wheel bolts AUDI A8 2015 Owners Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2015, Model line: A8, Model: AUDI A8 2015Pages: 312, PDF Size: 79.18 MB
Page 260 of 312
258 Tires and wheels
T up to 118 mph (190 km/h)
U up to 124 mph (200 km/h)
H up to 130 mph (210 km/h)
V up to 149 mph (240 km/h)
1l
Z over 149 mph (240 km/h)ll
W up to 168 mph (270 km/h)ll
Y up to 186 mph (298 km/h)l)
Your veh icle is normally factory equipped with
tires, which possess excellent driving charac
teristics and give your Audi opt imum driving
comfort. An electronic speed limiter
c:> page 30 will normally prevent your vehicle
from going faster than the tire speed rating
c:> & .
U.S . DOT Tire Identification Number (TIN)
and tire manufacture date
This is the tire's "serial number". It begins
with the letters "DOT" and indicates that the
tire meets all federal standards. The next two
numbers or letters indicate the plant where it
was manufactured, and the last four numbers
r epresent the week and year of manufacture.
F or example, the numbers 2214 mean the tire
was produced in the 22nd week of 2014. The
other numbers are marketing codes that may
or may not be used by the tire manufacturer .
T his information is used to contact consumers
if a tire defect requires a recall.
Audi original tire
Tires with the identification "AO" or "RO" have
been specially matched with your Audi . We
recommend using only these tires because
they meet the highest standards regarding
safety and driving characteristics when used
correctly . Your authorized Audi dealer will
gladly provide you with more information .
Tire ply composition and materials used
The number of plies indicates the number of
layers of rubber-coated fabric in the tire. In
general, the greater the number of plies, the more weight a tire can support. Tire manufac -
ll F t· "t h .
o r ires w 1 a m ax im um spee d ca pabil ity ove r 149
mph (2 40 km/ h), ti re manufact urers sometimes use
the lett ers " ZR."
turers also must indicate the materials in the
tire, which include steel, nylon, polyester, and
others .
Maximum Load Rating
Th is number ind icates the max imum load in
kilograms and pounds that can be carried by
the tire .
Tire quality grading for treadwear,
traction , and temperature resistance
Tread wear, traction and tempera ture grades
c:>page 259.
Maximum Permissible Inflation Pressure
This number is the greatest amount of a ir
pressure that should ever be put in the tire
un der normal driv ing conditions .
_& WARNING
= -
- Using incorrect or unmatched tires and/
or wheels or improper tire and wheel
combinations can lead to loss of control
collision and serious personal injury.
'
- Always use tires, rims and whee l bolts
that meet the specifications of original factory-installed tires or other combina
tions that have been specifically ap
proved by the vehicle manufacturer.
- Tires age even if they are not being used
and can fail suddenly, especially at high
speeds. Tires that are more than 6 years
old can only be used in an emergency
and then w ith special care and at lower
speeds.
- Never mount used tires on your veh icle if
you are not sure of the ir "previous histo
ry." Old used tires may have been dam
aged even though the damage cannot be
seen that can lead to sudden tire fa ilure
and loss of vehicle control.
- All four whee ls must be fitted with radial
tires of the same type, size (rolling cir cumference) and the same tread pattern . ..,_
Page 263 of 312
,....,
N ,....,
N
0 J:
'SI: ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
The speed rating letter code (c::> page 248) is
on the side wall of the tire
c::> page 256.
A WARNING
Winter tires have maximum speed limits
that may be lower than your vehicle's max
imum speed . Always know the maximum
speed before driving off. Never drive faster
than the speed permitted for your specific
winter tires . This will cause damage to the
tires leading to an accident and serious
personal injury to you and your passen
gers.
A WARNING
Driving faster than the maximum speed
for which the winter tires on your vehicle
were designed can cause tire failure in cluding a blowout and sudden deflation,
loss of control, crashes and serious per
sonal injuries . Have worn or damaged tires
replaced immediately.
- Winter tires have maximum speed rating
that may be lower than your vehicle's
maximum speed .
- Never drive faster than the speed for
which the winter or other tires installed
on your vehicle are rated .
