display AUDI A8 2015 Repair Manual

218 Vehicle care and cleaning
- Never clean headlights or tail lights
with a dry cloth or sponge.
- Do not use any cleaning product that
contains alcohol, because they could
cause cracks to form.
-Wheels
- Never use any paint polish or other
abrasive materials.
- Damage to the protective layer on the
rims such as stone chips or scratches
must be repaired immediately.
- Sensors/camera lenses
- Never use warm or hot water to re-
move snow or ice from the camera
lens. This could cause the lens to crack.
- Never use abrasive cleaning materials
or alcohol to clean the camera lens.
This could cause scratches and cracks.
-Windows
- Remove snow and ice on windows and
exterior mirrors with a plastic scraper.
To avoid scratches, move the scraper
only in one direction and not back and
forth.
- Never remove snow or ice from win­
dows and mirrors using warm or hot
water because this could cause cracks
to form.
- To avoid damage to the rear window
defogger, do not apply any stickers on
the heating wires on the inside of the
window.
- Decorative parts/trim
- Never use chrome care or cleaning
products.
- Paint
-To reduce the risk of scratches, the ve-
hicle must be free of dirt and dust be­
fore polishing or waxing.
- To prevent paint damage, do not polish
or wax the vehicle in direct sunlight.
- To reduce the risk of paint damage, do
not polish away rust film .
- Remove cosmetics and sunblock imme­
diately. Otherwise, the paint could be
damaged .
-Trim
- To reduce the risk of damage, do not
treat the trim around the panorama
sunroof with paint polish.
- Decorative decals
-To reduce the risk of damage, do not
use any rough powder or abrasive
cleaning products .
- To reduce the risk of damage, do not
polish decorative parts that have a
matte finish .
-Displays
-To avoid scratches, do not use dry
cleaning methods on displays.
- Controls
- Make sure that no fluids enter the con-
trols, because this could cause dam­
age.
- Safety belts
- Do not remove the safety belts to clean
them.
- Never clean safety belts or their com­
ponents chemically or with corrosive
fluids or solvents and never allow
sharp objects to come into contact
with the safety belts. This could cause
damage to the belt webbing.
- If there is damage to the webbing, the
connections, the retractors or the buck­ les, have them replaced by an author­
ized Audi dealer or a qualified work­
shop.
- Textiles/Vinyl/Alcantara
- Never treat Vinyl/Alcantara with leath-
er care products, solvents, floor polish,
shoe polish, stain remover or similar
products.
- To avoid damage, have stubborn stains
removed by an authorized Audi dealer
or a qualified workshop.
- Never use steam cleaners, brushes,
hard sponges, etc. when cleaning.
- Do not turn on the seat heating* to dry
the seat.
- Objects with sharp edges such as zip­
pers, rivets on clothing or belts can
cause damage to the surface.

.. Loosen the loop C? fig. 193 from the retaine r
and then pull on t he loop carefully
~CD-
.. Press on the left s ide of the fuel filler door
to open C?page 223, fig. 190.
(D Note
Only pull on the loop until you feel resist­
ance. You will not hear it release . Other­
w ise you could damage the emergency re­
lease mechanism .
Selective catalytic
reduction
General information
Applies to vehicles: with d iesel e ng in e
On vehicles w ith select ive catalytic reduction,
an urea solut ion (Ad Blue) is injected into the
exhaust system befo re a nitrogen oxide cata ­
lytic converter to reduce nitrogen emiss ions .
The AdBlue is stored in a separate tank in the
ve hicle. The Ad Blue usage accounts for ap­
prox imately 0 .5% to 1.2% of the diesel fuel
that is used .
You must refill the Ad Blue or have it refilled by your authorized Audi dealer or qualified
workshop as soon as the Ad Blue refill mes ­
sage appears in the instrument cluster
C? poge 226.
,& WARNING
Failure to hee d Ad Blue refi ll information in
t he ins trument cl uste r can preven t the ve­
hicle from being s tarted and d rive n. If the
vehicle cannot be driven and an eme rgency
ar ises, persona l injury can occur.
- Always have the Ad Blue tank refilled well
before the tank runs dry .
