brake light AUDI A8 2000 D2 / 1.G 01V Transmission Electrical Testing Workshop Manual

AUDI A8 2000 D2 / 1.G 01V Transmission Electrical Testing Workshop Manual A8 2000 D2 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1218/w960_1218-0.png AUDI A8 2000 D2 / 1.G 01V Transmission Electrical Testing Workshop Manual

Page 7 of 66

AUDI A8 2000 D2 / 1.G 01V Transmission Electrical Testing Workshop Manual 01-277
 88-pin connector for Transmission Control Module (TCM) -J217- (sockets on VAG1598/20)  
1-   Solenoid valve 5 -N92-   18-
  Kick-down switch -F8- (not for E-gas and V6-TDI)  
2-   Shift lock s

Page 12 of 66

AUDI A8 2000 D2 / 1.G 01V Transmission Electrical Testing Workshop Manual 01-280
 List of test steps (88-pin connector)  
 
Only perform test steps for the relevant component, as listed in DTC and Read Measuring Value Block tables.
Item checked    
Item checked    
Supply v

Page 16 of 66

AUDI A8 2000 D2 / 1.G 01V Transmission Electrical Testing Workshop Manual 01-283
 
Voltage measurement: switch multimeter to 20 V measuring range  
Test step  
VAG  
1598/20  
sockets  Test of  
Test conditions 
- Additional stepsSpecified  
value  Corrective action  
3 
1)

Page 17 of 66

AUDI A8 2000 D2 / 1.G 01V Transmission Electrical Testing Workshop Manual 1) This test cannot be performed on vehicles with E-gas. The signal is transmitted from brake light switch or brake test switch 
to Engine Control Module (ECM). The ECM then forwards the signal to the