AUDI A8 2010 D3 / 2.G RNS_E Navigation System Manual

CD/SD87
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
– By rotating and pressing the control knob, select NAME
(“Details”) to open more detailed information about the
current track
page 86, fig.89.If information about the current track, performer, album, year of
issue, specific comments and the category has been stored in the
MP3 file, you can bring up this information using NAME (“Details”).
Tips
Because there are different methods of generating MP3 files, it is
possible that MP3 files cannot be played or information cannot be
read. You can find additional hints starting on
page 37.
Scan MP3 track (SCAN)Fig. 90 MP3: Scanning tracks on a MP3
–Press the MP3 ctrl control button in the MP3 menu.
– By rotating and pressing the control knob, select SCAN

fig.90.Pressing the control knob activates automatic track scan. Each track
on the MP3 data carrier will be played for a few seconds.
When the button is pressed again, the scanning stops and the title
currently being played will continue to play.
Tips
Because there are different methods of generating MP3 files, it is
possible that MP3 files cannot be played or information cannot be
read. You can find additional hints starting on
page 37.

CD/SD 88Setup MP3Opening and closing SetupFig. 91 Setup MP3: main menu– In an MP3 menu, press the button to open the
main Setup menu for the MP3 function
page 82,
fig.83.
– Press the button again to close the main Setup
menu again.The following settings are possible in Setup MP3:

Repeat options
page 88


With subdirectories
page 89


Tr a c k d i s p l a y
page 90


Categ. display
page 90
The sound and tuning settings and the brightness of the display can
be entered using the control buttons
page 169.
Tips
We recommend that you enter these settings when the vehicle is
stationary. In this way, you can be sure that you are not unneces-
sarily distracted from traffic when performing the procedures that
follow. Please note
page 9, “Notes on Traffic Safety”.
Repeating MP3Fig. 92 Setup MP3: Repeating MP3 data carrier– Press the function button
page 16 in the MP3
menu.
SETUP
SETUP
SETUP

CD/SD 88Setup MP3Opening and closing SetupFig. 91 Setup MP3: main menu– In an MP3 menu, press the button to open the
main Setup menu for the MP3 function
page 82,
fig.83.
– Press the button again to close the main Setup
menu again.The following settings are possible in Setup MP3:

Repeat options
page 88


With subdirectories
page 89


Tr a c k d i s p l a y
page 90


Categ. display
page 90
The sound and tuning settings and the brightness of the display can
be entered using the control buttons
page 169.
Tips
We recommend that you enter these settings when the vehicle is
stationary. In this way, you can be sure that you are not unneces-
sarily distracted from traffic when performing the procedures that
follow. Please note
page 9, “Notes on Traffic Safety”.
Repeating MP3Fig. 92 Setup MP3: Repeating MP3 data carrier– Press the function button
page 16 in the MP3
menu.
SETUP
SETUP
SETUP

CD/SD89
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
–Select Repeat.
–Select Off, Playlist/Dir., All playlists or Tr a c k
page 88,
fig.92.The tracks from an available MP3 data carrier can be repeated.

Function Off: The Repeat function is switched off.


Function Playlist/Dir.: The MP3 tracks from the current Playliste
or of the current Directory are repeated.


Function All playlists: The MP3 tracks from all available Playlists
or of all Directories are repeated.


Function Tra c k: The MP3 track currently selected is repeated.Tips
The Repeat options can be combined with the Repeat and Random
functions. You can find more information in the description of the
Random function
page 86.
SubdirectoriesFig. 93 Setup MP3: Subdirectories activated– Press the fun ction button
page 16 in the MP3
menu.
– Select Repeat
page 88, fig.92.
– Select Playlist/Dir.
– Select With subdirectories an d p re s s t h e co n t ro l k n o b s o
that a check mark

is displayed behind this function

fig.93.
Th e fu nc t i o n With subdirectories is available for the Repeat
Playlist/Dir. function. In this way, all subdirectories in a directory are
played as well.
SETUP

