ECO mode AUDI A8 2013 Owners Manual

(!) Door handle
@
®
©
®
®
Audi side assist display
Power locking switches
Audi side assist button
Air vents with thumbwheel
Control lever for :
- Turn signal an high beam
- Audi lane assist .......... .
0 Multifunction steering wheel
with:
- Horn
- Driver's airbag
- Driver information system but-
tons . ............... .. .. .
- Audio/video, telephone, navi­
gation and voice recognition
buttons
- Shift paddles ........ .. .. .
@ Instrument cluster ......... .
® Windshield washer system
lever ..................... .
@ Starting the engine if there is a
malfunction ............. .. .
@ Buttons for:
- Start-Stop-System
- MMI display
- Elec tronic Stab ilizat ion Con-
trol (ESC) ............... .
- Emergency f lashers ....... .
@ Buttons for:
- Steering wheel adjustment
- Steering wheel heating
@ Lever for:
- Cruise control system
- Adaptive cruise control .. .. .
(8) Engine hood release ........ .
@ Data Link Connector for On
Board Diagnostics (OBD II) ....
@ Light switch and instrument il-
luminat ion ................ .
@ Buttons for:
- All-weather lights
- Night vision assistant .. .. .. .
- Rear fog lights ........... .
105
35
105
47
102
156
23
118
10
52
85
87
200
46
82
81
90
93
232
28
45,50
45
112 45
Instruments and controls 9
@ Power exterior mirror adjust-
ment .... .. .............. .
@) Rear lid switch ... . .. .. ..... .
@ Power windows ............ .
@ Memory function buttons .... .
@ MMI display
@) Indicator lights/buttons for
- PASSENGER AIR BAG OFF
- Parking system ........... .
- Rear window power sun shade
@ Glove compartment ... ..... .
@ Front passenger's airbag .... .
@ Analog clock .. .. .......... .
@ Climate controls ........... .
@ MMI controls
@ Selector lever (automatic trans-
mission) ....... ........... .
@ Center console with cupholder
@ Ele ctromechanical parking
brake .................... .
54
36
40
65
163
121 51
75
156
26
79
115
74
85
@ I S T ART ENGI NE STO PI button 83
(D Tips
-Some of the equipment or features
shown in the general illustration may be
standard equipment on your vehicle or
may be optional equipment depending
on your model. Always ask your author­
ized Audi dealer if you have a question
about your vehicle.
- Operation of the Multi Media Interface
(MMI) is described in a separate manual.

Instruments and warning/indicator lights 15
(USA models): If the warning light 1111 and
the warning light
EiJ appear together, imme­
diately contact your authorized Audi dealer or
qualified workshop to have all brake pads in­
spected
¢ page 20 .
When t he light comes on, an audible warning
signal is also given.
A WARNING
-Always observe the warnings in
¢ page 226, Engine compartment, be­
fore opening the hood and checking the
brake fluid .
- Driving with low brake fluid is a safety
hazard. Stop the car and get professional
assistance.
- USA models: Ifthe llll warning light,
the
G1 warning light and the firlilJ warn­
ing light come on together, the rear
wheels could lock up first under hard braking. Rear wheel lock-up can cause
loss of vehicle control and an accident.
Have your vehicle repaired immediately
by your authorized Audi dealer or a quali­
fied workshop. Drive slowly and avoid sudden, hard brake applications.
- Canada models: If the brake warning
light ., the
DJ warning light and the
ABS warning light
BJ come on together,
the rear wheels could lock up first under
hard braking. Rear wheel lock -up can
cause loss of vehicle control and an acci­
dent . Have your vehicle repaired immedi­
ately by your authorized Audi dealer or a
qualified workshop. Drive slowly and
avoid sudden, hard brake applications.
- If the brake warning/indicator light does
not go out after a few seconds and the
parking brake is released, or lights up
while you are driving, the fluid Level in
the brake fluid reservoir is too low. If you
believe that it is safe to do so, proceed
immediately at low speed to the nearest
authorized Audi dealer or qualified repair
facility and have the brake system in­ spected. -
Always keep in mind that after several
brake applications, you will need greater
pressure on the brake pedal to stop your
vehicle. Do not rely on strained brakes to
respond with maximum stopping power
in critical situations. You must allow for
increased braking distances. The extra
distance used up by fading brakes could
lead to an accident.