A WARNING
Always adjust your driving to the road and
traffic conditions. Never let the good ac
celeration of the winter tires and all-wheel
drive tempt you into taking extra risks . Al
ways remember :
- When braking, an all-wheel drive vehicle
handles in the same way as a front drive
vehicle.
- Drive carefully and reduce your speed on
icy and slippery roads, even winter tires
cannot help under black ice conditions.
@l For the sake of the environment
Use summer tires when weather condi
tions permit. They are quieter, do not wear
as quickly and reduce fuel consumption.
-
Tires and wheels
Snow chains
Snow chains may be fitted only to the front
wheels , and only to certain tire sizes. Ask your
authorized Audi dealer on which tire sizes
snow chains can be used.
If you are going to use snow chains, then you
must install them on the front wheels at
least.
The snow chains must have low-profile links
and must not be thicker than 0.4 inch
(10,S mm) , including the lock.
Remove wheel center covers and trim discs
before putting snow chains on your vehicle
c::> (]) . For safety reasons cover caps must then
be fitted over the wheel bolts. These are avail
able from authorized Audi dealers.
A WARNING ,..__
Using the wrong snow chains for your vehi
cle or installing them incorrectly can in
crease the risk of loss of control leading to
serious personal injury.
- Snow chains are available in different
sizes . Always make sure to follow the in
structions provided by the snow chain manufacturer .
- When driving with snow chains never
drive faster than the speed permitted for
your specific snow chains .
- Always observe local regulations.
(D Note
- Remove snow chains before driving on
roads not covered with snow to avoid
damaging tires and wearing the snow
chains down unnecessarily.
- Snow chains, which come into direct con
tact with the wheel rim, can scratch or
damage it. Therefore, make sure that the
snow chains are suitably covered . Check
the position of the snow chains after
driving a few yards and correct if neces
sary. Follow the instructions from the
snow chain manufacturer when doing so.
- If the Adaptive Air Suspension should
malfunction, do not mount or use snow ..,.
261
•
•
Page 264 of 312
26 2 T ire s and wheel s
chains because the vehicle will be ex
tremely low. If you do drive with snow
chains on while the vehicle is at this lev
el, the snow chains might severe ly dam
age the wheelhouse and other parts of
the veh icle.
(D} Tips
Where snow chains are mandatory oncer
tain roads, this normally also applies to
veh icles with All Wheel Drive.
Wheel bolts
Wheel bolts must always be tightened to the
correct torque .
The design of whee l bolts is matched to the
factory installed r ims. If different rims
are fit
ted, the correct wheel bolts with the right length and correctly shaped bolt heads must
be used. This ensures that wheels are fitted
secure ly and that the brake system functions
correctly .
In certain circumstances, you may not use
wheel bolts from a different vehicle -even if it
is the same mode l
¢page 292.
_& WARNING
Imprope rly tig htened o r maintained whee l
bolts can be come loose ca using loss of
contro l, a co llision and serious persona l in
jury.
- Always keep the wheel bol ts and the
threads in the wheel hubs clean so the
wheel bolts can tu rn easily and be prop
er ly tightened .
- Never grease or oil the wheel bo lts and
the threads in the wheel h ubs. They can
become loose w hile driving if greased or
oiled, even if tightened to the specif ied
torque.
- Only use wheel bolts that belong to the rim being installed.
- Never use different whee ls bolts on your
vehicle.
- Always maintain the correct tighten ing
torq ue for the wheel bo lts to reduce the risk of a whee
l loss. If the tightening tor
que of the wheel bolts is too low, they
can loosen and come out when the vehi
cle is mov ing. If the tighte ning torque is
too high, the wheel bolts a nd threads
can be damaged and the whee l can be
come loose.
([) Note
The specified torque for the whee l bolts is
90 ft lb (120 Nm) with a tolerance of± 7,4
ft lb(± 10 Nm). Torque whee l bolts diago
nally. Afte r changing a whee l, the torque
must be checked as soon as possible wi th a
torque wrench -pre ferably by an au thor
ized Audi dealer or qualified workshop .
