AUDI A8 2004 D3 / 2.G RNS_E Navigation System Manual

Navigation (NAV) 146
–Press the button
page 18, to leave the map
side menu.When you change the map orientation with the side menu active,
this map orientation remains only for the time the side menu is
active. After the map side menu is deactivated, the orientation
entered in Setup becomes active again
page 153.
When you make the selection North, the map is oriented to the
North
page 145, fig.153. The vehicle always remains in the center
of the display.
When you make the selection Drive, the vehicle symbol is oriented
pointing upward. The map rotates around the vehicle.
An active map side menu is deactivated again by pressing the
button
page 144.
Zoom mapFig. 154 Navigation: Adjusting zoom with inactive side menu
Fig. 155 Navigation: Adjusting zoom in active side menu
RETURN
RETURN

Navigation (NAV)147
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Changing scale with inactive side menu:
–Press the Map control button in the navigation menu.
– Rotate the control knob counterclockwise to zoom into
the map (smaller scale, display of details), or
– Rotate the control knob clockwise, to zoom out of the
map (larger scale, more overview). You are shown the
scale
page 146, fig.154 in the side menu.
Changing scale with inactive side menu:
–Press the Map control button in the navigation menu.
– Press the control knob to switch to the side menu.
– Rotate the control knob to the second menu item.
– Press the control knob to activate the map menu item
Zoom (white highlight)
page 146, fig.155.
– Rotate the control knob counterclockwise to zoom into
the map (smaller scale, display of details), or
– Rotate the control knob clockwise, to zoom out of the
map (larger scale, more overview). You are shown the
scale
page 146, fig.155 in the side menu.
–Press the button
page 18, to leave the map
side menu.The scale can be set from 50 m to 600 km.
When you change the scale with the side menu active, this change
in scale remains only for the time the side menu is active.By pressing the button once, you leave Zoom mode and
you can use other map menu items. Pressing the button
again deactivates the active side menu.
The scales recommended for driving are:


on freeways 3.5 km


on secondary roads 750 m


in cities 200 mTips
If you have activated automatic intersection zoom
page 159, the
map display automatically changes the scale to intersections or
turn points.
A1
A
A
RETURN
RETURN
RETURN

Navigation (NAV) 148Map position menuFig. 156 Navigation: Map position
Fig. 157 Navigation: Map position menu
–Press the Map control button in the navigation menu.
– Press the control knob to switch to the side menu.
– Rotate the control knob to the third menu item

fig.156.
– Press the control knob.
– Select Detail info, Set as destination, Set as stopover or
Save to directory.You can set the point marked at the time by the crosshairs as a desti-
nation or stopover, or save it to the directory. If additional detailed
information is available for the selected point on the map, you can
display it using the Detail info function.
You can also specify a new point on the map by moving the
crosshairs
page 149. This new point can then be Set as
destination, Set as stopover or you can Save in directory.
You can use the Set as stopover f u n c t i o n i f y o u h a v e e n t e r e d “ R o u t e
with stopovers” page 139.

Navigation (NAV)149
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Move map
A new destination or stopover can be set using the
map by moving the crosshairs horizontally and verti-
cally.Fig. 158 Navigation: Moving the crosshairs horizontallyFig. 159 Navigation: Moving the crosshairs vertically
–Press the Map control button in the navigation menu.
– Press the control knob to switch to the side menu.
– Rotate the control knob to the fourth menu item.
– Press the control knob, the horizontal line in the
crosshairs is highlighted in white
fig.158.
– Rotate the control knob to the desired point.
– Press the control knob, the ver tical line in the crosshairs
is highlighted in white
fig.159.
– By pressing the control knob you can switch back and
forth between horizontal and vertical movement.If the crosshairs remain in a new position, detailed information
(street or city name) is displayed for the current position .

Navigation (NAV) 150By pressing the button once, you leave the crosshairs
setting and you can use other map menu items via the active side
menu. Pressing the button again deactivates the side
menu.Nav-Info control buttonInformation dataFig. 160 Navigation: Display for destination Fig. 161 Navigation: Geographic information (latitude, longitude)
–Press the Nav-Info control button in the navigation menu.
You are shown the final destination or next stopover with
address, estimated time of arrival and distance

fig.160.
– Rotate the control knob to the left. The data for the next
stopovers or the destination are displayed.
– Rotate the control knob to the right. The data for your
current location with its geographical data and the
number of receivable satellites is displayed
fig.161.Your destination will be displayed listing the following information:

Destination


Stopovers


Estimated time of arrival
RETURN
RETURN

Navigation (NAV)151
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP


Distance to destination


Location of your vehicle


Geographic location of your vehicle (latitude, longitude)