CD/SD 90Tr a c k d i s p l a yFig. 94 Setup MP3: Select track display– Press the function button
page 16 in the MP3
menu.
– Select Tr a c k d i s p l a y.
– Select Tr a c k n a m e or File name
fig.94.Tr a c k n a m e
Information about the tracks (e.g. artist, album, etc.) can be read
from a previously stored ID3 tag.
The different information has to be stored first in the ID3 tag, other-
wise no information is available.
If an MP3 data carrier has been inserted and not played, the data
fro m the ID3 tag are read in in the background. If you s ta r t p layback of an MP3 data carrier immediately, the ID3 tag data are displayed
for the track being played.
I f t h e r e a r e n o I D 3 t a g s , o r i f t h e y h a v e n o t b e e n r e a d , n o i n f o r m a t i o n
about the tracks is displayed.
File name
No information about the tracks is displayed.
Category display
If the display “Track name” was selected, the category
display can be used.Fig. 95 Setup MP3: Category display switched on– Press the function button
page 16 in the MP3
menu.
SETUP
SETUP

CD/SD91
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
–Select Tr a c k d i s p l a y
page 90, fig.94.
–Select Tr a c k n a m e.
–Select Categ. display on
page 90, fig.95.Information about the category of an MP3 track can be read from a
previously stored ID3 tag. In order for this function to be available,
Tr a c k n a m e must be selected
page 90.

Adjusting sound settings 92Adjusting sound settingsSetting basic sound characteristicsFig. 96 Sound: Setting the balance (example radio menu)Fig. 97 Sound: Balance adjustment (example radio menu)
– Press the control button for the Sound function from an
audio or Setup menu.
– Select the desired sound setting (e.g. Balance)
fig.96
with the control knob.
– R o t a t e t h e s p e c i f i c c o n t r o l k n o b i n t h e s o u n d a d j u s t m e n t
menu (e.g. Balance)
fig.97 to set the sound character-
istic to your liking.
– B y p r e s s i n g t h e c o n t r o l k n o b o r t h e b u t t o n , t h e
setting is imported and you leave the settings menu.The Display
fig.97 shows the degree of adjustment.
RETURN

Adjusting sound settings93
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP The following sound adjustments are possible:


Balance (left/right volume relationship)


Fader (front/rear sound relationship)


Tr e b l e


Bass


DSP (Digital Signal Processing)
page 93


Volume settings (Navigation info)
page 94
The sound setting for the Tre b l e and Bass (lows) can be adjusted
separately for radio, CD and MP3 operation.
The settings that you enter apply to the operating mode that is
currently active in the Navigation System. If you change the bass
setting, for example, when playing a CD, it will not affect radio or
MP3 operation.
DSP (Digital Signal Processing)Fig. 98 DSP: GALA settings– Press the control button for the Sound function from an
audio or Setup menu.
– Select DSP.
– Select GALA.
– Select one of the five levels, or
– Select off to switch the function off.Th e GALA function matches the volume to the speed to compensate
for road and wind noise.
If you set level 1, the volume is increased less as speed increases. If
you set level 5, the volume is increased more as speed increases.

Adjusting sound settings 94
TipsVehicles with a BOSE sound system in conjunction with
an AudioPilot do not have a DSP function. In this case your vehicle
is equipped with dynamic noise compensation
page 94.
Applies to vehicles: with BOSE sound system in conjunction with AudioPilotDynamic noise compensationVehicles with a BOSE sound system in conjunction with AudioPilot
are equipped with dynamic noise compensation.
Dynamic noise compensation automatically adjust music playback
so that the music is no t drowned out b y no ise . No matter what kind
of ambient noise you have in the vehicle, the music playback level
remains the same.
Dynamic noise compensation takes account of both temporary and
permanent ambient noise.
How does dynamic noise compensation work?
A microphone in the vehicle interior detects both the noise level of
the music playback and intrusive noises. The intrusive noises are
digitally analyzed and evaluated. The system simultaneously
ensures that the music playback level is increased by the frequen-
cie s affe cte d by intrusive noise so that music playback remains at a
constant level for good listening.
Tips
In the event of a malfunction in the AudioPilot system, a gong signal
sounds three times to alert you after the Navigation System is
turned on. Have the AudioPilot system inspected by a qualified
dealership.
Vo l u m e s e t t i n g sFig. 99 Display: Volume settings– Press the control button for the Sound function from an
audio or Setup menu.
– Select Vo lum e set tin g s.
– Select Navigation info.
– Rotate and press the control knob to set the desired
volume.When you adjust the volume for Navigation prompts, a test
announcement is made automatically. This test announcement is
made only if the navigation DVD is in the DVD navigation drive page 35.

Adjusting sound settings95
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Tips
If the volume is too high when the radio is turned on, it will be
reduced automatically to a level set at the factory. If the volume is
too low when the radio is turned on, it will be increased automati-
cally to a level set at the factory.