@ Tips
-The ins trument clus ter display indi cates
the distance remaining that ca n be driv­
en
C? page 225 . If the Ad Blue tank is
complete ly empty, the engi ne will not
start again after the ignition is switched
off.
Fu el suppl y and filli ng your fuel t ank 225
- Ad Blue is req uired by law to ope rate this
vehicle .
Indicator in the instrument cluster
display
Applies to vehicles: wit h diese l engine
The display indicates if the Ad Blue level is low
or if it was filled incorrectly.
Fi g. 194 In strume nt cl uste r: indicator in the d isp lay
AdBlue level low
You w ill be informed if t he Ad B lue in the tank
drops below a certa in level.
Please refill Ad Blue. Range 1500 miles
( 2400 km )
This indicator appears when there is on ly
enough AdBl ue left to drive the distance indi­
cated in the driver information system. Please
add AdBlue.
AdBlue /; Refill AdBlue! Cannot start en­
gine in 600 miles (1000 km) ! See owner 's
manu al
This indicator appears when there is only
enough Ad Bl ue left to d rive the distance indi­
cated in the driver information system. Please
add AdBl ue. Otherwise the engine will not
start again if you stop it once the distance in­
dicated has been driven.
Refill AdBlue! No rest art! See
owner's m anual
T his message appears w hen the Ad Blue tank
is empty. P lease ad d Ad Blue. Otherwise you
will not be able to start the eng ine again once
you stop it. ..,.

226 Fuel supply and filling your fuel tank
When the minimum AdBlue leve l has been
reached, you must add Ad Blue ¢
page 226.
¢-fi Filling incorrectly
If the Ad Blue tank was filled with a different
fluid than Ad Blue and the system detects that
it is incorrect, a message w ill appear.
Ad Blue../ AdBlue: Sy stem fault No restart
in 600 miles (1000 km)! See owner's man­
ual
This message appears when it is only poss ible
to drive the distance indicated in the dr iver in­
formation system. Drive to the nearest quali­
fied workshop to have the malfunction re­
pa ired. Otherwise the engine will not start
again if you stop it once the distance ind icated
has been driven.
Ad Blue: System fault No restart!
See owner's manual
This message appears if the system detects it
was filled incorrect ly. Drive immed iately to
the nearest qualified workshop to have the
malfunction repaired. Otherwise you will not
be ab le to start the engine again once you
stop it.
Filling AdBlue
Applies to vehicles: with diesel engine
A special refill bottle must be used to fill the
AdBlue .
Fig. 195 Rig ht rear vehicle s ide: removing the Ad B lue
filler cap
Fig. 196 AdBl ue fille r tube: inse rti ng the refill bottle
The Ad Blue filler tube is located near the d ie ­
sel fi ller tube . Always add 1 ga llon (3.8 liters)
of Ad Blue (two bott les) . Th is is the minimum
amount required to ensure the system detects
the refill ing and to start the engine . You can
add a maximum of approxima tely 4 gallons
(16 liters).
Opening the filler tube and adding
AdBlue
Requirement: The request to add Ad Blue must
appear in the instrument cluster display.
" Switch the ignition off.
"O pen the tank cover
r::!> page 223.
"Tur n the Ad B lue filler cap counterclockwise
to remove it
r::!> fig. 195.
"Remove the cap from the refill bottle .
.. Position the refill bottle on the filler tube
and turn the bottle clockwise until it stops
turning (Dr:!>fig .196 .
" Press lightly against the bottom of the bot­
tle @to empty it. Continue pressing the
bottom of the bottle until it is empty or un­
til flu id stops flowing into the tank.
" Turn the bottle to the left w ithout pressing
on the bottom.
Closing the filler tube
" Turn the AdB lue fi ller cap clockw ise on the
fi ller tube until you hear it engage.
" Close the tank cover.
After filling
The vehicle must be driven. The system may
take up to two minutes to detect that the
AdBlue has been f illed. .,.

,....,
N ,....,
N
0 J:
'SI: ,...., \!) 1.1"1 ,...., 1.1"1 ,....,
~ If there was no Ad Blue left in the tank and a
range of
O mi (0 km ) was displayed in the
instrument cluster, switch the ignition on
for about 15 seconds before starting the en­
gine.
