engine AUDI A8 2014 User Guide
[x] Cancel search | Manufacturer: AUDI, Model Year: 2014, Model line: A8, Model: AUDI A8 2014Pages: 314, PDF Size: 78.47 MB
Page 19 of 314

Instruments  and  warning/indicator  lights  17 
Seek  professional  assistance  if  the  battery 
charge  leve l is too  low. 
(•)  Low battery  charge: battery  will  be 
c harged  while  driving 
If the  indicator  light turns  on  and  the  mes
sage  appears,  there may be limited  start ing 
ability. 
If th is  message  turns  off  after  a  little  wh ile, 
the  battery  charged  enough  wh ile  driving . 
If  the  message  does  not  turn  off,  have your 
author ized  Audi  dealer  or  qualified  workshop 
correct  the  malfunction. 
~ Engine  oil  pressure  malfunction 
The red  engine  oil pressure  warning symbol 
requires  immediate  service or repair . Driving 
with  a low-oil-pressure  indication  is likely  to 
inflict  severe  damage  to  the  engine. 
• Switch  off  engine  and  check oil  level 
If  the indicator  light  turns  on  and  the  mes
sage appears, the  oil pressure  is too low. 
..  Pull  off  the  road. 
..  Stop  the  vehicle . 
..  Turn  off  the  engine. 
.,.  Check the  engine  oil  level¢ page  236  . 
.. If  the  engine  oil  level is too  low,  add  engine 
o il ¢ 
page  237 . Make sure  that  the  oil  pres
sure  warning  symbol. appears  no  longer 
in  the  d isplay  before  you  start  driving again. 
.,.  If  the  engine  oil  level  is  correct  and the indi
cator  light  st ill turns  on,  turn  the  engine  off 
and  do  not  continue  driving.  Seek professio
nal  assistance. 
(D Tips 
- The  engine  oil  pressure symbol. is 
not  an indicator  for  a low  engine  oil  lev
el.  Do not  rely on  it.  Instead,  check  the 
oil  level  in  your engine  at  regular  inter· 
vals,  preferably  each  time  you  refuel, 
and  always  before  going  on a  long trip. 
- The  yellow  oil  level  warning  indication 
Ill requires oil  refill or  workshop  serv
ice  without  delay.  Do not  wait  until  the  red oil  pressure 
warning. starts  to 
flash  before  you  respond  to  the  low  oil 
level  warning 
II. By then,  your engine 
may  already  have suffered  serious dam
age. 
~"'  Engine  oil  level 
•  WARNING : Please  add oil  immediately 
If the  indicator  light  and  the  driver  message 
appear,  add  engine  o il immed iately 
¢ page  234. 
II Add oil,  max . x  qt  (l).  You  may continue 
driving 
When  the  symbol  and  the  driver  message  ap 
pear,  add  the  amount  of  oil appearing  in the 
display  at  the next opportunity ¢ 
page 234. 
@-Steering  column  lock 
•  Do not  drive  vehicle:  Steering  defective 
If the  indicator  light turns  on  and  the mes
sage appears, there is an e lectronic steering 
column  lock  malfunction.  You cannot  switch 
the  ignit ion  on . 
Do 
not tow  your  vehicle  because  it  cannot  be 
steered.  Seek  professiona l assistance  . 
!'II Steering lock: system  fault. Please  con
tact  deale r 
If the  indicator  light  turns  on  and  the mes
sage  appears,  there is an  e lectronic  stee ring 
column  lock  malfunction. 
Drive  to your  authorized  Audi  dealer  immedi
ate ly  to  have  the  malfunction  corrected . 
A WARNING 
Your vehicle  must  not  be  towed  in the 
event  of  a  malfunction  in the  elec tron ic 
steering  column lock because  it  cannot  be 
steered  due to  the  locked  steering . If it is 
towed  with  the  steering  locked,  there  is 
the  r isk  of  an  accident.  