Low aspect ratio tires
Your Audi is factory-equipped with low aspect
ratio tires. These tires have been thoro ughly
tested and been se lected specifically for your
model for their superb performance, road fee l
and hand ling u nder a var iety of d riv ing condi
t ions . As k your author ized Audi dealer for
more details.
The low aspect ratio of these tires is ind icated
by a numeral of
55 or less in the tire's s ize
designation . The numeral rep resents the ratio
of the t ire's s idewa ll height in relation to its
t read width ex pressed in percentage. Conven
tiona l tires have a he igh t/w idth rat io of 60 or
more.
The performanc e of low -a sp ec t-ratio tires i s
pa rticularly sensitive to improper inflation
pre ssure . It is therefore important that low
a spect ratio tires are inflated to the specified
pre ssure and th at the inflation pressure i s
regularly checked and maintained. Tire pre s
s u res should be checked at least once a
month and always befo re a long trip
¢ page 251, Checking tire pressure .
What you can do to avoid tire and rim
damage
Low aspect ratio tires can be damaged more
easily by impact w ith potholes, curbs, gull ies .,..
Page 269 of 312
.... N .... N
0 J:
'
"' ....
"' ....
Vehicle tool kit
Vehicle tool kit and jack
The vehicle tool kit is located in the luggage
compartment under the cargo floor cover.
Fi g. 217 Luggage compartment: cargo floor cover
folded upward
Fig. 218 Trunk lid: Vehicle too l ki t
.. Lift the cargo floor by the plastic handle.
.. Hook the handle into the luggage compart
ment weather strip ¢
fig. 217.
.. Remove the spare wheel to reach the vehicle
tool kit .
.. Remove the foam p iece.
The onboard tool kit includes:
- Hooks to remove the wheel
covers* or wheel
hub covers
- Plastic hook to
remove wheel bolt covers*
- Wheel bolt wrench
- Al ignment p in for changing wheels
- Screwdriver with reversible blade
- Towing loop
- Jack
Before storing the jack, make sure it is wound
back down as far as it will go.
What do I d o now ? 267
A WARNING
Im proper use of the vehicle jack can cause
serious personal injur ies.
- Never use the screw driver hex head to
tighten wheel bolts, since the bolts can
not attain the necessary tighten ing tor
que if you use the hex head, potentially
causing an accident.
- The factory-supplied jack is intended on
ly for yo ur vehicle model. Under no c ir
cumstances should it be used to lift heavy veh icles or other loads; you risk in
ju ring yo urself.
- Never start the engine when the vehicle
is raised, wh ich could cause an acc ident.
- Support the vehicle securely with appro
priate stands if work is to be performed
underneath the vehicle; otherwise, there
is a potentia l risk for injury.
- Never use the jack supplied wit h your
Audi on another vehicle, particularly on a
heavier one. The jack is only s uitable for
use on the vehicle it came with.
(D Tips
-Some of the onboard items listed above
are provided on certain models only or
are optional ext ras .
- Before yo u can raise your vehicle using
the jack, you must activate the jacking
mode
¢page 272 .
Page 272 of 312
2 70 What do I do now ?
-Always store the vehicle tool kit, the jack
and the replaced t ire in the luggage com
partment ¢
page 139.
@ Tips
Before changing the wheel, yo u m ust acti
vate t he jac king mode, so t hat the auto
mat ic cont rols fo r the Adaptive Air S us
pens io n do not make it mo re diff ic u lt to
lift the vehicle with the jack
c.';> page 2 72.
Changing a wheel
When you change a wheel, follow these
quence described below step-by-step and in
exactly that order .
1. Activate the vehicle jack mode
¢page 272.
2. Remove the decorative wheel cover* . For
more deta ils see also
¢ page 270, Deco
rative wh eel covers
o r ¢ page 2 71 ,
Wheels with wheel bolt caps.
3 . Loosen the wheel bolts ¢ page 2 71.
4. Locate the proper mo unt ing po in t for the
j ack and align t he jack be low tha t poi nt
¢ page 272 or r::!>page 273.
5. Raise the car with the jack¢ page 272 or
¢page 273.