_& WARNING
Ad Blue can irr itate the skin, eyes and res­
piratory system . If there is contact with
the fluid, flus h immed iately with plenty of
wate r. Consult a physician if necessary.
(D Not e
-Only use Ad Blue that conforms to the
standard ISO 22241-1. Do not mix any
additives with the Ad Blue and do not di­ l ute it with water .
- Do not add Ad B lue to the diesel tank or
add diesel fuel to the Ad Blue tank. M ix­
i ng can lead to damage to the engine
and the Ad Blue tank system . The Limited
New Vehicle Warranty does not cover
such damage.
- Ad Blue attacks surfaces such as painted
vehicle components, plastic and carpet.
Remove the fluid as quick ly as possib le
with a damp cloth and plenty of cold wa­
ter. If the Ad Blue has already crystal­
lized, use warm water and a sponge.
AdBlue residue that is not removed w ill
crystall ize and can damage the affected
surface.
- Do not store the refill bottle in the vehi­ cle. If it leaks, the escap ing Ad B lue could
damage the vehicle inter ior.
- Do not allow Ad Blue to come into con­
tact with clothing. If there is contact
with the flu id, flush immediately with
plenty of water.
(D Tips
- You can obtain refill bott les from any au­
thorized Audi dealer or other qua lified
workshop.
- Follow the AdBl ue manufacturer's in­
str uctions for usage and sto rage.
Fu el su ppl y and fi lling yo ur fu el t an k 22 7
•
•

,....,
N ,....,
N
0 J:
'SI: ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
Engine oil consumption
The e ngine in your vehicle dep ends on an ade ­
quate amount of oil to lubricate and cool all
of its m oving parts .
In order to provide effective l ubrication and
cooling of internal engine components, all in­
ternal combustion eng ines consume a certain
amo unt of o il. O il cons umption varies from
engine to eng ine and may c hange significant ly
over the li fe o f the eng ine . T yp ica lly, eng ines
with a specified break -in per io d (see
¢
page 205) cons ume more oi l during the
b reak-in period than they consume after oil
consumption has stabilized.
Unde r norma l conditions, the ra te of oil con ­
sumption depends on the quality and viscosity
of the oi l, the RPM (revo lutions per minute) at
which the eng ine is operated, the ambient
temperature and road condit ions. Further fac­
tors are t he amount of oil d ilution from wate r
condensation or fuel residue and the ox ida ­
t ion level of the o il. As any engine is subject to
wear as mileage bu ilds up, the o il consump­
tion may in crease over t ime un til re p la cement
of worn componen ts may become necessa ry.
W ith all these var iabl es com ing in to play, no
standa rd rate of o il cons umption can be es­
t a blishe d or specifie d. T he re is no a lterna tive
t o regular and freq uen t ch ecking of the oi l lev­
e l, see
Note .
If the ye llow eng ine o il level war ning symbol
in t he ins trumen t clus te r
II light s up, yo u
should che ck t he o il level as soon as possible
¢
page 233 or ¢ page 23 4. Top off t he oil at
your ea rliest convenience ¢
page 234.
A WARNING
Before yo u check anything in the engine
compartment, always read and heed all
WAR NINGS
¢ .&. in Working in the engine
compartment on page 228.
Dr iving with an insufficient oi l level is like­
ly to ca use seve re damage to the eng ine.
-
Checkin g and fillin g
(D Tips
- The oil pressure warning display. is
not an indicator of the oil level. Do not
rely on it. Instead, check the oil level in
your engine at regular intervals, pref­
erably each time you refuel, and always
before going on a long trip .
-If you have the impressi on yo ur engi ne
cons umes excess ive amounts of oil, we
recommend that you consult your Aud i
dea le r to have the cause of your concer n
properly diagno sed . K eep in mi nd th at
t he a ccu rate meas urement o f oil con ­
sumption requi res g reat care and may
take some t ime . Your Audi dea le r h as i n­
struct io ns about how to measure oil con­
sumption acc urate ly.
Checking the engine oil level
App lies to vehicles : wit h oil level indicator
Fig. 201 D isp lay: o il leve l indicator
.,. Par k yo ur vehicle o n a level su rface.
