catalytic converter AUDI A8 2000 D2 / 1.G ATQ Engine Oxygen Sensor Control Checking
[x] Cancel search | Manufacturer: AUDI, Model Year: 2000, Model line: A8, Model: AUDI A8 2000 D2 / 1.GPages: 63, PDF Size: 0.31 MB
Page 3 of 63
24-78
Oxygen sensors and oxygen sensor
control before catalytic converter,
checking
Special Tools and Equipment
VAG1526A
VAG1594A
VAG1598/31
VAS5051 with VAG5051/1
- or
VAG1551 with VAG1551/3B
Pa
ge 3 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 8 of 63
24-82
Significance of 3 digit indication of display group 030 X
X
X
Display fields 1 to 4
X Oxygen sensor control
0= not active
1 = active
X Operational readiness of oxygen sensor
0= not active
1 = active
X Condition of oxygen sensor heating
0= not active
1 = active
Notes:
The oxygen sensor control of the oxygen sensors behind catalytic converter (B1-S2 and B2-S2) are not active at certain
operation points without engine load, that means that the third position of the oxygen sensor controls behind catalytic
converter can fluctuate between 0 and 1.
The first position of the 3 digit indication (heating) fluctuates between 0 and 1 at certain operation points.
Pa
ge 8 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 10 of 63
24-84
1 2 3 4
Display group 033: Oxygen sensor control before catalytic converter
Display
xx.x % x.xxx volts
xx.x % x.xxx V
Indicated
Oxygen sensor control
Bank1 Oxygen sensor voltage
bank 1 Oxygen sensor control
Bank2 Oxygen sensor voltage
bank 2
Functional
range -25.0 to 25.0 % 0.100 to 1.000 V
-25.0 to 25.0 % 0.100 to 1.000 V
Specified
value Value must fluctuate by
at least 2 % in the range
10.0 to 10.0 % Value must fluctuate
approx. 0.3 V in the
range 0.100 to 1.000
volts Value must fluctuate by
at least 2 % in the range
10.0 to 10.0 % Value must fluctuate
approx. 0.3 V in the
range 0.100 to 1.000
volts
Notes
If specified value is not
obtained Page 24
-85
If specified value is not
obtained Page 24
-85
Pa
ge 10 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 12 of 63
24-86
- Press -C- button.
- Press buttons -0-, -3- and -2- to select "display
group number 032" and press -Q- button to
confirm input. System in Basic Setting 32
1
2
3
4
When indicated on display:
- Check oxygen sensor control in display fields 1 to 4:
Display fields
1 2 3 4
Display group 032: Oxygen sensor adaptation values before catalytic converter
Display
xx.x %
xx.x %
xx.x %
xx.x %
Indicated
Oxygen sensor
adaptation value
Bank 1 at idle
(additive) Oxygen sensor adaptation
value bank 1 at partial
throttle
(multiple) Oxygen sensor
adaptation value
Bank 2 at idle
(additive) Oxygen sensor adaptation
value bank 2 at partial
throttle
(multiple)
Functional
range -25.0 to 25.0 %
-25.0 to 25.0 %
-25.0 to 25.0 %
-25.0 to 25.0 %
Specified
value -10.0 to 10.0 %
can fluctuate
slightly -10.0 to 10.0 %
can fluctuate slightly -10.0 to 10.0 %
can fluctuate
slightly -10.0 to 10.0 %
can fluctuate slightly
Notes
If specified value is not obtained Page 24
-87
Pa
ge 12 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 20 of 63
24-93
Oxygen sensor aging (oxygen sensor
before catalytic converter), checking
Special Tools and Equipment
VAG1788/10 RPM adjuster
Test requirement:
VAS5051 with VAG5051/1
orVAG1551 with VAG1551/3BCoolant temperature at least 80 C Display group 4, display field 3
Pa
ge 20 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 22 of 63
24-95
Display fields
1 2 3 4
Display group 034: Oxygen sensor aging diagnostic, oxygen sensor before catalytic converter (bank 1)
Display xxxx/min
xxx C
x.x s
---
Indicated Engine speed
(RPM) Exhaust
temperature Period duration
Oxygen sensor before
Catalytic converter Diagnostic condition
Functional
range 630 to 6800
70 to 850 C
0 to 3.0 s
Test OFF
Test ON
B1-S2 OK
B1-S2 not OK
Specified
value 1000 to 2400
RPM above 380 C 0.1 to 1.8 s B1-S2 OK
Notes
If the specified value is not reached, replace oxygen sensor 1
before catalytic converter (bank 1)
Note for display field 2:
Calculated value from engine speed and engine load.
Note for display fields 3 and 4:
Period duration is the time between two oxygen sensor voltage jumps (e.g. rich - lean - rich) and is therefore a measurement
of the aging condition of the oxygen sensor. If the specified time is exceeded, display field 4 will indicate = B1-S1 not OK.
Pa
ge 22 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 24 of 63
24-96
- Press buttons -0-, -3- and -5- to select "display
group number 035" and press -Q- button to
confirm input. System in Basic Setting 35
1
2
3
4
When indicated on display:
Note:
The test in display group 035 is activated simultaneously with the test in
display group 034 Therefore the test result is indicated immediately after
display group 035 is selected. - Check specified value in display field 4.
Display fields
1 2 3 4
Display group 035: Oxygen sensor aging diagnostic, oxygen sensor before catalytic converter (bank 2)
Display xxxx/min
xxx C
x.x s
---
Indicated Engine speed
(RPM) Exhaust
temperature Period duration
Oxygen sensor before
Catalytic converter Diagnostic condition
Functional
range 630 to 6800
70 to 850 C
0 to 3.0 s
B1-S2 OK
B1-S2 not OK
Specified
value 1000 to 2400
RPM above 380 C 0.1 to 1.8 s B1-S2 OK
Notes
If the specified value is not reached, replace oxygen sensor 2
Pa
ge 24 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 25 of 63
before catalytic converter (bank 1)
Pa
ge 25 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 26 of 63
24-97
Oxygen sensor and oxygen sensor control
behind catalytic converter, checking
Special Tools and Equipment
VAG1526A
VAG1594A
VAG1598/31
VAG1788/10 RPM adjuster
VAS5051 with VAG5051/1
- or
VAG1551 with VAG1551/3B
Pa
ge 26 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 27 of 63
24-98
Notes:
The oxygen sensor control behind catalytic
converter overrules the oxygen sensor control
before catalytic converter. It serves as a
corrective control.
Test requirements:
Test sequence
It corrects slight changes in the mixture (i.e. enrichment) via the
oxygen sensor before catalytic converter by holding oxygen sensor
control before catalytic converter at its higher or lower point for a
specific time (dwell time). If this time is in the positive range (i.e. 50
ms), mixture is shifted in the -enrich- direction. If it is in the negative
range (i.e.--50 ms), mixture is shifted in the -lean- direction. Road test performed and DTC memory erased. Coolant temperature at least 80 C Display group 4, display field 3
- Connect VAS5051 tester or VAG1551 scan tool and select the control
module for engine electronics using "address word" 01 Page 01
-9 .
Engine must run at idle for this.
Pa
ge 27 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3