6. Remove the wheel with the flat tire and
then i nstall
the spare ¢page 274.
7. Tighten all wheel bolts ligh tly.
8 .
Lower th e ve hicle w it h the jack .
9 . Use the whee l bolt wren ch and
firmly
tig hte n al l whee l bolts ¢p age 271.
10. Rep lace the decorative wheel cover* .
11. D eactivate t he ve hicle jack mode in the
M MI :
!CARI function button > Car systems
control button > Se rvicing & checks > Air
susp.: jack mode
> Off .
The vehicle jac k mode sw itches off automati
cally at speeds above 10 km/h.
A WARNING
Always read and follow all WARNINGS and
informati on
¢ .&. in AB: Raising the vehicle
on page 272
and ¢page 275 .
After changing a wheel
A wheel change is not complete without the
doing the following .
.,. Always store the vehicle tool kit, the jack"
and the rep laced tire in the luggage com
pa rtment
¢ page 139.
.,. Check the tire pressure on the spare whee l
immed iate ly afte r mounting i t.
.,. As soon as poss ible, h ave the
tightening
torques
on all whee l bolts che cked with a
torque wre nch. The correc t tig hten ing tor
que is 90 ft l b (120 Nm).
.,. Have the flat tire
replaced as s oon as possi
ble.
@ Tips
- If you not ice that the w heel bo lts a re
co rroded and difficult to turn while
chang ing a tire, t hey shou ld be rep laced
before you check the tig htening to rque.
- Dr ive at reduced speed until you have the
t ightening torques checked.
- After changing a whee l, the t ire p ress ure
in all four tires must be chec ked/co rrect
ed and the tire p ress ure monito ring in di
cator must b e sto red in th e MMI
¢ page 265.
' Decorative wheel covers
Applies to vehicles: w ith decorative whee l covers
The decorative wheel covers must be removed
first to access the wheel bolts.
Fig. 2 21 Cha ngin g a w hee l: Remov ing th e w heel cove r
Removing
.,. Insert the hook (prov ided w ith th e vehicle
t oo l ki t) in the hole in the whee l hub cover . ..,.
Page 273 of 312
.... N .... N
0 J:
"". .... I.O
"' ....
"' ....
.. Pull off the decorati ve wheel c over
r=>fig. 221 .
Wheels with wheel bolt caps
Applies to vehicles: with wheel bolts with caps
The caps must be removed first from the
wheel bolts before the bolts can be un
screwed .
Fig. 222 C hanging a wheel: remov ing the wheel bolt
caps
R em oving
.. Push the pla stic clip (provided with the vehi
cle tool kit) over the whee l bolt cap unt il the
inner retainers on the clip al ign with the
edge of the cover.
.. Remove the cap with the
plas tic clip (vehicle
tool kit)
r=>fig . 222.
R efitting
.. Place the caps ove r the wheel bo lts and
push them back on.
The caps are to protect and keep the wheel
bol ts clean.
What do I d o now ? 271
Loosening and tightening the wheel
, bolts
The wheel bolts must be loosened before rais
ing the vehicle .
Fig . 2 23 Changing a whee l: loosen ing the wheel bolts
Loosen ing
.. Slide the w he el wrench onto the wheel bo lt
as far as it will go .
.. Take tight hold of the
end of the wrench
handle and turn the wheel bo lts
c ounter
cloc kwi se
about one single turn in the direc
tion of arrow
r=> fig . 223.
T ight ening
.. Slide the wheel wrench onto the wheel bolt
as far as it will go.
.. Take tight hold of the
end of the wrench
handle and turn each wheel bolt
clockwise
until it is seated .
A WARNING
-Do not use fo rce or hurry when changing
a wheel - you can ca use the vehicle to slip
off the jack and cause ser ious pe rsonal
inj uries.
- Do not loosen the wheel bo lts more than
one turn
befo re you raise the vehicle with
the jack . -Yo u risk an injury .
(D Tips
-Never use the hexagona l soc ket in the
hand le of the screwdr iver to loosen or
t igh ten the wheel bolts .