.,. Shu t the eng ine off when it is warm.
.,. Switch on ly the ignition back on.
.,. Wa it app roximately two minutes .
.,. Select:
!CAR ! functio n button > Car systems
cont ro l button > Servicing & checks > Oil
level.
.,. Check t he oil level i n the display ¢ fig. 201.
Add eng ine o il if the bar of the oil leve l ind i­
cato r is nea r "m in"¢
page 234 .
Depending o n the way the vehicle is dr iven
and the ope rat ing cond it ions, o il cons umption
can be up to 1/2 quart per 600 miles (0 .5 liter
per 1,000 km). Consumption may b e hig he r
within the first 3, 000 miles (5 ,0 00 km). ..,,.
233
•
•

234 Checking and filling
@ Tips
The oi l level i ndicator in the MMI Display is
only an in format ion d isp lay .
If the oil leve l
is low, a minim um o il warning appears in
the instrument cluster. Add oi l
c::> page 234. If the hood has bee n ope ned,
the c urrent oil level is shown in the instru­
men t cluster t he nex t time the ig nition is
s w itche d on .
Checking the engine oil level
Appl ies to vehicles: with oil dipstick
Fig . 202 Oi l di pstick: ma rk ing field s
Before you check any thing in the engine com­
pa rtment,
always read an heed all WARN­
INGS c::> page 2 28 .
Determining the oil level
.. Park your vehicle on a level surface .
.. Let the engine run in idle briefly while it is at
operating tempe ratu re and then shut the
engi ne off.
.. Wait approxima tely two min utes .
.. Remove the oil d ipst ic k. W ipe off t he oil dip­
st ick with a cle an clot h an d inse rt it all the
w ay in ag ain .
.. Remove the d ipstick again and then rea d the
o il level
c::> fig. 202 . Add engine oi l if neces­
sary
c::> page 234.
Oil level in the G) area
.. Do no t add any oi l.
Oil level in the @area
.. You may add oil. After adding oi l, the leve l
sho uld be in the @ area .
Oil level in the @ area
.. Yo u mu st ad d oil. A fter a dding oi l, the level
should be in the
0 area .
D epend ing on the way the vehi cle is dr iven
and the ope ra tin g con dit ions, oi l consu mption
ca n be up to 1/2 qu art pe r 600 miles (0.5 liter
per 1,00 0 km). Cons umption may be h ig he r
within the first 3,000 miles (5,000 km) . Be ­
ca use of this, the engine oil leve l must be
c h ecked regu la rly. It wo uld be best to check
each time you refue l your veh icle and before
lo ng d rives.
Adding engine oil "l::r.
Fig. 2 03 Engin e compartm en t: cove r on th e e ng in e o il
f ill e r neck
Befo re you c heck a nyth ing in the engin e com­
partment ,
always read and heed all WARN­
INGS c::> .&. in Wo rking in the engine compart ­
men t on page 22 8.
"' Shut the eng ine off .
"' Un screw the cap
't=;,1 to the eng ine oil filling
hole
c::> fig. 203, c::> page 230 .
.. Ca refully top off with 0 .5 qu arts ( 0.5 liters)
of t he appropriate oil
c::> page 231 .
"' Check t he oi l level aga in after two m in utes
c::> page 233, Checking the engine oil level or
c::> page 234, Checking the engine oil level.
.. Top off the o il aga in, if necessary.
"' Sc rew the cap back on the filling hole .
_&, WARNING
--W hile topping off, th e oil m ust n ot com e
i n c onta ct w ith hot e ngine parts - fi re
haza rd! ..,.

264 Tires and wheels
remain continuously illuminated. This se­
quence will continue upon subsequent vehicle
start-ups as long as the malfunction exists.
When the malfunction indicator is illuminat­
ed, the system may not be able to detect or
signal low tire pressure as intended . TPMS
malfunctions may occur for a variety of rea­
sons , including the installation of replace­
ment or alternate tires or wheels on the vehi­
cle that prevent the TPMS from functioning
properly . Always check the TPMS malfunction
tellta le after replacing one or more tires or
wheels on your veh icle to ensure that the re­
placement or alternate tires and wheels allow
the TPMS to continue to function properly.
