engine AUDI A8 1999 D2 / 1.G 01V Transmission Read Measuring Value Block E18/2 Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 1999, Model line: A8, Model: AUDI A8 1999 D2 / 1.GPages: 42, PDF Size: 0.14 MB
Page 4 of 42
01-230
Overview of selectable display group numbers for transmission with hydraulic control -E18/2- Indicated on display (example)
Display fields:
1 2 3 4
Display group no.
Display field
Description
Read measuring value block 1
0 RPM 0 RPM 0 RPM 4
001 1
2
3
4 Engine speed (RPM)
Sensor for transmission RPM -G182-
Sensor for transmission output RPM -G195-
Gear selected
Read measuring value block 2
DS 0 % 0 RPM 4 002 1
2
3
4 Actual program
Throttle valve value or accelerator pedal position
Sensor for transmission output RPM -G195-
Gear selected
Read measuring value block 3
PN active 0 km/h 12.8 V 003 1
2
3
4 Brake light switch
"P" "N" lock
Speed
Voltage supply
Pa
ge 4 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 7 of 42
21.0 C 0.747 A TC on 0
RPM
2
3
4 Specified current of Pressure Control Valve 4 for auto.
transmission -N218-
Torque converter lock-up clutch
Torque converter slip speed
Read measuring value block
8
0 % Deceleration
008 1
2
3
4 Kick down switch
Throttle valve value or accelerator pedal position
Deceleration mode/engine under load
Pa
ge 7 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 8 of 42
01-232
Indicated on display (example)
Display fields:
1 2 3 4
Display group no.
Display field
Description
Read measuring value block 9
100 Nm 0 RPM 0 %
009 1
2
3
4 Engine torque (actual)
Engine speed (RPM)
Throttle valve value or accelerator pedal position
Read measuring value block 10
0.00 0 RPM 4 010 1
2
3
4 Torque increase in torque converter
Engine speed (RPM)
Gear selected
Read measuring value block 11
D M-switch up-switch 011 1
2
3
4 Selector lever position
Tiptronic recognition
Tiptronic Switch -F189-
Pa
ge 8 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 9 of 42
Read measuring value block 12
E 56 80 45
012 1
2
3
4 Type of drive, load
Dynamic code number
Drive resistance index
Driver evaluation
Read measuring value block 125
1 0 125 1
2
3
4 Reception of engine messages via CAN-bus
Reception of ABS messages via CAN-bus
Pa
ge 9 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 11 of 42
01-234
Test table for transmissions with hydraulic control -E18/2-
Display
group
number Display
field Description
Test
requirements Spec. value
on V.A.G1551
display Corrective actions
001
1 Engine RPM With engine
running approx.
0...8200
RPM - See DTC table, DTC 17968 / P1560
page 01
-45
2 Sensor for
transmission RPM
-G182- While driving, with
gear selected
1) RPM
- See DTC table, DTC number 17100 /
P0716 page 01
-45
R
approx.
0...8200
1. 1m approx.
0...2000 - Read measuring value block, display
group number 006 or 007 and
determine which elements are faulty or
not activated while driving
Continue
2 approx.
0...8200
3 approx.
0...8200
1) While driving, a second mechanic is required to read specifications.
Pa
ge 11 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 13 of 42
01-236
Display group
number Display
field Description
Test
requirements Spec. value on
V.A.G1551
display Corrective actions
Continued 4
approx. 0...8200
5 approx. 0...8200
Notes for display group number 001, display field 1 to 3;
Test conditions: Shifting process must be finished. Vehicle must not be in deceleration mode (no decline driving or engine
brake).
Pa
ge 13 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 19 of 42
01-242
Display
group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective actions
004
Continue
1 ATF
temperature
While standing with
engine running C
- Perform electrical test page 01
-273
- See DTC table, DTCs 17094 / P0710,
17095 / P0711, 17096 / P0712 and
17097 / P0713 page 01
-45
Notes for ATF temperature:
Temperature of minus 50 C indicates a short circuit to Ground (GND), Temperature of minus 180 C indicates a short circuit to B+ or an open circuit,
Pa
ge 19 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 25 of 42
01-247
Display group
number Display
field Description
Test
requirements Spec, value on
V.A.G1551
display Corrective
actions
004
4 Information of On Board
Diagnostic (OBD)
Indicated on display from left
to right While driving
1)
Malfunction display Switched on
1
Switched off 0
Trip Completed 1
Not completed 0 Not applicable
Transmission warm-up
Completed 1
Not completed 0
Engine start
Recognized 1
Not
recognized 0
1) While driving, a second mechanic is required to read specifications.
Pa
ge 25 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 31 of 42
01-253
Display
group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective actions
007
4 Torque
converter (TC)
slip speed While
driving
1) TC open 0......standstill
RPM
Repair Manual, 5 Spd.
Automatic Transmission 01V, Repair Group 37,
- Check ATF oil level
- See DTC table, DTC number
17105 / P0721 and 17125/P0741
page 01
-45
TC control
(last shift
process at
least 20
seconds ago) 20...120 RPM
Repair Manual, 5 Spd.
Automatic Transmission 01V, Repair Group 37,
- Determine which element is
faulty or not activated,
transmission with shift elements
TC closed 0...20 RPM
- Check plausibility between
engine RPM, transmission input
RPM and transmission RPM,
display group number 001
1) While driving, a second mechanic is required to read specifications.
Note:
Pa
ge 31 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 34 of 42
01-255
Display
group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective actions
008
1
Kick down switch -F8- Kick-
down
operated
2)
Kick-down - Check kick-down
switch, perform
electrical test page
01
-273
not operated -
2 Throttle valve value or
value from accelerator
pedal position While
standing idle 0...1 % When accelerating from
idle to Wide Open
Throttle (WOT), %-value
increases steadily.
Wide Open
Throttle
(WOT)
99...100 % - See DTC table, DTC
18269 / P1861 page
01
-45
- See also display group
number 002, display
field 2
3 Signal for
deceleration/engine under
load While
driving
1) Deceleration
mode Deceleration For down-hill or delay
(engine braking)
Engine under
load
- Engine is under load
during normal driving
conditions.
Pa
ge 34 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14