PARK/( ®) Electromechanical parking
brake
The warning/indicator light monitors the
electromechanical parking brake.
If the indicator light - (USA models)/ .
(Canada models) turns on, the parking brake
was set. If the parking brake is set when the
ignition is off, the indicator light turns off af­
ter about 20 seconds.
Th e warning/indicator light will go out when
the parking brake is released.
- (USA models) ,. (Canada models)
Caution: Vehicle parked too steep
If the indicator light blinks and the message
appears, there is not enough braking power to
ke ep the vehicle from rolling . The brakes have
overheated. The vehicle could roll away even
on a small incline .
Press brake pedal to release parking brake
To release the parking brake, press the brake
pedal and press the button
@ii or start driving
with starting assist at the same time
¢page 86 .
Please release parking brake
To release the parking brake manually , press
the brake pedal and press the button~ at the
same time. The parking brake only releases
automat ica lly if the driver's safety belt is fas­
tened .
ES Parking brake!
If the ES indicator light turns on and this
message appears, there is a parking brake
malfunction. Drive to your authorized Audi

18 Instruments and warning/indicator lights
If the indicator light turns on and the mes­
sage appears, do
not switch the ignition off
because you may not be able to switch it on
again.
Drive to your authorized Audi dealer immedi­
ately to have the malfunction corrected.
II! Engine start system fault. Please con­
tact dealer
If the indicator light turns on and the mes­
sage appears, there is a malfunction in the en­
gine start system.
Drive to your authorized Audi dealer immedi­
ately to have the malfunction corrected.
0 Air suspension
• Air suspension: system fault. Can contin­
ue slowly with max. 35 mph.
There is a malfunction that can result in re­
stricted driving stability.
Carefully drive at a maximum speed of 35
mph (60 km/h) to your authorized Audi dealer
or qualified workshop to have the malfunction
corrected.
• Air suspension: service mode. Vehicle
can only be moved with restrictions
Carefully drive to your authorized Audi dealer
or qualified workshop immediately to have
the service mode deactivated.
II Air suspension fault
There is a system malfunction that can result
in restricted driving stability or reduced
ground clearance.
Drive to your authorized Audi dealer immedi­
ately to have the malfunction corrected.
II Air suspension: vehicle too low. Ground
clearance reduced
The ground clearance is very low due to a sys­
tem malfunction . Wait until the air suspen ­
sion system has restored normal ground clear­
ance. Otherwise, conditions such as an uneven
road surface can lead to vehicle damage.
AIR/ e;, 5 f BAG -, a ety systems
The fl (USA models)/E,l(Canada models) indi­
cator light monitors the safety systems e.g.
airbags, pretensioners and illuminates for a
few seconds each time you switch the ignition
on.
If the
fl (USA models)!E,I (Canada models)
indicator light does not go out, or if it illumi­
nates while you are driving, or if it starts to
blink, then there is a malfunction somewhere
in the system.
If the light does not illuminate
when you switch the ignition on, this also means there is a malfunction.
A WARNING >=
If you have a malfunction in the safety sys-
tems, contact your authorized Audi dealer
immediately. Otherwise the safety sys­
tems may not work properly in an acci­
dent.
f'!.l f); Electronic Stabilization Control
(ESC)
This warning/indicator light monitors the
Electronic Stabilization Control.
When you switch the ignition on, the indicator
light
D.1 turns on briefly to check the function.
If the
Ip] indicator lamp blinks while driving,
the ESC or ASR (Anti-Slip Regulation) is active­
ly regulating.
If the
Ip] indicator lamp illuminates, the sys ­
tem has switched the ESC off.
If the indicator light
I turns on, the ESC was
switched to ESC sport mode with the button
[!l ¢ page 198. If this is case, you can reacti­
vate the ESC by switching the ignition off and
then on again. The warning/indicator light
should go out to show that the system is fully
functional again.
Stabilization control (ESC/ABS): Fault! See
owner's manual
111-

Instrument s and warnin g/indic ator ligh ts 19
If the indicator light DJ and the ABS indicator
light
r.t.1:1:1 (USA models) 1 11] (Canada mod­
e ls) turn on and the message appears, there is
a ma lfunction in the ABS system or e lectronic
d ifferential lock. This also interrupts the ESC.