Tire pressure indicator appears
The tire pressure indicator in the instrument
cluster informs you if the tire pressure is too
low or if there is a system malfunction.
Fig. 213 Display : underi nflatio n warning
Fig. 214 Display: System mal functio n
Using the ABS sensors , the tire pressure moni­
toring system compares the tire tread circum­
ference and vibration characteristics of the in­
dividual tires . If the pressure decreases in one
or more tires, th is is indicated in the i nstru- ment
cluster with a warning symbol
[I] and a
message
r=> fig. 213 .
The tire pressure monitoring system must be
reset via MMI each time the pressures are ad­
justed (e.g. when switching between partial
and full load pressure) or after changing or re­
plac ing a tire on your vehicle
r=> page 265. The
TPMS indicator only monitors the tire pres­
sure that you have previously stored. You can
find the recommended tire pressures for your
vehicle on the Label on dr iver's side B-pillar
r=> page 249.
Tire tread circumference and vibration charac­
teristics can change and cause a tire pressure
warning if:
- the tire pressure in one or more tires is too
low,
- the tire has structural damage,
- the tire pressure was changed, wheels rotat -
ed or replaced but the TPMS was not reset
¢ page 265,
-the spare tire* is mounted.
Warning symbols
[I] Loss of pressure in at least one tire¢&,. .
Check the tire or tires and replace or repa ir if
necessary . The indicator light
[I] in the instru­
ment cluster also illuminates
¢page 11.
Check/correct the pressures of all four tires
and reset TPMS via MMI.
Ill (T ire Pressure Monitoring System) Tire
pressure! System malfunction.
Iflll appears
after switching the ignition on or while driving
¢fig . 214 and the indicator light [I] in the in­
strument cluster blinks for approximately one minute and then stays on, there is a system
malfunction . Attempt to store the correct tire
pressure ¢
page 265. If the indicator light
does not turn off or if it turns on shortly
thereafter , immediately drive your vehicle to
an a utho rized Aud i dealer or authorized repair
facility to have the malfunction corrected.
llll-

,....,
N ,....,
N
0 J:
'SI: ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
A WARNING ,~
- If the tire pressure indicator appears in
the instrument cluster display, one or
more of your tires is significantly under­
inflated. Reduce your speed immediately
and avoid any hard steering or braking
maneuvers. Stop as soon as possible and
check the tires and their pressures. In­
flate the tire pressure to the proper pres­
sure as indicated on the vehicle's tire
pressure label¢
page 249. Driving on a
signif icantly under-inflated tire causes
the tire to overheat and can lead to tire
failure. Under-inflation also is likely to impair the vehicle's handling and stop­
ping ability .
- The driver is responsible for maintaining the correct tire pressures. You must check the tire pressures regularly.
- Under certain conditions (such as a spor­
ty driving style, winter conditions or un­ paved roads), the pressure monitor indi­
cator may be delayed.
-Ask your authorized Audi dealer if run­
flat tires may be used on your vehicle.
.
(0 Tips
- The tire pressure monitoring system may
stop working when there is an ESC mal­
function.
- Using snow chains may result in a system
malfunction .
- The tire pressure monitoring system on your Audi was developed using tires with
the "AO" or "RO" identification on the
tire sidewall
¢page 256. We recom­
mend using these tires.
Reset tire pressure monitoring system
If the tire pressure is adjusted, wheels are ro­
tated or changed, the TPMS must be reset via
MMI.
.,. Before storing the new tire pressures, check
that the current pressures on all four tires
correspond to the specified values and
Tires and wheels 265
adapt the pressures to the current load
¢page 249 .
.,. Switch on the ignition.
.,. Select in the MMI:
ICARI function button >
Car systems control button > Servicing &
checks > Tire pressure monitoring > Store
tire pressures > Yes, store now.
(D Tips
Do not store the tire pressure if there are
snow chains on the tire. Otherwise, a sys ­
tem malfunction may occur .