Page 20 of 314

18  Instruments  and  warning/indicator  lights 
©-Engine  start  system 
•  Engine  start  sy stem  fault.  Please  con
tact  dealer 
If t h e  in dicator  light  turns  on and the  mes
sage appears,  do 
not sw itch  the  ignition  off 
be cause you  may not  be able to  switch  it  on 
aga in . 
D rive to  you r autho rized Aud i deale r immedi
ate ly to  hav e th e malfunction  corrected. 
11111 Engine  start  system  fault.  Please  con
tact  dealer 
If the  indicator  light  t urns on and the  mes 
sage appears,  there  is a ma lfunction  in the  en
g ine start  system. 
D rive to  yo ur autho rize d Au di dea le r  immedi
ate ly to  have t he mal function  cor rected . 
0 Air suspension 
•  Air suspension:  system  fault.  Can cont in
ue  slowly  with  max.  35  mph . 
There is a malfunctio n  that  can res ult in re
stricted  dr iving  stability. 
Ca re fully  d rive a t a maxim um  s peed o f 35 
mph  ( 60  km/h)  to  your  author ized A udi dealer 
or  qua lified  wor kshop to  have the  malfunction 
corrected. 
•  Air suspension:  service  mode.  Vehicle 
can only  be  moved  with  restrictions 
Ca re fully  drive to  your  au thori zed A udi d ealer 
or  quali fied  wor kshop  immedi ate ly to  have 
the  servi ce mode  deac tiva ted. 
l!IJ Air suspension  fault 
There is a system  ma lfunction  that  can result 
in  restr icted  dr iving  stability  or  red uced 
g ro und cleara nce. 
Drive to  yo ur authorized  Aud i dealer  immedi
ately  to  have t he malfunction  corrected . 
l!IJ Air suspension:  vehicle  too  low.  Ground 
clearance  reduced 
T he groun d clearance is very  low  due to  a sys 
tem  malfunction.  Wa it  until  the  air  suspen
s io n  system  has resto red  no rma l ground  clear
ance. Ot herwise,  cond it ions such as an uneven 
road surface  can  lead to  vehicle  damage. 
tli1!.t Safety  systems 
T he fl (U SA models)/ El(Canada models)  indi
cator  lig ht  monitors  the  safety  sys tems e .g. 
airbags , p retens ione rs and  illuminates  fo r a 
f ew  seco nds  ea ch  time  y ou  swit ch t he ign ition 
o n . 
If  th e 
I (USA mod els)/ EI (Can ada  models) 
i ndica to r li ght  does no t go  o ut,  or  if  it illum i
n at es  while  yo u are d riving,  o r if it  start s to 
blink,  the n t here is a m alf u nctio n somewhe re 
in the  sys tem . If  the  ligh t  does no t  illumina te 
whe n you  switch  the  ig nitio n  on, t his also 
means there  is a mal funct ion . 
A WARNING ....._ 
If  yo u have a ma lf u nction  in t he safety  sys
tems,  contact  you r auth orized  Audi  dea le r 
immedia tely. Othe rwise t he safety  sys
t ems  may not  work  properly  i n an  acc i
d en t. 
~ Central  indicator  light 
If th e  indicato r light . or D tur ns o n, check 
th e m essage  in  th e i nstru men t  cluster. 
F!,J [}; Electronic  Stabilization  Control 
(ESC) 
If the bl indicator  light  b links w hile d riving, 
the  ESC or  AS R (Anti-Slip  Re gulation)  is active
ly  reg ulating. 
If  the 
bl indicator  light  turns  on , th e system 
has switc hed the  ESC off . In  t his case, yo u can 
switch  the  ign ition  off  and then  on to  switch 
the  ESC o n aga in. The ind icator  lig ht  tu rns off 
whe n the  system  is functioni ng fu lly. 
If  the 
fl indicato r light  turns  on,  ESC was re-
stricted  using  the 
[!I button ¢ page 199.  ..,.  