The brakes still function with their normal power, but ABS is not active.
Drive to your authorized Aud i dea ler immedi­
ately to have the malfunction corrected.
If the battery terminals were disconnected
and re -connected, the vehicle was jump start­
ed or the battery is very weak, the ESC sensor
system goes through a learning process for
the first few yards. The warning/ind icator
light illuminates. The warn ing/ indicator l ight
goes out as soon as the learning process is
comp lete.
For more informat ion about the ESC
c::>page 198.
ABS/(@) Anti-lock braking system (ABS)
This warning/indicator light monitors the ABS
and the electronic differential lock (EDL).
The warning/indicator light
E (USA mod­
els)
Ill] (Canada mode ls) will come on for a
few seconds when the ignition is switched on.
The light will go out after an automat ic check
sequence is completed .
There i s a malfunction in the ABS when:
-The warning/ ind icator light does not illumi­
nate when you switc h the ignition on.
- The warning/indicator light does not go out after a few seconds.
- The warning/indicator light illuminates
whi le driving.
The ESC indicator light also illuminates if
there is a malfunction in the ABS. The mes­
sage
Stabilizatio n control (ESC /ABS ) Fault !
See owne r's manual
also appears in the in­
strument cluster display and a warning tone
sounds .
The brake s ystem will still respond even
without the assistance of the ABS s ystem .
See your authori zed Audi dealer as soon as po
ssible to re store full br aki ng performance.
For more information regarding the ABS
c::> page 198 .
Malfunction in the brake system
If the brake war ning l igh t c::> page 14 and the
ABS warning illum inate together th ere may be
a mal function in the ABS, and there may a lso
be a malfunction i n the brake system itself
c::> .& . The ABS will not wo rk and you will no ­
tice a change in b raking response and per ­
formance .
In the event of a malfunction in the brake
s y stem
the warning/indicator light 1111
(USA mode ls)/ . (Canada models) in the in­
strument cluster flashes
c::> page 14.
Malfunction in th e electronic diff erential
lock (EDL)
The EDL works together w ith the ABS. The
ABS warning light will come on if there is a malfunction in the EDL system¢ page 198 .
See your author ized Audi dealer as soon as
poss ible .
.&_ WARNING
- If the r.t.1:1:1 (USA mode ls)/ [IJ (Canada
models) w arning light does not go ou t,
or if it comes on whi le dr iving, t he ABS
system is not wor king properly. The vehi­
cle can then be stopped only wit h the
standard brakes (without ABS). You w ill
not have the protect ion ABS prov ides.
Contact your Audi dea ler as soon as pos­
sible.
- USA models: If the
1111 warning light,
the:
JjJ warning light and the E warn­
ing light come on together, the rear
wheels could lock up f irst under hard
brak ing. Rear wheel lock-up can ca use
loss of vehicle control and an accident.
Have your vehi cle repaired immediately
by your authorized A udi dealer or a quali ­
fied workshop . Drive slow ly and avoid
sudden, hard brake applications.
- Canada models:
If the brake warning
light ., the
D] warning light and the
ABS warning light
[I] come on together, ~

Instrument s and warning /indicator lights 25
select the time period for evaluat ing trip in­
formation yourself.
F or some veh icle functions, you can access the
t r ip information from the temporary memory
in the
line @~page23, fig. 5.
The current fuel consumpt ion can be dis­
p la yed using a bar ~
page 26, fig. 10. The
average consumption (mpg) stored in the
short-term memory is also displayed. Electri­
cal energy can be stored in the battery when
the vehicle is coast ing or driving downhill (re­
cuperation) . The bar will move toward D.
Efficiency program*
The eff ic iency program can help you to use
l ess fuel.
It evaluates driving information in
reference to fue l consumption and shows oth ­
er equipment influencing consumption as well
as shift recommendations.
q page 25. Fuel
economy messages
q page 25 provide tips
for efficient driving. The effic iency program
uses distance and consumption data from tr ip
computer
1.
