heater AUDI A8 2000 D2 / 1.G AHA Engine Multiport Fuel Injection And Ignition System Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2000, Model line: A8, Model: AUDI A8 2000 D2 / 1.GPages: 166, PDF Size: 0.91 MB
Page 1 of 166

24-1
 
  
Motronic Multiport Fuel 
Injection (MFI) and ignition 
system Component locations
 
Data Link Connector (DLC) 
Fuel pump relay 
Oxygen Sensor (O2S) behind Three Way 
Catalytic Converter (TWC) -G130-, with Oxygen 
Sensor (O2S) heater -Z29-   
Located under knee bar, left side of steering 
wheel 
 Position 6 on relay panel in driver's side footwell
 Bank 1, sensor 2
 In exhaust system behind TWC
Pa
ge 1 of 166 Motronic Multi
port Fuel In
jection 
(MFI
) and i
gnition s
ystem
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.1 
Page 2 of 166

24-2
 
  
Oxygen Sensor (O2S) 2 behind Three Way 
Catalytic Converter (TWC) -G131-, with Oxygen 
Sensor (O2S) heater -Z30- 
EVAP system Leak Detection Pump (LDP) -
V144-   
Bank 2, sensor 2
 In exhaust system behind TWC
 In left-rear wheelhousing behind splash shield
Pa
ge 2 of 166 Motronic Multi
port Fuel In
jection 
(MFI
) and i
gnition s
ystem
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.1 
Page 3 of 166

24-3
 
  
1 - 
Harness connector 
For O2S behind TWC -G130- and O2S 
heater -Z29- 4-pin connector, greenFor bank 1, sensor 2
2 - 
Harness connector For O2S 2 behind TWC -G131- and O2S 2 
heater -Z30- 4-pin connector, brownFor bank 2, sensor 2
3 - 
Harness connector For HO2S -G39- with O2S heater -Z19-4-pin connector, blackFor bank 1, sensor 1
4 - 
Harness connector For Knock Sensor (KS) 1 -G61-3-pin connector, blue
5 - 
Secondary Air Injection (AIR) solenoid 
valve -N112- 
Pa
ge 3 of 166 Motronic Multi
port Fuel In
jection 
(MFI
) and i
gnition s
ystem
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.1 
Page 4 of 166

24-4
 
  
6 - 
Intake Air Temperature (IAT) sensor -G42- 
7 - 
Harness connector 
For HO2S 2 -G108- with O2S heater -Z28-4-pin connector, blackFor bank 2, sensor 1
8 - 
Harness connector For Knock Sensor (KS) 2 -G66-3-pin connector, blue
9 - 
Harness connector For engine speed (RPM) sensor -G28-3-pin connector, gray
10 - 
Electronics box (E-box) 
  Contains:Motronic Engine Control Module (ECM) -
J220- Secondary Air Injection (AIR) pump relay -
J299- 
Pa
ge 4 of 166 Motronic Multi
port Fuel In
jection 
(MFI
) and i
gnition s
ystem
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.1 
Page 5 of 166

24-5
 
  
11 - 
Valve 2 for camshaft adjustment -N208- 
12 - 
Camshaft Position (CMP) sensor -G163-, 
bank 1 
13 - 
Heated Oxygen Sensor (HO2S) -G39- with 
Oxygen Sensor (O2S) heater -Z19- 
Bank 1, sensor 1
14 - 
Ground (GND) connection To right engine support
15 - 
Mass Air Flow (MAF) sensor -G70- 
Pa
ge 5 of 166 Motronic Multi
port Fuel In
jection 
(MFI
) and i
gnition s
ystem
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.1 
Page 7 of 166

24-7
 
  
21 - 
Engine speed (RPM) sensor -G28- 
In transmission housing above differential
22 - 
Camshaft Position (CMP) sensor -G40-, 
bank 2 
23 - 
Heated Oxygen Sensor (HO2S) 2 -G108- 
with Oxygen Sensor (O2S) heater -Z28- Bank 2, sensor 1
24 - 
Knock Sensor (KS) 2 -G66- 
25 - 
Ignition coils and power output stage 
  Includes:Ignition coil -N-Ignition coil 2 -N128-Ignition coil 3 -N158-Power output stage -N122-
Pa
ge 7 of 166 Motronic Multi
port Fuel In
jection 
(MFI
) and i
gnition s
ystem
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.1 
Page 9 of 166

24-9
      
Safety precautions
 
     
WARNING! 
     