Page 22 of 314

20  Instrum ent s  a nd  w arn in g/i ndic ato r  light s 
wheels  co uld  lock up first  under  hard 
braking.  Rear wheel  lock-up  can cause 
loss  of vehicle  control  and  an  accident. 
Have your vehicle  repaired  immediately 
by your authorized  Aud i dealer  or  a quali
fied  workshop.  Drive slowly and  avoid 
sudden,  hard  brake  applications. 
- Canada models: If the  brake warn ing 
light ., the 
DJ warning  light  and  the 
ABS warning  light 
[iJ come  on togethe r, 
the  rear  wheels  could  lock up  fi rst  under 
hard  braking.  Rear wheel  lock-up  can 
cause  loss  of vehicle  control  and  an  acci
dent.  Have your vehicle  repaired  immedi
ately  by your  authorized  Audi dealer  or  a 
qualified  workshop.  Dr ive slowly and 
avo id sudden,  hard  brake  applicat ions. 
(0) Worn  brake  pads 
EtJ Bra ke pads! 
If the  warn ing  light  illuminates,  immediately 
contact  your  authorized  Audi dealer  or  quali
f ied workshop to have all brake pads inspect· 
ed.  On USA models  the  warning  light EtJ 
comes  on together  with  the  warn ing  light 
1111 -Both sets  of  brake  pads  on an  axle 
must  always  be  replaced  at  the  same  time. 
_& WARNING 
Dr iv ing with  bad  brakes  can  cause  a colli
sion  and  serious  personal  injury. 
- If the  wa rning  light 
EtJ and  the  wa rning 
light 
11111> with  the  message B ra ke 
p ads! 
comes  on  in the  instr ument  cluster 
display,  immediately  contact  your  au
thorized  Aud i dealer  or  qualified  work
shop  to  have a ll brake  pads  checked  or 
replaced  if necessary. 
l )  - : USA models  only 
-
EPC Electronic  power  control 
Applies  to  veh icles: w ith  gasoline  engine 
This  warning/indicator  light  monitors  the 
electronic  power  control . 
The~ warning/indicator  light  (Electronic 
Power  Control)  illuminates  when  you  switch 
the  ignition  on  as  a function  check. 
(D Tips 
If this  warning/indicator  light  illuminates 
while you are  driving,  then  there is a mal
funct ion  in the  engine  electronics.  Have 
the  malfunct ion  corrected  as  soon  as  pos
s ible  by your  authorized  Audi dealer  or 
qualified  workshop. 
W Glow  plug  system 
Applies  to  veh icles: w ith  diesel engine 
The control  light  illuminates  when  the  glow 
plug  system  is active. 
If the Im i ndicator  light  illuminates,  the  glow 
plug system is act ive. You should start  the en
gine  immediately  after  the  ind icator  light 
switches  off.  The  ind icator  light  only i llum i
na tes  for  approximate ly  1 second  if the  en
gine  is warm  or  if the  outside  temperature  is 
above  46  QF (8 QC). 
(D Tips 
-If the  glow  plug  indicator  light  i llum i
nates  while  driving,  there  is an  engine 
contro l ma lfunction.  The engine  should 
be  checked  immed iate ly . 
- If the  indicator  light  does  not  illuminate  at  a ll when  switch ing the  ignition  on, 
there  may  be  a malfunction  in the  glow 
plug  system.  The engine  should  be 
checked. 
' o Malfunction  Indicator  Lamp  (MIL) 
The  Malfunction  Indicator  Lamp (MIL)  is  part 
of the  On-Board Diagnostic  (OBD II)  system. 
T he  symbo l 
¢1111ij lights  up when  the  ignition  is  .,.  
Page 23 of 314

Instruments  and  warning/indicator  lights  21 
switched  on  and  will turn  off  after  the  engine 
has  started  and  has  sett led  at  a  constant  idle 
speed . This  ind icates  that  the  MIL is working 
properly . 