To display the efficiency program, call up Ve­
hicle functions and select the menu option
Efficiency prog ram . If the data are deleted in
the efficiency program, those values are also
reset in trip computer.
(D Tips
- All stored values w ill be lost if the veh i­
cle battery is disconnected.
- Fuel consumptions (average and cur­ rent), range and speed are displayed in
metric units on Canadian models.
Other equipment
Applies to vehicles: with efficiency program
Fig. 8 Trip computer: ot her equipment
Requirement: The efficiency program must be
displayed
q page 25.
.,. Turn the thumbwheel until the other equip-
ment appears in the display .
Other equipment that is currently affecting
fuel consumption is listed in the efficiency program . The display shows up to three other
items of equipment @. The equ ipment using
the most fuel is listed first. If more than three
items using fuel are switched on, the equip­
ment that is currently using the most fuel is
displayed .
A scale ® also shows the current total con­
sump tion of all other equipment.
Fuel economy messages
App lies to vehicles: with efficiency program
Fig. 9 Disp lay : example o f a fu el econo my m essa ge
Fuel economy messages are displayed when
fuel consumption is increased by certain con­
ditions. If you follow these fuel economy mes­
sages, you can reduce your vehicle's consump­
tion of fuel. The messages appear automati-
cally and are only displayed in the efficiency
111,,

26 Instruments and warning/indicator lights
program. The fuel economy messages turn off
automatically after a certain period of time.
.,. To turn an economy message off immedi-
ately after it appears, press any button on
the multifunction steering wheel.
@ Tips
- Once you have turned a fuel economy
message off, it will only appear again af­
ter you turn the ignition on again.
- The fuel economy messages are not dis­
played in every instance, but rather in in­
tervals over a period of time.
Cylinder on demand System
Applies to vehicles: with 4.0 TFSJ engine
Fig. 10 Instrument duster: fuel consumption
To save fuel, the engine automatically turns
four cylinders on or off, depending on the
amount of power needed. This action is not
felt by the passengers.
Displaying cylinder mode
Requirement: the on-board computer is dis­
played
~ page 24.
.,. Turn the thumbwheel until the current fuel
consumption display is shown in the instru­
ment cluster.
If the green bar is displayed,
you are driving in 4-cylinder mode.
Basic requirements for 4-cylinder mode
4-cylinder drive mode is used automatically if
certain basic requirements are fulfilled. These
include:
- A low power output requirement.
- Driving in third gear or higher.
- Engine speed between 960 and 3,500 RPM. - A warm engine.
Odometer
Fig. 11 Instrument cluster Odometer and
reset button
The odometer shows you how many miles
(kilometers) you have driven. You can switch
the display from miles to kilometers and vice
versa via the MMI.
Upper odometer
The trip odometer shows the distance driven
since it was last reset. It can be used to meas­
ure short distances. The last digit indicates
1/10 of a mile (100 meters).
You can reset the trip odometer to zero by
pressing the Reset button
Efil.
Lower odometer
The lower odometer shows the total number
of miles (kilometers) driven.
Malfunction message
If there is a malfunction in the instrument
cluster,
DEF will appear in the trip odometer
display area. Contact your authorized Audi
dealer to have the problem corrected .
Time and date display
Fig. 12 Center console: analog clock

Emergency closing of the sliding/tilting
sunroof
If the sun roof detects an object in its path
when it is closing, it will open again automati­
cally. In this case, you can close the roof with
the power emergency closing function.
.. Within five seconds after the sunroof opens
automatically, pull the switch until the roof
closes.
Panoramic sunroof
Opening/closing the roof
App lies to vehicles: with panoramic sunroof
Fig. 35 Sectio n of t he front headliner : panoramic s un­
roof bu tton
Fig. 36 Rear doo r: pa noram ic sun roof button
@ Tilting the front segment of the roof
.. To tilt the sunroof completely, press the
button up br iefly to the second level~-
.. To close the sunroof completely, pull the
button
l""'I down briefly to the second level
¢ A .
.. To select a tilted position, press/pull the
button
l""'I to the first level until the desired
position is reached.
Opening and closing 43
@ Sliding the front segment of the roof
.. To open the sunroof completely, slide the
button
~ back to just before the second
level ¢
fig. 35.
