check engine AUDI A8 2000 D2 / 1.G 01V Transmission Drive Shaft Service Workshop Manual

39-84


Repair Manual, Engine Mechanical, Repair Group 26; removing and
installing exhaust system If a new driveshaft is installed and the factory color marking on the
rear final drive flange is no longer visible, check radial run out at
flange/driveshaft page 39
-86
and adjust color marking at driveshaft
to new marking at flange.
After disconnecting driveshaft from rear final drive, an additional
balance washer (thick washer) that may be located between shim and
bolt head may not be reinstalled. Replace driveshaft bolts (self-locking).
- Adjust driveshaft after installing page 39
-88
.
- Install exhaust system free of stress:
Pa
ge 13 of 23 Driveshaft, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.5