The  warning  light  illuminates when there is a 
malfunction  in the  engine  e lectronic  system . 
Contact  your  author ized  Audi dealer  and  have 
the  malfunction  corrected . 
An improperly  closed  fuel  filler  cap  may  also 
cause  the MIL light  to  illuminate 
¢page 225. 
For  mo re  in format ion  ¢ page 29. 
~.  Diesel  particulate  filter  clogged 
Appl ies  to  vehicles:  with  d iesel  e ngine  and  diese l pa rticu 
late  fi lte r 
II Particulate  filter : System  fault  See  own
er's  manual 
When  the Ill symbol  illuminates,  you  can  al
ter  your  driving  style  to  assist the  filter self
cleaning  process. Drive for  approximately  15 
minutes  with the selector  lever  in the  5  posi
tion  at  a minimum  speed  of  37  mph  (60  km/ 
h)  and  an  engine  speed  of  approximately 
2,000  RPM.  The  temperature  increase  that 
will  resu lt  from  this  can  burn  off the  soot  in 
the  filter . The  symbol  will  switch  off when  the 
cleaning  is  successful.  After  a  successful 
cleaning , there  is no  need to  bring  the  car  to 
an  author ized  dealer  or  qualified  workshop 
because  this  is part  of  normal  vehicle  ope ra
tion . 
If the  symbol 
&I does  not switch  off,  see 
your  author ized  dealer  or other  qualified 
workshop  to  have the  prob lem corrected. 
For  more  informat ion  on  the  d iesel  particu
late  filter , refer  to¢ 
page 208. 
A WARNING 
Always  adapt  your  speed  to  the current 
weather,  road and  traffic  conditions.  You 
should  never  disobey  traffic  laws  in  order 
to  follow  driving recommendations. 
-
!'1 Engine  speed  limitation 
App lies to  veh icles:  w it h e ngine  speed  lim itat io n 
(II Engine  speed maximum  XXXX RPM 
The  engine  speed  is automatically  limited to 
the  speed  d isplayed  in the  driver  information 
system.  This protects  the engine  from  over· 
heating. 
The  engine  speed  limitation deactivates  once 
the  engine  is  no  longer  in  the critical  tempera
ture  range  and  you  have  re leased  the  accelera
tor  pedal  once. 
If the  engine  speed  limitation  was  activated 
by an  engine  control  malfunction,  the  indica
tor  light 
lli also  turns  on.  Make sure  that  the 
speed  does  not go  above  the speed  disp layed. 
Drive to  your authorized  Audi dealer  immedi
ate ly  to  have  the malfunction  corrected. 
~v, Engine  oil  sensor 
Ill Oil level!  Sensor  defective 
If the symbol  illum inates,  contact  your  au
thorized  Audi dea le r  and  have  the  oil sensor 
inspected.  Until  you  have this  done,  check  the 
oi l level  each  time  you  refue l just  to  be  on  the 
safe  side¢ 
page 236. 
Bu Fuel  level  indicator 
Ii') Please  refuel 
If  the  indicator  light turns  on  for  the  first 
time  and  the  message  appears,  there  are 
about  4  gallons (15  liters)  of  fuel  left  in the 
tank.  Time  to  refuel 
q page 224. 
Ii] Tank  system  malfunction!  Contact  dealer 
If th e indicator  light  turns  on  and  this mes
sage  appears,  there  is  a  malfunction in the 
tank  system. 
D rive  to your  authorized  Audi dealer  immedi
ate ly  to  have  the  malfunction  corrected. 
Page 25 of 314

Instruments  and  warning/indicator  lights  23 
Drive s low ly  to  your  authorized  Audi  dealer  or 
qualified  workshop  to  have the  malfunction 
corrected . 
