AUDI A8 2000 D2 / 1.G 01V Transmission Electrical Testing Repair Manual

12 52
1.5

13 22
1.5
Pa
ge 51 of 66 Electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.16

01-305

Terminal on
16-pin connector Socket on VAG1598/20
adapter Specification
Corrective action
14 21
1.5
- Repair open circuit according to current wiring diagram.
- Check connectors
15 Vacant
16 53
1.5
Notes:

If the readings in these tests match the specifications, check the wiring harness in the transmission.

Repair Manual, 5 Spd. Automatic Transmission 01V, Repair Group 38; removing and installing valve body

Only replace relevant solenoid valves if there are no faults found in the wiring harness in the transmission.

Repair Manual, 5 Spd. Automatic Transmission 01V, Repair Group 38, valve body removing and installing

Pa
ge 52 of 66 Electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.16

01-306

Multi-function Transmission Range (TR)
switch, checking


Note:

Check the measuring value block for the TR-
switch display group number 004 page 01
-
203
before checking the TR-switch.

Be sure that selector lever cable is properly
adjusted.

Two different multi-function switches were
used in production:
1. Multi-function switch with 8 - pin connector
checking starting page 01
-308
.
2. Multi-function switch with 10 - pin connector
checking starting page 01
-319
.
Pa
ge 53 of 66 Electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.16

01-307

Multi-function Transmission Range (TR)
switch -F125- (8-pin connector), testing

1. Function test

- Release spring catch securing 8-pin connector -2- to connector on
wiring to multi-function TR switch.
- Unclip connector to multi-function TR switch from retainer or remove
retainer together with connector from transmission to gain better
access to the pins in the connector.

- Pin assignment for 8 - pin connector of Multi-function (TR) switch -
F125-
- Use multi-meter VAG 1526A or Vehicle Diagnosis, Measuring and
Information System VAS 5051.
Pa
ge 54 of 66 Electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.16

01-308
Transmission with Multi-function Transmission Range (TR) switch -F125- with 8 - pin connector, checking
Resistance measurement: switch multimeter to 2 M measuring range
Test
step Connector
pins at F 125 Test of
Test conditions
- Additional stepsSpecified
value Corrective action
1 1 + 7
1 + 6 Multi-function
TR switch -
F126- Ignition switched
off
- Selector lever in P,
R, N, D, 4, 3, and 2 infinitive
1)
- Check connector on multi-function
TR switch for corrosion, water ingress
or loose connection

1 + 2
Ignition switched
off
- Selector lever in P,
N, and D smaller than
2
Repair Manual, 5 Spd. Automatic
Transmission 01V, Repair Group 37
- If necessary adjust selector lever
cable

- Selector lever in R,
4, 3, and 2 infinitive
1)

1 + 3

Ignition switched
off
- Selector lever in R,
N, and 4 smaller than
2

Continue


Ignition switched
off infinitive
1)
Repair Manual, 5 Spd. Automatic - Replace multi-function TR switch
Pa
ge 55 of 66 Electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.16

- Selector lever in P,
D, 3, and 2 Transmission 01V, Repair Group 38

1) Switch VAG1526 to highest resistance ( ) measuring range.
Pa
ge 56 of 66 Electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.16

01-309
Transmission with Multi-function Transmission Range (TR) switch -F125- with 8 - pin connector, checking
Resistance measurement: switch multimeter to 2 M measuring range
Test step
Connector pins
at F 125 Test
of
Test conditions
- Additional stepsSpecified
value Corrective action
Continued

1 1 + 4 Ignition switched
off
- Selector lever in N,
D, 4, and 2 infinitive
1)

- Check connector on multi-function TR
switch for corrosion, water ingress or loose
connection

1 + 5
- Selector lever in P,
R, and 3 infinitive
1)

- If necessary adjust selector lever cable

Ignition switched
off
- Selector lever in D,
4, and 3 smaller than
2
Repair Manual, 5 Spd. Automatic
Transmission 01V, Repair Group 37


1 + 8

- Selector lever in P,
R, N, and 2 infinitive
1)



Ignition switched
off
- Selector lever in Rsmaller than
2
Continue
- Selector lever in P, infinitive
- Replace multi-function TR switch
Pa
ge 57 of 66 Electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.16

N, D, 4, 3, and 2
1)
Repair Manual, 5 Spd. Automatic
Transmission 01V, Repair Group 38

1) Switch VAG1526 to highest resistance ( ) measuring range.
Pa
ge 58 of 66 Electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.16

01-310
Transmission with Multi-function Transmission Range (TR) switch -F125- with 8 - pin connector, checking
Resistance measurement: switch multimeter to 2 M measuring range
Test step
Connector
pins at F 125 Test of
Test conditions
- Additional stepsSpecified
value Corrective action
Continued
to
1 6 + 7 Part No. signal of
Multi-function TR
switch Ignition switched
off
- Selector lever in R,
D, 4, 3, and 2 infinitive
1)
Repair Manual, 5 Spd.
Automatic Transmission 01V, Repair Group 38
- Replace multi-function TR switch

Ignition switched
off
- Selector lever in P,
and N less than 2

The Part No. signal for the Engine
Control Module (ECM) is being
checked
1) Switch VAG1526 to highest resistance ( ) measuring range. Note:

If function check was OK, check voltage supply to Multi-function TR switch -F125- page 01
-311

Pa
ge 59 of 66 Electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.16

01-311

2. Multi-function Transmission Range (TR)
switch -F125- (8-pin connector), testing

- Release spring catch securing 8-pin connector -2- to connector on
wiring to Multi-function TR switch.
- Check at connector with spring clips (cavities) to Transmission Control
Module (TCM)

Voltage measurement: switch multimeter to 20 V measuring range - Pin assignment for 8 - pin connector of multi-function (TR) switch -
F125- (to TCM)
- Use multi-meter VAG 1526A or Vehicle Diagnosis, Measuring and
Information System VAS 5051 Cavity in connector Test condition Specified value
1 + 6 Ignition switched on Approx. battery voltage
Pa
ge 60 of 66 Electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.16