•
•

.... N .... N
0 J:
'SI: .... \!) 1.1'1
.... 1.1'1 ,-0
Fuse pa nel @ (brown )
No . Equipment
1 Headlight contro l switch
2
Emergency start coil (key
i dentification)
3
Rear door control module
(driver's side)
4 Head-up Display
5 Horn
6 Inter ior lights (head liner)
Steering column lever, mul-
8
tifunction steering wheel
controls, steering wheel
heat ing
10
Electric steering co lumn
lock
11 D river door contro l modu le
12
D iagnostic connector, light/
rain sensor
14
Power steering col umn ad -
justment
15
Power steering, A/C com-
presse r
16 Brake booster
Fu se pa nel © (b la ck)
No . Equipment
1 Front seat heating
2 Windshield w iper
3 Front exterior lighting
4 Sun roof
5 Driver power window
6 Driver seat (pneumat ic)
7 Panoramic sunroof
8 Dynamic steering
9 Front exterior lighting
10 Windshield/headlight
wash-
er system
11
Rear power w indow (driver's
side)
12 Panoramic sunroof
Amps
5
5
7,5 5
15
7,5
10/5
5
7,5 10
25
20
15
Amps
30 30
30 20
30
7,5
20 35
30
35
30
40
Fu ses and bulb s 2 77
Front passenger side cockpit fuse
assignment
Fig . 233 Fro nt passe nger side cockpit: f use pane l with
plast ic brac ket
Fu se panel @ (bl ac k)
No. Equipment Amps
1 Anti-theft alarm system 5
2
Transmission control mod-
15
ule
3 Front climate control fan 40
4 Engine supply 35
6
Engine cont ro l modu le 5
7
Front passenger door con-
7,5 trol module
8
Front passenger power win-
30 dow
9 ESC contro l module
10
10
ESC contro l modu le 25
1 1
Right rear power window 30
1 2
Front passenger seat (pneu-
7,5 matics)
•
•

280 Fuses and bulb s
No. Equipment Amps
7 TV tuner 5
8 Infotainment un it/drives 7,5
9
I nstrument cluster, analog
5
clock
10 MMI Display 5
11 Radio receiver 7,5
1 2
Rearview camera (park ing
5 aid), Top view
Bulbs
Replacing light bulbs
For your safety, we recommend that you have
your authorized Audi dealer replace burned out bulbs for you .
It is becoming increasingly more and more
difficult to replace vehicle light bulbs s ince in
many cases, other parts of the car must first
be removed before you are able to get to the
bu lb . Thi s applies especially to the light bu lbs
in the front of your car which you can only
reach through the engine compartment .
Sheet metal and bulb holders can have sharp
edges that can cause ser ious cuts, and parts
must be correctly taken apart and then prop­
erly put back together to help prevent break­
age of parts and long term damage from wa­
ter that can enter housings that have not been
properly resealed.
F or your safety, we recommend that you have
your authorized Audi dealer replace any bulbs
for you, since your dealer has the proper tools,
the correct bu lbs and the expertise.
Gas discharge lamps (Xenon lights):
Due to the high electrical vo ltage, have the
bu lbs rep laced by a qualified technician.
Headlights with Xenon light can be ident ified
by the high voltage sticke r.
LE D headlights* require no ma intenance .
Please contact your authorized Aud i dealer if a
bu lb needs to be replaced.
A WARNING
Contact with high-voltage components of
the electrical system and improper re­
placement of gas discharge (Xenon) head­
light bulbs can cause ser ious personal in­
jury and death.
- Xenon bulbs are pressur ized and can ex­
p lode when being changed.
- Changing Xenon lamps requ ires the spe­
cial tra ining, instructions and equip­
ment.
- Only an authorized Audi dealer or other
qualified workshop should change the
bu lbs in gas discharge lamps .
A WARNING
There are parts with sharp edges on the
openings and on the bulb holders that can
cause serious cuts.
- If you are uncertain about what to do,
have the work performed by an author­
ized Audi dealer or other qualified work ­
shop. Serious personal injury may result
from improperly performed work.
(D Tips
-If you must replace the light bulbs your­
self, a lways remember that the engine
compartment of any vehicle is a hazard­
ous area to work in. Always read and
heed all WARNINGS
c> page 228.
-It is best to ask your authorized Audi
dealer whenever you need to change a
bulb.
-