,'I'M Dynamic steering:  initializing 
If thi s driver  message  appears and the  indica
tor  light  is flashing  on  the inst rument  panel , 
dynamic  steering  is being  reiniti alized . Once 
you  sta rt the  engine  after  this is finished,  the 
steering  whee l wi ll be easy to  move . Re-initi
alization  might  be necessary if  the  steering 
wheel  was moved  hard  to  the  left  and r ight 
while  the  veh icle was not  moving.  The displ ay 
goes out  as soon  as  initialization  is complete . 
A WARNING 
-
Have the  dynamic  steering  system  mal 
function  repaired  as  soon as poss ible  by an 
authorized  Audi  dealer  or  any qualified 
workshop  - risk of  accident! 
@ Tips 
-The dynamic  steering  stability  systems 
are not available in  the event of a system 
malfunction. 
- For additional  informat ion on dynamic 
steering,  refer  to 
¢page  110. 
I-: Sport  differential 
Ill Sport  differential:  system fault 
There is a malfunct ion with  the  sport  differen 
tial. 
Drive to  your  authori zed Aud i dea ler  immedi
ately  to  have the  malfunction  corrected. 
Ill Sport  differential:  overheating 
The transmission  temperature  has incre ased 
sign ificantly  due to  the  sporty driving  manner. 
Dr ive  in a less sporty  manner until  the tem
pe rat ure returns  to  the normal  range and the 
indicator  light  switches  of. 
A WARNING 
Contact  your  authorized  Audi  dealer or  a 
qualif ied workshop  if  the  sport  different ial 
is faulty  or  malfunctioning . The repa ir 
-
must  be performed  by trained  personnel 
using the  correct oil  in  order to  ensure 
safety. 
¢¢ Turn  signals 
The indicator light  blinks  when you  use either 
turn signal. 
Whenever  you use the left II or  the  r ight II 
turn  signal,  the  indicator  light blinks. When 
you use the  emergency f lashers,  both  indica
tor  lights  flash . 
If  one  of  the  turn signa l light  bulbs  burn  out, 
the  turn  signal  wi ll blink  twice  as fast  as nor
mal.  Carefu lly drive  to  your  authorized  Audi 
dealer  immed iate ly to  have the  malfunction 
corrected.  The indicator  light  does  not indi
cate  a malfunction  if a turn  signal  on the  tra il
er  or  on the  vehicle  fails in trailer  tow ing 
mode . 
(D Tips 
For more  information  on  the turn  s ignals, 
refer  to¢ 
page  48.  
Page 27 of 314

Instrument s  and  warning /indicator  lights  25 
caused by  the heat  being  radiated  from 
the  engine. 
- You can se lect the  un its  used  fo r temper
atu re, speed and othe r measurements  in 
the  MML 
- Fo r informa tion on the  a udio/video  and 
navigation*  functions,  refer  to  the  se pa
r ate  MMI  ow ner's  manual. 
Operation 
The driver information  system  is operated  us
ing the  buttons  on the  multifunction  steering 
wheel. 
gi g ~------,i 
~ 
F ig . 6  Mult ifu nct io n  stee ring  wheel:  operat ing t he d riv
er  informat ion system 
Fi g.  7  Driver  informat ion  system:  ope ning the  ve hicle 
funct io ns  m en u 
Operating  concept 
..  Switch  the  ign ition  on. 
..  To sw itch  between  t he tabs,  press th e rocker 
switch @to  the  left  or  right 
c> fig . 6 . 
..  To access additional  informat ion be low or 
above,  rotat e the  thumbwheel @ dow n or 
up. 
..  To confi rm  a selection,  press t he  thumb
whee l@ . 
Accessing Vehicle  functions 
.. Sele ct  the first  t ab with  the  ro cker swit ch 
@. 
.. Press the  b utton [jg] _ The Vehicle funct ions 
menu  appears c> fig . 7. 
..  To  select  a menu  item , tu rn and press t he 
thumbwhee l@ . 