.. To close the sunroof completely , slide the
button ~ forward briefly to the second lev­
el
Q & .
.. To select a partially open position, slide the
button~ forward/back to the first level un ­
til the desired position is reached .
Tilting the rear segment of the roof
The rear segment of the roof can be operated
both from the cockpit and from the rear seat.
.. To tilt the sunroof completely, press the
button ~ in the rear door briefly to the sec­
ond level ¢
fig. 36 .
.. To close the sunroof completely, pull the
button~ up briefly to the second level
QA .
.. To select a tilted position, press/pull the
button~ to the first level until the desired
posi tion is reached. Or
.. To operate the roof from the cockpit, press
the
I REAR MODE ! button¢ fig. 35. You can
now open/close the rear segment of the roof
using the button
l"-'I in the headliner. The
LED in the front of the headliner turns on
when the rear roof segment is tilted.
After the ignition is switched off, you can still
operate the panoramic sunroof for about 10 minutes. The switch is deactivated once the
driver's or front passenger's door is opened .
A WARNING
-
Be careful when closing the panoramic
sunroof- otherw ise serious injury could re­
sult! For this reason, always ta ke the igni­
tion key with you when leaving the vehicle .
(D Note
Always close your panoramic sunroof when
l eaving your vehicle . Sudden ra in can cause
damage to the interior equipment of your
vehicle, particularly the e lectronic equip­
ment.

44 Opening and closing
- Information regarding convenience
opening/closing ¢
page 33.
-The panoramic sunroof will only open at
temperatures above -4 °F (-20 °C).
- To prevent both roof segments from col ­
liding with one another, you do not need
to
- tilt the rear roof segment if the front
roof segment is already open .
- close the front roof segment if the rear roof segment is already tilted .
Opening/closing the sun shade
Applies to vehicles: with panoramic sunroof
© Front sun shade
.,. To open the sun shade completely, slide the
button
G;J back to just before the second lev­
el ¢
page 43, fig . 35 .
.,. To close the sun shade completely, slide the
button
G;J forward briefly to the second lev­
el.
.,. To select a partially open position, slide the
button
G;J to the first level until the desired
position is reached.
© Rear sun shade
.,. To open the sun shade completely, press
the button ~ in the rear door briefly to the
second level¢
page 43, fig. 36 .
.,. To close the sun shade completely, pull the
button
G;J up to the second level¢.&_ .
.,. To select a partially open position, press/
pull the button
GJ to the first level until the
desired position is reached. Or
.,. To operate the sun shade from the cockpit,
press the
I REAR MODEi button ¢ page 43,
fig. 35. You can now open/close the rear sun
shade using the button~ in the headliner.
A WARNING
-
Be careful when closing the panoramic
sunroof - otherwise serious injury could re­
sult! For this reason, always take the igni­
tion key with you when leaving the vehicle.
Roof segment/sun shade emergency
closing
Appl ies to vehicles: with pano ramic sunroof
If the roof segment or sun shade detects an
object in its path when it is closing, it will
open again automatically . In this case, you
can then close it with the power emergency
closing function .
.,. Within five seconds after the roof segment
or sun shade opens automatically, pull the
switch until it closes.

_& WARNING
High beam assist is only i ntended to assist
the driver . The driver is sti ll responsible for
cont ro lling the h eadlights and switching
the high beams on and off manually de­ pen ding on traffic, ligh ting and visibili ty
condi tions. Failure to interve ne manually
may lead to r isk o f accident . It m ay be nec­
essary to operate the high beams man ual ­
ly in the following sit uat ions, e .g .:
- For adverse wea ther conditions such as
fog, heavy rain, blowing snow or s praying
water .
- On roads where oncoming traffic may be partia lly obsc ured s uch as exp ressways .
-If there are in dividuals on the road wi th
no light ing or poor lightin g, such as cy ­
cli sts .
- In tight c urves and on steep slopes .
- In po orly lit areas.
- With stro ng re flecto rs su ch a s signs.
-If the area of t he wind shie ld nea r th e
sensor is fogg ed over, d irty, icy or cov­
ered w it h a st icker.
(D} Tips
- The high beam ass ist is active above a
speed of approx . 25 mph (40 km/h).
