ECO AUDI A8 2000 D2 / 1.G 01V Transmission Read Measuring Value Block E18/2 Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2000, Model line: A8, Model: AUDI A8 2000 D2 / 1.GPages: 42, PDF Size: 0.14 MB
Page 8 of 42
01-232
Indicated on display (example)
Display fields:
1 2 3 4
Display group no.
Display field
Description
Read measuring value block 9
100 Nm 0 RPM 0 %
009 1
2
3
4 Engine torque (actual)
Engine speed (RPM)
Throttle valve value or accelerator pedal position
Read measuring value block 10
0.00 0 RPM 4 010 1
2
3
4 Torque increase in torque converter
Engine speed (RPM)
Gear selected
Read measuring value block 11
D M-switch up-switch 011 1
2
3
4 Selector lever position
Tiptronic recognition
Tiptronic Switch -F189-
Pa
ge 8 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 11 of 42
01-234
Test table for transmissions with hydraulic control -E18/2-
Display
group
number Display
field Description
Test
requirements Spec. value
on V.A.G1551
display Corrective actions
001
1 Engine RPM With engine
running approx.
0...8200
RPM - See DTC table, DTC 17968 / P1560
page 01
-45
2 Sensor for
transmission RPM
-G182- While driving, with
gear selected
1) RPM
- See DTC table, DTC number 17100 /
P0716 page 01
-45
R
approx.
0...8200
1. 1m approx.
0...2000 - Read measuring value block, display
group number 006 or 007 and
determine which elements are faulty or
not activated while driving
Continue
2 approx.
0...8200
3 approx.
0...8200
1) While driving, a second mechanic is required to read specifications.
Pa
ge 11 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 12 of 42
01-235
Display
group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective actions
001 2 While
driving
1) With gear
selected RPM
- See previous page
4 approx.
0...8200
5 approx.
0...8200
3 Sensor for
transmission output
RPM -G195- While driving, with gear
selected1) RPM
- See DTC table, DTC
number 17105 / P0721
page 01
-45
R
approx.
0...2000
1. 1m approx.
0...2000 - Read measuring value
block, display group number
006 or 007
Continued
2 approx.
0...4000 - Determine while driving
which elements are faulty
and which aren't active
3 approx.
0...5800
1) While driving, a second mechanic is required to read specifications.
Pa
ge 12 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 14 of 42
01-237
Display
group
number Display
field Description
Test requirements
Specification for
display on
V.A.G1551 Corrective actions
001
4 Gear
selected While
driving
1) Selector
lever
position
- Check solenoid valves. See
display group numbers 005,
006 and 007
"N"
"1"..."5"
2)
- See DTC table, DTC of
respective solenoid valves
page 01
-45
"R" "R"
- Check selector lever
position. Display group
number 004
"D" "1m" "2" "3" "4" "5"
"4" "1m" "2" "3" "4"
"3" "1m" "2" "3"
"2" "1m" "2"
1) While driving, a second mechanic is required to read specifications. 2) Transmission Control Module (TCM) is equipped with an automatic gear follower. The forward gear is indicated that the
TCM would activate in selector lever position "D".
Notes for display field 4 of display group number 001:
Faulty solenoid valves or other DTCs can prevent the selection of certain gears.
Pa
ge 14 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 15 of 42
01-238
Display
group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective actions
002 1 Actual
program
In normal driving
conditions
1)
Determined by driving style and street
conditions (acceleration, accelerator
pedal movement, speed and load)
Dynamic shift
program is active
DS Shifting avoided whenever possible
Warm-up program
is active
WL Up-shifting occurs faster to avoid high
RPM.
Anti-Slip Regulation
(ASR) active
AS - Check display group number 004
Continue
Tiptronic recognition
activated
TT - See DTC table, DTC 18141/P1733 to
18152/P1744 page 01
-45
1) While driving, a second mechanic is required to read specifications.
Pa
ge 15 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 16 of 42
01-239
Display
group
number Display
field Description
Test requirements
Spec. value
on V.A.G1551
display Corrective actions
002
2 Throttle valve value or
value from accelerator
pedal position While
standing Idle 0...1 % When accelerating from idle
to Wide Open Throttle
(WOT), %-value increases
steadily.
Wide Open
Throttle
(WOT)
99...100 % - Perform electrical test
page 01
-273
- See DTC table, DTC
18269 / P1861 page 01
-
45
3 Sensor for transmission
output RPM -G195- While driving
1)
0...8200
- See DTC table, DTC
number 17105 / P0721
page 01
-45
- See display group number
001
4 Gear selected See display group number 1, display field 4
1) While driving, a second mechanic is required to read specifications.
Pa
ge 16 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 18 of 42
01-241
Display
group
number Display
field Description
Test
requirements Spec. value on
V.A.G1551
display Corrective actions
003
3 Speed
While driving
1)
km/h
- If necessary, check speedometer
vehicle speed sensor (VSS) -G22-
4 Supply voltage,
terminal 15 While
standing
min.
10.0 V - Perform electrical test page
01
-273
max. 16.0 V
- See DTC table, DTC
18158/P1750 and 18159 / P1751
page 01
-45
1) While driving, a second mechanic is required to read specifications.
Note for display field 3, speed:
Display of the speedometer and values at VAS 5051 or V.A.G 1551 may deviate slightly from each other.
Pa
ge 18 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 25 of 42
01-247
Display group
number Display
field Description
Test
requirements Spec, value on
V.A.G1551
display Corrective
actions
004
4 Information of On Board
Diagnostic (OBD)
Indicated on display from left
to right While driving
1)
Malfunction display Switched on
1
Switched off 0
Trip Completed 1
Not completed 0 Not applicable
Transmission warm-up
Completed 1
Not completed 0
Engine start
Recognized 1
Not
recognized 0
1) While driving, a second mechanic is required to read specifications.
Pa
ge 25 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 26 of 42
01-248
Display
group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective actions
005
1 Solenoid valve
1 -N88- While
driving
1) Gear selected
- Check whether display
is the same as on shift
lever display
R. N, D, (1 and 2 (1
gear), Shift-down from
5 to 4 gear X
D (3 and 4 gear) 0
- Perform electrical test
page 01
-273
2 Solenoid valve
2 -N89- While
driving
1) Gear selected
Continue
N, D (1, 2 and 3
gear) X
- Perform electrical test
page 01
-273
R, D (4 and 5 gear) D,
down-shift 5 to 4 0
1) While driving, a second mechanic is required to read specifications.
Notes for display group number 5, display field 1 to 3;
Unswitched solenoid valves (inactive) are indicated with "0", switched solenoid valves (active) are indicated with "1".
Pa
ge 26 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 27 of 42
01-249
Display
group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective actions
005
3 Solenoid valve
3 -N90- While
driving
1) Gear selected
- See DTC table, DTC
17145/P0761, 17146/P0762 and
17147/P0763 page 01
-45
D (down-shift 5
to 4 gear) X
D (3, 4. and 5
gear) x or 0
2)
- Perform electrical test page
01
-273
R, N, D (1 and
2 gear) 2 (1
gear) 0
4 Gear selected See display group number 001, display field 4 1) While driving, a second mechanic is required to read specifications. 2) The solenoid valve is switched momentarily while driving, meaning that the mode changes from display "0" to "X" and then
again to "0". This switching in these gears is not relevant.
Notes for display group number 5, display field 1 to 3;
Unswitched solenoid valves (inactive) are indicated with "0", switched solenoid valves (active) are indicated with "1".
Pa
ge 27 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14