Resetting  values  to  ze ro 
..  Select  the on-board  computer / Efficiency 
program 
menu  item  in the Vehicle func
tions 
men u. 
..  Yo u can now  select  between  t he  long-term 
memory  and s hort-term  memory . 
..  To  reset the  values  in a memory,  p ress a nd 
hold  t he thumbwheel @ for  one second . 
The last  function  selected  d isp lays when you 
switc h the  ig nition  on. 
On-board  computer 
You can ca ll  up the followin g in formation  in 
the  on -board  computer: 
- Date 
- Dr iving  t ime (h) from  the shor t-te rm  memo-
ry 
- Average consumption  in  MPG ( l/100  km) 
from  the  short-te rm memory 
- Average speed i n mph  ( km/h)  from  the 
short-te rm  memory 
- Distance driven  in miles (km)  from  the 
short-te rm  memory 
- Cur ren t fue l consumption  in  MPG ( l/100 
km) 
- Short-term  memory  overview 
- Long-term  memory  overview 
T he short-te rm  memory  collects  driv ing  infor
mation  from  the  time  the  ign ition  is switc hed 
on until  it  is switched  off.  If you continue  driv
ing within  two  ho urs after  switch ing the  ig ni
tion  off,  the  new values  are  included  when  cal
cu lating  the  c urrent  trip  information . 
Un like the  short -term  memory,  the  long-term 
memory  is not  erased automatically.  You can 
select  the  time  period  for  evaluating  t rip in
format ion yourse lf .  
Page 29 of 314

Instrument s  and  warning /indicator  lights  2  7 
-The fuel  economy  messages are not  dis
played  in every instance,  but  rathe r in  in
terva ls 
over a period  o f time. 
Cylinder on  demand  System 
App lies to  vehicles:  w ith  4 .0  TFS ! engi ne 
F ig.  10 Inst rume nt cluster:  fuel  consumption 
To save fu el,  the  eng ine automat ic all y t urns 
four  cylinders  o n or 
off, de pending  on the 
amo unt  of  power  needed. This action  is not 
fe lt  by the  passengers. 
Displaying  cylinder  mode 
Requirement:  t he on-bo ard  computer  is di s
pl ayed~ 
page 25. 
~ Turn the  thumbwhee l until  the  current  fue l 
c o nsu mption  display  is shown  in the  inst ru
me nt  cl uster. 
If the  green  ba r is d ispl ayed, 
yo u a re driving  in  4-cylin der m ode. 
Basic requirements  for  4 -cylinder  mode 
4-cy linder  drive  mode  is used automatically  if 
certain  basic requir emen ts are fulfi lled. These 
in clude: 
- A  low  powe r output  requi reme nt. 
- Driving  in third  gear  or  higher. 
- Engine speed  between  960  and  3,500  RP M. 
-A  warm  engine . 
Odometer 
Fig. 11  Instrument  cluste r Odo meter  a nd  reset  button 
The odometer  shows you  how  many  m iles 
(k ilometers)  you  have driven.  You can switch 
the  d isplay from  miles  to  kilomete rs and v ice 
versa via t he  MMI. 
Upper  odometer 
The trip  odometer  shows the  distance  driven 
since it  was last  reset. 
It can be used to  meas
ure s ho rt  d istances . The  last digit  indicates 
1/10  of  a mile  (100  meters) . 
You can  reset the  trip  odometer  to  zero  by 
pressing  the  Reset  button~-
Lower odometer 
The lower  odomete r shows the  tota l num ber 
of  m iles  (kilometers)  dr iven. 
Malfunction  message 
I f th ere is a malfunc tion i n the  in strumen t 
cl us ter, 
DEF will  ap pear  i n the  trip odometer 
display  a rea. Conta ct your  author ized Audi 
dealer  to have the  problem  corrected. 
