognized
again after another engine start. Meaning of Malfunction Indicator Lamp (MIL) Page 01
-3 .
Pa
ge 17 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2

01-33

DTC
DTC text
Corrective action
SAE
VAG


P1127 17535 Bank 1, mixture
adaptation (mult.)
System too rich
1) - Road test vehicle (fuel in oil).
- Check fuel system pressure Page 24
-30
P1128 17536 Bank 1, mixture
adaptation (mult.)
System too lean
1) - Check Mass Air Flow (MAF) sensor Page 24
-56
- Check intake system for proper seal Page 24
-64
P1129 17537 Bank 2, mixture
adaptation (mult.)
System too rich
1) - Check oxygen sensor before catalytic converter Page 24
-76
P1130 17538 Bank 2, mixture
adaptation (mult.)
System too lean
1) - Check oxygen sensor behind catalytic converter Page 24
-97
- Check fuel injectors Page 24
-36

P1131 17539 Bank 2, sensor 1
Internal resistance too
large
1) - Next check signal wires for contact resistance => page Page 24
-91
; if there
are no contact resistances: Replace oxygen sensor
1) For these malfunctions, ECM does not switch on the Malfunction Indicator Lamp (MIL) unless malfunction is recognized
again after another engine start. Meaning of Malfunction Indicator Lamp (MIL) Page 01
-3 .
Note:
Pa
ge 23 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2

01-34

DTC
DTC text
Corrective action
SAE
VAG


P1136 17544 Bank 1, mixture
adaptation (add.)
System too lean
1) - Road test vehicle (fuel in oil).
- Check fuel system pressure Page 24
-30
P1137 17545 Bank 1, mixture
adaptation (add.)
System too rich
1) - Check Mass Air Flow (MAF) sensor Page 24
-56
- Check oxygen sensor before catalytic converter Page 24
-76
P1138 17546 Bank 2, mixture
adaptation (add.)
System too lean
1) - Check oxygen sensor behind catalytic converter Page 24
-97
P1139 17547 Bank 2, mixture
adaptation (add.)
System too rich
1) - Check Evaporative Emission (EVAP) Canister Purge Regulator Valve Page
24
-128

P1140 17548 Bank 2, sensor 2
Internal resistance too
large
1) - Next check signal wires for contact resistance => page Page 24
-114
; if
there are no contact resistances: Replace oxygen sensor
1) For these malfunctions, ECM does not switch on the Malfunction Indicator Lamp (MIL) unless malfunction is recognized
again after another engine start. Meaning of Malfunction Indicator Lamp (MIL) Page 01
-3 .
Note:
add = additive, means that malfunction is only valid at closed throttle (idle).
Pa
ge 25 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2

01-36

DTC
DTC text
Corrective action
SAE
VAG


P1149 17557 Oxygen sensor control, bank 1
Unplausible control value - Check oxygen sensor adaptation values and
regulation Page 24
-83

- Check fuel system pressure Page 24
-30
P1150 17558 Oxygen sensor control, bank 2
Unplausible control value - Check intake system for proper seal Page 24
-
64

P1171 17579 Angle sensor -2- for throttle drive (power accelerator
actuation) -G188-
Implausible signal
2)3)
- Check angle sensor -1- for throttle drive Page
24
-148

P1172 17580 Angle sensor -2- for throttle drive (power accelerator
actuation) -G188-
Signal too small
2) 3)

P1173 17581 Angle sensor -2- for throttle drive (power accelerator
actuation) -G188-
Signal too large
2) 3)


2) For these malfunctions, ECM switches on the EPC warning lamp in instrument cluster. Significance of EPC warning lamp
Page 24
-136
.
3) For these malfunctions, ECM switches on the exhaust warning lamp in instrument cluster immediately after recognizing the
malfunction. Meaning of Malfunction Indicator Lamp (MIL) Page 01
-3 .
Pa
ge 27 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2

01-37

DTC
DTC text
Corrective action
SAE
VAG


P1176 17584 Bank 1, oxygen sensor correction behind
catalytic converter
Control limit reached
1) - Check oxygen sensor aging of oxygen sensor before
catalytic converter
Page 24
-93

