Entry AUDI A8 2007 D3 / 2.G RNS_E Navigation System Manual

Overview 14Entering PINFig. 6 Speller display: Entering PIN– Switch the ignition on.
– Switch the Navigation System on if it is not switched on
automatically
page 11.
– Enter the PIN using the speller
fig.6.
– Confirm your entry with OK. The electronic lock is
cancelled.Yo u h a v e two attempts to enter the correct PIN. The number of
attempts is shown in the display. If you enter the incorrect PIN twice
in succession, the message System is locked appears in the display.Unlocking the system (unlocking procedure)
Before you can enter the PIN again, the electronic lock must be
cancelled. This happens automatically w h e n t h e N a v i g a t i o n S y s t e m
has been switched on for about 60 minutes. If you do not insert the
ignition key into the lock, the Navigation System switches off auto-
matically after 30 minutes. When the Navigation System switches
off automatically or is switched off, the unlocking process is
cancelled and has to be started over.
When the unlocking process is complete, you have two more
attempts to enter the correct PIN. If you enter the incorrect PIN
again twice in succession, the procedure must be repeated.
Tips
If you lose your PIN, contact an Audi dealership or authorized
facility.

General system operation17
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Control knob
Yo u c a n m a k e a s e l e c t i o n i n t h e D i s p l a y b y t u r n i n g a n d
pressing the control knob.Rotation function
– Rotate the control knob
fig.9 to select a menu item in
the Display.
– Rotate the control knob clockwise or counter-clockwise
to move the cursor up or down.
Pressing function
– Press the control knob
fig.9 to confirm the selection
or entry.If an arrow
page 29, fig.23 is visible in the lower or upper
Display corner, additional menu items can be called up by
continuing to rotate the knob
page 29.
Control buttons
The control buttons are logically assigned to the
corners of the screen.
Fig. 9 Navigation
System: Control knob
A
-8 ;
%-
)2
 $
/,-8 ;; %-
)2
 -
 
. /, 
/, 2/  

.

 .
8

Display 30Operating the spellerOverviewFig. 25 Display: Number entry in the speller, e.g. entering special destination
using telephone numberFig. 26 Display: Letter entry in the speller, e.g. Navigation destination entry
I f r e q u i r e d b y t h e s y s t e m , t h e s p e l l e r w i l l a u t o m a t i c a l l y a p p e a r i n t h e
display. Then the system offers, independent of operating mode,
either the option of entering numbers
fig.25 or letters
fig.26.
If necessary, you can manually change from numbers to letters
or from letters to numbers .
The illustrations
fig.25 and designated
fig.26 symbols with
corresponding actions are listed in the following table.
A6
A11

Display31
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Legend
Symbol/
Description
Action
Selection arrow
The selected element has a
white background and is shown
larger in the entry ring.
DEL
The symbol to the left of the
cursor with the white fill is
deleted.


Cursor movement in entry field
forward/back.


Switch between caps/no caps
OK
Confirms an entry
A..Z
Switches from number to letter
entry.Entry cursorEntry fieldLarge image of the selected
character/function.
LIST
Selecting a suggestion from the
list.
0..9
Switches from letter to number
entry.
A1AA AA4A9A:AA A;;
Space

Reference to list elements
which match the current entries
in the entry field, showing num-
ber of list elementsSorted list of entries
Legend
Symbol/
Description
Action
A12A13A;

Display 32Making entries with the spellerFig. 27 Display: Entering letters in the speller
Fig. 28 Display: Entering numbers in the speller
Entering digits, letters and characters
– Select the desired letters, numbers or characters in the
speller display using the selector arrow by rotating
the control knob.
– To confirm the entry, press the control knob after each
selection of a letter, number or character.
– Select OK to close out the entry.
Deleting numbers, letters and characters
– With the selection arrow, select DEL by rotating the
control knob.
– Press the control knob, and the last entry in the entry
field will be deleted.In some cases, such as in navigation, the selection of letters is
limited by logical exclusion.
For e xample, if you have entered part of a city in the speller display
and you already recognize the desired city in the speller display list,
you can shift directly to the city list by keeping pressure on the
control knob.
A1
A
A

NAME (directory)99
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Tips


If you press the button
page 16 wi t h i n t h e N a me f un c -
tion, you can program sound and tuning settings using the control
buttons and adjust the brightness for the display.