Fire hazard! Do not smoke, work near 
heaters or open flame, or have anything 
nearby that could ignite fuel. The fuel system 
is under pressure. Before opening, cover 
connections with a rag, and open carefully to 
release pressure. 
     When driving or riding in an airbag-equipped 
vehicle, NEVER hold the scan tool or other 
test equipment in your hands or lap while in 
motion. Objects between you and the airbag 
increase the risk of injury in an accident. 
     During a test drive in an airbag-equipped 
vehicle, test equipment must always be 
fastened to and operated from the rear seat 
by a second technician. 
Pa
ge 9 of 166 Motronic Multi
port Fuel In
jection 
(MFI
) and i
gnition s
ystem
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.1 
Page 34 of 166

24-26
      
Continuation  
      If the value in either display field 1 or 3 is NOT 
OK, or if the value does not fluctuate by at least 2 
%:  
     
-  Road test to condition oxygen sensor(s) 
(eliminate possible contamination) and repeat 
test. 
      If the value in either display field 1 or 3 is still 
NOT OK, or if it still does not fluctuate by at least 
2 %:  
     
-  Check Oxygen Sensor (O2S) heater(s)   page 
24
-34
 . 
      If the value in either display field 1 or 3 remains 
constant:  
     
-  Check oxygen sensor voltage(s) (display fields 2 
and 4). 
     
- 
Press  button.      
-  Press buttons -0- and -6- to select "End Output" 
function 06, and press -Q- button to confirm 
input. 
     
Pa
ge 34 of 166 Motronic Multi
port Fuel In
jection 
(MFI
) and i
gnition s
ystem
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.1 
Page 36 of 166

24-27
 Evaluation of display group 32  Display group: 
32  
  
  
Display fields: 
1-4  
Possible malfunction cause  
Corrective action  
O2S control 
learning value:  
-25.0 to -10.0 
%   
Engine oil dilution (when part load learning value is 
normal   display fields 2 and 4) 
- Change engine oil, or carry out extensive 
road test and check again 
  
 
Fuel pressure too high- Check fuel pressure regulator   page 24
-
111
 
  
 
Fuel injector leaking- Check fuel injectors   page 24
-102
  
 
Oxygen Sensor (O2S) heater malfunction- Check O2S heater   page 24
-34
O2S control 
learning value:  
10.0 to 25.0 %   
Intake air leaks ("false air") or exhaust manifold leaks 
(when partial load learning value is normal   display 
fields 2 and 4) 
- Check intake air system for leaks   page 24
-126
 
- Check exhaust system for leaks   Repair 
Manual, 2.8 Liter V6 5V General, Engine, 
Repair Group 26 
  
 
Fuel pressure too low- Check fuel pressure regulator   page 24
-
111
 
  
 
Oxygen Sensor (O2S) heater malfunction- Check O2S heater   page 24
-34
Pa
ge 36 of 166 Motronic Multi
port Fuel In
jection 
(MFI
) and i
gnition s
ystem
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.1 
Page 44 of 166

24-34
      
Oxygen Sensor (O2S) heater before 
TWC, checking
 
     
Notes:  
     
Connector for Oxygen Sensor (O2S) heater -
Z19- (bank 1, sensor 1): 4-pin, black. 
     Connector for Oxygen Sensor (O2S) 2 heater -
Z28- (Bank 2, sensor 1): 4-pin, black. 
     Component locations   page 24
-1 .
     
Required special tools and test equipment  
     
VAG1551 or VAG1552 Scan Tool (ST) with 
VAG1551/3 adapter cable 
     VAG1598/22 test box 
     Multimeter US1119 (Fluke 83 or equivalent) 
     VW1594 connector test kit 
     Wiring diagram 
     
Test requirements  
Pa
ge 44 of 166 Motronic Multi
port Fuel In
jection 
(MFI
) and i
gnition s
ystem
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.1