- If afte r activation, you r speed falls below
approx . 15 mph (24 km/h), the hig h
beams w ill automa tica lly be switched
off .
Interior lights
Front and rear interior lighting
Fig. 41 Headl iner: Front in te ri or l ights
Clear vi sion 49
Fig . 4 2 Rea r headliner: Read ing l ig ht
Press the appropriate button r::;, fig . 41:
El-Inte rior light ing on/off
~ -Door contact swi tch. The interio r ligh ting
turns o n automatically when yo u unl ock the
v e hicle, open a door or sw itch the ignition
off .
The inter ior light ing turns off s evera l seconds
after you close the doors, when you lock the
vehicle or when you switch the ignition on .
When a doo r is open, the l ight turns off after
a few minutes.
~ -Read ing lights on/off
@[I -Switching the rear read ing lights on/off
from the cockpit.
I REAR MODE i* -Sw itch ing the rea r reading
li gh ts on/off from the cockpit: press the
I REAR MODE i bu tton and then the appropriate
button ~ in the cockpit.
Ambience lighting
App lies to vehicles : wit h ambience lig hting
You can select a color profile and br ightness
for t he ambie nce lighting in various areas of
the veh icle, called zones .
Turning ambience lighting on
.. Select in the MMI: ICAR lfunction button>
Car systems control button > Vehicle set­
t ings > Interior light ing > On .
Adjusting /turning off the brightne ss
.. Select in the MMI: ICAR lfunction button>
Car systems control b utton > Vehicle set­
tings
> Inte rior lighting > Brightness .

52 Clear vision
Wiper and washer
system
Switching the windshield wipers on
Fig. 48 Wind shie ld wipe r lever
Move the windshield wiper lever to the corre­
sponding position:
@ - Windshield wipers off
(I) -Rain sensor mode. The windshield wipers
switch on once the vehicle speed exceeds ap­
proximately 2 mph (4 km/h) and it is raining.
The higher the rain sensor sensitivity is se t
(switch @to the right), the earlier the wind­
shield wipers react to moisture on the wind­
shield. You can deactivate rain sensor mode in
the MMI, which will then activate intermittent
mode. Select:
ICARI function button > Car sys­
tems
control button > Driver assist > Rain
sensor
> Off. In intermittent mode, you can
adjust the interval time using the switch @.
@-Slow wiping
@-Fast wiping
© -Single wipe. If you hold the lever in this
posi tion longer, the wipers switch from slow
wiping to fast wiping .
® - Clean the windshield . The wipers wipe
one time after several seconds of driving to remove water drople ts. You can switch this
function off by moving the lever to position ®
within 10 seconds after the afterwipe . The af­
terwipe function is reactivated the next time
you switch the ignition on.
Cleaning the headlights. The headlight wash ­
er system* only functions when the headlights
are on . If you move the lever to position ®, the headlights and the night vision system
camera* are washed in intervals.
.&_ WARNING
-
- The rain sensor is only designed to assist
and support the driver.
It remains entire­
ly the driver's responsibility to monitor
outside weather conditions and to man­
ually activate the wipers as soon as rain
or drizzle reduces visibility through the
windshield.
- The windshield must not be treated with
water-repellent materials. They can in­
crease glare under poor visibility condi­
tions such as wetness, darkness, or when
the sun is low on the horizon. In addi­
tion, they can cause the windshield wip­
ers to chatter.
- Properly functioning windshield wiper
blades are required for a clear view and
safe driving
q page 53, Replacing
windshield wiper blades.
(D Note
- In the case of frost, check whether the
windshield wiper blades are frozen to
the windshield. Switching on the wind­
shield wipers can damage the wiper
blades!
- Prior to using a car wash, the windshield
wiper system must be switched off (lever
in position @). This helps to prevent un­
intentional switching on and damage to
the windshield wiper system.
- Do not use the wipers to clear a frosted
window . Using the wipers as a conven­
ient ice scraper will destroy the wiper
blades .
(D Tips
-The windshield wipers are switched off
when the ignition is off . Activate the
windshield wipers after the ignition is
switched back on by moving the wind­
shield wiper lever to any position.
- Worn or dirty windshield wiper blades
result in streaking. This can affect the