If you have not inserted a navigation DVD into the Navigation
DVD drive, you cannot use the Directory function.
Main directory menuGeneral
Starting from the main directory menu, directory
entries can be administered.Fig. 101 Display: Main directory menu
Entries in the directory are filed as directory cards. Each directory
card contains data fields to store data on the person, on their
address and for communication with this person. These data can
also be used for Navigation
page 136.
You can store two navigation destinations* for one directory entry,
one navigation destination* for the “business” category, and one
navigation destination* for the “private” category
page 103. You
can open these stored navigation destinations in the Navigation
m e n u u s i n g t h e c o n t r o l b u t t o n w i t h t h e Memory f u n c t i o n ( l o a d f r o m
directory)
page 136.
Navigation destinations which you set in the directory as a top desti-
nation
page 133 are displayed in the main navigation menu
under the function “Start route guidance”.
Using the button (directory), you can call up all entries
without and with stored destination. Via the navigation menu Load
from directory
page 136, you can call up all entries with stored
navigation destination.
SETUP
NAME

NAME (directory) 100Generating new entries in the directoryFig. 102 Directory: Enter name for a new entry
Fig. 103 Directory: Name entered, remaining data fields can be completed
– Press the function button
page 16 if another
menu is currently being displayed.
– Select New entry.
– Select Last name
fig.102 and enter a name using the
speller
page 30.
– Select OK in the speller to confirm your entry.
– Select additional data fields to enter the desired data

fig.103.F i r s t , a n a m e h a s t o b e e n t e r e d . A l l o t h e r d a t a f i e l d s a r e “ g r e y e d o u t ”
and cannot be selected
fig.102. After you have entered a name,
you can enter the remaining data.
By selecting a data field, a speller is automatically activated
page 30 which allows letters and numerals to be entered.
The entires in the directory are saved automatically.
W h e n y o u h a v e c r e a t e d a d i r e c t o r y c a r d a n d y o u p r e s s t h e
button, you can start the next entry.
NAME
RETURN

NAME (directory)101
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Searching directory entry
Directory entries are located by last name.Fig. 104 Directory: Searching directory entry– Press the function button
page 16 if another
menu is currently being displayed.
–Select Find entry
page 99, fig.101.
– Enter the name you are looking for
page 30 over the
speller (last name), or
–Select LIST in the speller and select the entry from the
list. The directory card with all the stored data is
displayed.The entries found are displayed in the list. They can also be edited
subsequently
page 101.It is not absolutely necessary to enter a name in full to find it, but
this can reduce the size of the entry selection provided.
Tips
You can also select a stored entry through the Show list function page 102.Editing a directory entryFig. 105 Directory: Edit stored entry– Press the function button
page 16 if another
menu is currently being displayed.
– Select Find entry or Show list
page 99, fig.101.
NAME
NAME

NAME (directory) 102
– Search and select the entry that is to be changed

page 101, fig.105 and make your changes.Selecting a text field automatically activates a speller which allows
letters and numerals to be entered.Viewing entriesFig. 106 Directory: Show list– Press the function button
page 16 if another
menu is currently being displayed.
– Select Show list
page 101, fig.104. All entries for the
directory are listed.
You can select individual entries from this list to recall or to change
the stored data (e.g. navigation destination)
page 101.
Deleting individual directory entriesFig. 107 Directory: deleting an individual entry– Press the function button
page 16 if another
menu is currently being displayed.
– Select Find entry or Show list
page 99, fig.101.
– Select the entry to be deleted from the directory

page 101, fig.105.
– Select Delete this entry.
NAME
NAME

NAME (directory)103
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
–Confirm Are you sure you want to delete this entry? w ith
Ye s. The selected directory entry is deleted.Deleting all directory entriesFig. 108 Directory: Delete directory– Press the function button
page 16 if another
menu is currently being displayed.
–Select Delete directory
fig.108.
–Confirm Are you sure you want to delete all entries from
the directory? with Ye s. All directories entries are
deleted.
Setting directory navigation destinationFig. 109 Directory: Select category
Fig. 110 Directory: Enter navigation destination for an entry
NAME