Time  and  date  display 
Fig . 1 2 Ce nter  console:  ana log  clock  
Page 30 of 314

28  Instruments  and  warning/indicator  lights 
The date  and time  are shown  in the  instru
ment  cluster  d isplay 
c:;, page  24,  fig.  4.  There 
is  also an ana log clock  in the  center  console 
c:;, fig.  12. 
When you  open the  driver's  door, the  date  and 
time  appear  in the  instrument  cluster  display 
for  30  seconds . When  the  ign ition  is switched 
on, the  time  is always displayed  in the  status 
line © regardless  of  the  current  display. 
You can set the  time  on both  clocks and the  date  display  in the  MMI. Refer to  the  MMI 
owner's  manual  for instructions. 
Service  interval  display 
The service interval  display  reminds you  when 
your  next  service is due. 
Fig.  13 Inst rume nt  cluster:  Serv ice  inte rval d isp lay 
The schedule  for  the  next  oil  change or  inspec
tion  is calculated  automatically  and displayed 
accordingly.  The display  works  in two  stages : 
Service  reminder 
30  days before  the  next  service  is due,  a serv
ice reminder  appears in  the  display  when  you 
switch  the  ignition on 
c:;, fig. 13 . 
After  about  S seconds the  display  switches  back to  normal.  The distance  and time  re
maining  are updated  each time  the  ignition  is 
switched  on until  the  date  due for  service  is 
reached . 
Service  due 
When  the  due date  for  service  is reached, the 
message 
Service  due! appears  in the  instru
ment  cluster  immediately  after  you  switch  the 
ignition  on . Additionally,  a warn ing tone  sounds. After  about  5 seconds the  disp
lay 
switches  back to  normal. 
Calling  up  the  service  schedules 
If or when  an oil change  or  inspection  is due, 
can  be shown  in the  MMI display  by selecting 
the  service interval  display in the  car  menu. 
Select the 
ICARI function  button > Car  sys
tems 
control  button > Servicing & checks > 
Service  interval displays. 
Resetting  the  service interval  display 
Your authorized  Audi  dealer will  reset  the  cor
responding  service schedule  after  performing 
the  appropr iate  service on your  vehicle.  You 
also have the  possibility  to  reset  the  oil 
change schedule  after  hav ing performed  an 
o il  change according  to  Aud i specif ications. 
Select the 
I CAR  I function  button > Car sys
tems 
control  button > Servicing & checks > 
Service  Intervals > Reset oil change  interval. 
(D Note 
If  you disconnect  the  battery  term inals,  no 
calculations  can be made for  the  service 
i nterval  disp lay during  th is  time  and no 
serv ice reminder  will  appear.  Remember 
that  observing  the  proper  service  intervals 
i s vitally  important  to  extending the life  of 
your  vehicle,  pa rticularly  the  engine,  and 
maintaining  its  value.  Even if  the  mileage 
driven  is low,  the  maximum  period  of  one 
year from  one service to  the  next  must  not 
be  exceeded. 
(I} Tips 
-Do  not  reset  the  display  between  oil 
changes, otherwise  the  disp lay w ill be  in
correct. 
- The information  in the  Service Reminder 
remains  stored 
even when  the  vehicle 
battery  is disconnected .  
Page 31 of 314

Instrument s  and  warning /indicator  lights 
Open door/hood/rear  lid warning 
Fig.  14 D isplay: doors  and rear  lid  open 
With  the  ignition switched  on, the  warning  il
luminates  when  at  least 
one door  or  the hood 
or the  rear  lid is not  closed.  The symbol  also 
shows you 
which door(s) or  lid  is not  closed. 
In the  illustration  ¢ 
fig.  14 it  is the  driver's 
door  and  the  left  rear  door. 
On-Board  Diagnostic 
system  (OBD) 
Malfunction  Indicator  Lamp  (MIL) 
The Malfunction  Indicator  Lamp (MIL) ¢4 in 
the  instrument  cluster  is part  of the  On-Board  Diagnostic (OBD II) system. 