P1177 17585 Bank 2, oxygen sensor correction behind
catalytic converter
Control limit reached
1) - Check oxygen sensor and oxygen sensor control behind
catalytic converter
Page 24
-97

P1213 17621 Cylinder 1 fuel injector -N30-
Short circuit to B+
1) - Check fuel injectors Page 24
-36
P1214 17622 Cylinder 2 fuel injector -N31-
Short circuit to B+
1)
P1215 17623 Cylinder 3 fuel injector -N32-
Short circuit to B+1)
P1216 17624 Cylinder 4 fuel injector -N33-
Short circuit to B+1)
P1217 17625 Cylinder 5 fuel injector -N83-
Short circuit to B+1)
P1218 17626 Cylinder 6 fuel injector -N84-
Short circuit to B+1)
1) For these malfunctions, ECM does not switch on the Malfunction Indicator Lamp (MIL) unless malfunction is recognized
again after another engine start. Meaning of Malfunction Indicator Lamp (MIL) Page 01
-3 .
Pa
ge 28 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2

01-38

DTC
DTC text
Corrective action
SAE
VAG


P1225 17633 Cylinder 1 fuel injector -N30-
Short circuit to Ground (GND)
1) - Check fuel injectors Page 24
-36
P1226 17634 Cylinder 2 fuel injector -N31-
Short circuit to Ground (GND)
1)
P1227 17635 Cylinder 3 fuel injector -N32-
Short circuit to Ground (GND)1)
P1228 17636 Cylinder 4 fuel injector -N33-
Short circuit to Ground (GND)1)
P1229 17637 Cylinder 5 fuel injector -N83-
Short circuit to Ground (GND)1)
P1230 17638 Cylinder 6 fuel injector -N84-
Short circuit to Ground (GND)1)
1) For these malfunctions, ECM does not switch on the Malfunction Indicator Lamp (MIL) unless malfunction is recognized
again after another engine start. Meaning of Malfunction Indicator Lamp (MIL) Page 01
-3 .
Pa
ge 29 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2

01-39

DTC
DTC text
Corrective action
SAE
VAG


P1237 17645 Cylinder 1 fuel injector -N30-

Open circuit
1) - Check fuel injectors Page 24
-36
P1238 17646 Cylinder 2 fuel injector -N31-

Open circuit
1)
P1239 17647 Cylinder 3 fuel injector -N32-

Open circuit1)
P1240 17648 Cylinder 4 fuel injector -N33-

Open circuit1)
P1241 17649 Cylinder 5 fuel injector -N83-

Open circuit1)
P1242 17650 Cylinder 6 fuel injector -N84-

Open circuit1)
1) For these malfunctions, ECM does not switch on the Malfunction Indicator Lamp (MIL) unless malfunction is recognized
again after another engine start. Meaning of Malfunction Indicator Lamp (MIL) Page 01
-3 .
Pa
ge 30 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2

01-40

DTC
DTC text
Corrective action
SAE
VAG


P1250 17658
Fuel level too low
4)
Repair Manual, Electrical Equipment, Repair Group 01, On Board Diagnostic
(OBD) of instrument cluster; Read Measuring Value Block
- Fill fuel tank with fuel
- Check wire connection between Engine Control Module (ECM) and instrument
cluster according to wiring diagram
- Check signal from sender for fuel gauge and fuel gauge
P1296 17704 Malfunction in cooling
system
1)
Repair Manual, Engine Mechanical, Repair Group 19; Cooling system
components, removing and installing - Check coolant temperature sensor Page 28
-23
- Check coolant regulator
1) For these malfunctions, ECM does not switch on the Malfunction Indicator Lamp (MIL) unless malfunction is recognized
again after another engine start. Meaning of Malfunction Indicator Lamp (MIL) Page 01
-3 .
4) The DTC "Fuel Level Too Low" is stored when there is/was too little fuel in fuel tank. The DTC is stored as a static
malfunction and is not switched to sporadic even if fuel tank has been filled with fuel (e.g. by the customer) in the meantime.
In this way, it can be determined that subsequent malfunctions were caused by lack of fuel, e.g. combustion misfires or
oxygen control related malfunctions.
Pa
ge 31 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2