engine AUDI A8 2001 D2 / 1.G 01V Transmission TCM Code Workshop Manual

01-181
Explanation of display:

8D0927156BT: Part number
AG5 01V: Automatic Transmission, 5-speed
01V
2,8l 5V: Engine type
USA: Market, USA and Canada
1416: 14 = software version, 16 = data
version
Coding 00002: Coding (see Coding tables
page 01
-184
)

WSC 00000: Factory identification of
V.A.G1551, with the last coding that was
performed

-
Press button.
TCM identification can only be printed out when
printer is switched on. Rapid data transfer
HELP
Select function XX

Indicated on display
Pa
ge 3 of 9 Transmission Control Module
(TCM
), codin
g (scan tool function 07
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.11

Note:
Read Transmission Control Module (TCM) identification to determine
which transmission/engine combination is present in this case, see
explanation above. Then use coding table to determine whether the
appropriate code was entered.
- Press buttons -0- and -7-. This selects "Coding Control Module",
function 07.
Pa
ge 4 of 9 Transmission Control Module
(TCM
), codin
g (scan tool function 07
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.11

01-182

Note:
Coding can only be performed with ignition on
and selector lever in position "P" or "N".
Accelerator pedal must be in idle position.
Vehicle must be stationary and engine must not
be started. Rapid data transfer
Q
07 Code control module

Indicated on display
- Press -Q- button to confirm input.
Code control module
HELP
Input code number XXXXX

Indicated on display
Note:
Find control module identification in coding tables starting on page 01
-
184
and enter it into tester. The Dynamic Shifting Program (DSP) should
remain on at all times if possible.
Note:
DTC memory in the control module is automatically erased following
coding. - Enter code
- Press -Q- button to confirm input.
-
Press button.
Pa
ge 5 of 9 Transmission Control Module
(TCM
), codin
g (scan tool function 07
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.11

01-184
Coding tables

For vehicles without E-gas
Code
Transm.
Code Engine
Dynamic Shift
Program (DSP) Market
00000 DDT
DKB
DRD
DRN
DTV All valid engine/transmission combinations without E-gas
This information is in the following repair manuals:
Repair Manual, 5 Spd. Automatic Transmission 01V,
Repair Group 00, engine codes, engine/transmission allocation, ratios, equipment

DSP active Rest of world and
USA FWD and
Quattro
Pa
ge 8 of 9 Transmission Control Module
(TCM
), codin
g (scan tool function 07
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.11

01-185
For vehicles with E-gas Code
Engine
Dynamic Shift
Program (DSP) Market
00000 Not permitted code

00001 All valid engine/transmission combinations with E-gas DSP active Rest of world
Quattro
00002 This information is in the following repair manuals:
DSP active USA Quattro
00003 Repair Manual, 5 Spd. Automatic Transmission 01V, Repair Group 00,
engine codes, engine/transmission allocation, ratios, equipment

DSP active Rest of world
FWD
00004
DSP active USA FWD
Pa
ge 9 of 9 Transmission Control Module
(TCM
), codin
g (scan tool function 07
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.11