The  warning/indicator  light  illuminates when 
the  ignition  is switched  on and  goes  out  after 
the  engine  starts  and  the  idle has stabilized. 
This  indicates  that  the  MIL  is work ing proper
ly . 
If  the  light  does  not  go out after  the  engine 
is  started,  or illuminates  while you are  driv
ing, a malfunction  may ex ist  in the  engine  sys
tem.  If the  light  illuminates,  the  catalytic  con
verter  could  be damaged. 
Continue driving 
with  reduced  power (avoid
ing sustained  high speeds  and/or  rapid accel
erat ions) and  have the  condition  corrected. 
Contact your author ized Audi dealer. 
If the  light  illuminates,  the  electronic  speed  limiter  may also be malfunctioning.  For more 
in formation  ¢ 
page  30,  Electronic  speed 
limiter. 
An  improperly  closed fuel filler  cap may a lso 
cause  the  MIL light  to  illuminate¢ 
page  225. 
On-Board Diagnostics 
Fig.  15 Location of Data  Link Connector  (DLC) 
On-Board  Diagnostics  monitors the compo
nents  of your emission  control system.  Each 
monitored  component  in your engine  system 
has  been  assigned  a code . In  case  of a mal
funct ion,  the  component  will be  identified 
and  the  fault  stored  as  a code  in the  control 
module  memory. 
The MIL light  may also  illuminate  if there  is a  leak  in the  on -board fuel  vapor  recovery sys
tem. 
If the  light  illuminates  after  a  refueling, 
stop  the  vehicle and  make sure  the  fuel  filler 
cap  is properly closed ¢ 
page 225. 
In order  to  make an accurate  diagnosis,  the 
stored  data  can only be displayed  using  spe
cial diagnostic  equipment  (generic scan  tool 
for  OBD). 
In order  to  connect  the  special  diagnostic 
equipment,  push the  plug  into  the  Data  Link 
Connector  (DLC). The DLC is located  to  the 
right  of the  hood  release 
¢fig.  15. 
Your authorized  Audi dealer  or a qualified 
service station  can interpret  the  code and  per
form  the  necessary  repair. 
A WARNING 
Do not  use the  diagnost ic connector  for 
personal  use. Incorrect  usage  can cause 
malfunctions,  wh ich can increase  the risk 
of  a collision! 
-
29  
Page 32 of 314

30  Instruments and warning /indicator  lights 
Electronic speed limiter 
Your veh icle  may  be  factory  equ ipped  with 
tires  that  are rated  for  a maximum  speed  of 
130  mph  (210  km/h). This  is less  than the 
maximum  speed  of your  vehicle.  To reduce  the 
risk of  sudden  tire  failure  and  loss  of control  if 
the  vehicle  is operated  at  excessive  speeds, 
your  vehicle  also  has an  electronic  speed  limit
er.  The  electronic  speed  limiter  prevents  your 
vehicle  from  going  faster  than  the  tire  speed  rating.  For  more  informat ion 
c::> page 259. 
If  the  engine  control  unit  receives  faulty  vehi
cle  road  speed  signals,  the  Malfunction  Indi
cator  Lamp  (MIU¢• will illuminate . If  this 
occurs,  contact  the nearest  authorized  Aud i 
dealer  for  assistance. 
58 
Your vehicle's  top  speed  is electronically  limit
ed  to  155  mph  (250  km/h). 
If the  engine  control  unit receives  faulty  vehi 
cle  roadspeed  signals,  the  Ma lfunction  Indica
tor  Lamp  (MIU ¢.id will illuminate. If this oc
curs,  contact  the  nearest  authorized  Audi 
dealer  for  assistance. 
A WARNING 
-
Always  observe  the  posted  speed  limits 
and  adjust  your  speed  to  suit  prevailing 
road,  traffic  and  weather  conditions.  Never 
drive  your vehicle  faster  than  the maxi
mum  speed  rating  of the  tires  installed.