Receivable satellites
The last navigation announcement will also be repeated.
Setup NavigationOpening and closing SetupFig. 162 Setup Navigation: main menu (page one)Fig. 163 Setup Navigation: main menu (page two)
– In a navigation menu, press the
page 16 func-
t i o n b u tt o n , t o o p e n t h e m ai n S e t up m e n u fo r t h e n a v i g a -
tion function
fig.162.
– Press the button again to close the main Setup
menu again.The following settings are possible in Setup Navigation:

Map scheme
page 152


Orientation
page 153


Map type
page 154


Map contents
page 155


Voice information
page 156


Delete previous destinations
page 156


Turn list
page 156


Highway info
page 157
SETUP
SETUP

Navigation (NAV) 152

Intersection map
page 158


Auto intersection zoom
page 159


Compass
page 160


Version information
page 160


Demo mode
page 161


Set position/direction
page 161
The sound and tuning settings and the brightness of the display can
be entered using the control buttons
page 169.
Tips
We recommend that you enter these settings when the vehicle is
stationary. Please note
page 9.
Map scheme
The map display can be changed according to driving
conditions (day/night).Fig. 164 Setup Navigation: Night map– Press the function button
page 16 in the navi-
gation menu.
– Select Map scheme.
– Select day, night or auto.day
Th e m a p d i s p l a y c o n t a i n s a ll to p o g ra p h i c a l d e t a i l s . The b a ckg ro u n d
is shown light. This makes map features easy to recognize. The
daytime view is optimized for ambient light
page 146, fig.154.
SETUP

Navigation (NAV)153
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP night
The map display contains all topographical details. The background
is shown dark
page 152, fig.164. This provides a glare-free view
o f t h e m a p . T h e s t r e e t n a m e s a n d t h e i r l a y o u t , p l a c e n a m e s a n d m a p
contents are in contrasting light colors
auto
The map scheme changes automatically from day to night display
when the low-beam lights are turned on.
Map orientationFig. 165 Setup Navigation: Map orientation North– Press the function button
page 16 in the navi-
gation menu.
–Select Orientation.– Select north, dir. of travel or auto.
north
The map display is always oriented north, the directional arrow on
the vehicle symbol rotates accordingly
fig.165.
dir. of travel
The vehicle symbol points to the top. The map rotates accordingly
when vehicle direction changes.
auto
The map is oriented automatically depending on the selected scale.
Less than 1.5 miles oriented to dir. of travel and greater than 1.5
miles oriented to north.
SETUP

Navigation (NAV) 154Map type
Four different types of maps can be selected.Fig. 166 Setup Navigation: Map type overview– Press the function button
page 16 in the navi-
gation menu.
– Select the desired map display under Map type

page 151, fig.162.When you select Destination, Location or Overview, the map is
shown in two dimensions. If you select Location 3D, the map is
shown in three dimensions.
The following settings are possible:Destination
The map display is oriented to the destination, meaning that the
map always shows the current single destination or final destina-
tion for a current route plan. The destination is marked with a desti-
nation flag.
W h e n y o u s e l e c t t h i s t y p e o f m a p , t h e North
page 153 orientation
is set automatically to make it easier to orient yourself.
Current position
The current vehicle location is displayed. The orientation of the map
matches the settings in Setup for navigation page 153.
Overview
When you select this type of map, the entire remaining route is
shown automatically in the best scale
fig.166. To make the map
display easier to read, it is automatically oriented to North
page 153.
Position 3D
The current vehicle location is displayed in a perspective view.
W h e n y o u s e l e c t t h i s t y p e o f m a p , t h e Tra v e l
page 153 orientation
is set automatically to make the map display easier to read.
SETUP

Navigation (NAV)155
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Map content
In addition to the information that is displayed auto-
matically, the map can also display other additional
information.Fig. 167 Setup Navigation: Selection from the map contents listTurning on filter options
– Press the function button
page 16 in the navi-
gation menu.
–Select Map content.
– Select the additional information to be displayed by
rotating and pressing the control knob. A check mark


is shown after the selected information
fig.167, or– Select the filter All categories a n d p re s s t h e co n t ro l k n o b
so that a check mark

appears after All categories. At
the same time, a check mark

will appear after each
filter option.
Turning off individual filter options
– Press the function button
page 16 in the navi-
gation menu.
– Select Map content.
–Under Map content select the individual categories that
should no longer be active and press the control knob.
The check mark

a ft e r t h e co rre s po n di n g c a t e g o r y i s n o
longer displayed.
Turning off all filters
–Press the function button
page 16 in the Navi-
gation menu.
– Select Map content.
–First select the filter All categories and press the control
k n o b so t h a t a ch e ck m a r k

appears after All categories.
At the same time, a check mark

will appear after each
filter option.
– If you press the control knob again, the check marks


after all the filter options disappear.
In addition to the information that is displayed automatically, the
map can also display a number of other pieces of information.
SETUP
SETUPSETUP