- If a wheel bolt is very tight, you may find
it eas ier to loose n by carefully pushing
down on the end of the wheel bolt
wrench with
one foot only. As you do so, Ill>-
Page 276 of 312
274 What do I do now ?
-Passengers must not rema in in the ve
h icle when it is jacked up.
- Make sure that passengers wait in a
safe p lace away from the vehicle and
well away from the road and traffic.
- Make sure jack position is correct, ad
just as necessary and then continue to
raise the jack.
- Changes in temperature or load can af
fect the height of the vehicle.
CD Note
D o not lift t he vehicle by the si ll. Position
the vehicle jack only at the designated lift
ing points on the sill. Otherwise, your vehi
cle will be damaged.
@ Tips
The vehicle jack mode switches off auto mat ica lly at speeds above
10 km/h.
Taking the wheel off/installing the spare
Follow these instructions step-by-step for
changing the wheel.
Fi g. 228 Changing a wheel: using the screwdrive r han
dle (w ith t he blade r emoved) to turn the bo lts
F ig . 2 29 Changing a whee l: a lignmen t pin inside th e
top hole
After yo u have loosened all wheel bo lts and
raised the vehicle off the ground, remove and
replace the wheel as follows:
Removing the wheel
.,. Use the hexagonal soc ket in the scr ewdriv
er handle
to completely remove the top
most whee l bolt and se t it aside on a
clean
surface r=> fig. 228 .
.,. Screw the threaded end of the alignme nt
pin from the tool kit hand-t ight into th e
empty bolt hole
Q fig. 229 .
.,. Then remove the other whee l bolts as de
scribed above.
.,. Take off the whee l leaving the a lignment pin
in the bo lt ho le r=> 0 .
Putting on the spare wheel
.,. Lift the spare whee l and carefully s lide it
over the alignment p in to g uide it in place
Q0 .
.,. Use the hexagona l socket in th e screwdriver
ha ndle to screw in and tig hten all whee l
bolts
slightly.
.,. Remove the al ignment pin and insert and
tighten the remain ing wheel bolt slightly
like the rest .
.,. Turn the jack hand le counter-clockwise to
lower the vehicle until the jack is fully re
leased .
.,. Use the wheel bo lt wrench to tighten all
wheel bo lts fi rm ly
r=> page 271 . Tighten
them
crosswise, from o ne bolt to the (ap
p rox ima tely) opposi te one, to keep the
wheel ce nte red .
CD Note
When remov ing or i nsta lling the whee l,
the rim could hit t he b ra ke ro to r and d am
age the ro tor. Wor k caref ully and have a
seco nd person hel p you.
(D Tips
Never use the hexagon al socke t in the han
d le of t he screwdriver to loosen or tighten
the wheel bo lts .
Ill-
Page 277 of 312
,....,
N .... N
0 J:
'SI: .... \!) ..,.,
.... ..,., ....
-Pull the reversible blade from the screw
driver before you use the hexagonal
socket in the handle to turn the wheel
bolts.
- When mounting tires with
unidirectional
tread design
make sure the tread pat
tern is pointed the right way
<=>pag e 275.
- The wheel bolts should be clean and easy
to turn. Check for dirt and corrosion on
the mating surfaces of both the wheel
and the hub . Remove all dirt from these
surfaces before remounting the wheel.
Tires with unidirectional tread design
Tires with unidirectional tread design must be
mounted with their tread pattern pointed in the right direction.
Using a spare tire with a tread pattern
intended for use in a specific direction
When using a spare tire with a tread pattern
intended for use in a specific direction, please
note the following:
- The direction of rotation is marked by an ar
row on the side of the tire.
- If the spare tire has to be installed in the in
correct direction, use the spare tire only
temporarily since the tire will not be able to
achieve its optimum performance character
istics with regard to aquaplaning, noise and
wear.
- We recommend that you pay particular at
tention to this fact during wet weather and
that you adjust your speed to match road
conditions.
- Replace the flat tire with a new one and
have it installed on your vehicle as soon as
possible to restore the handling advantages
of a unidirectional tire.
Notes on wheel changing
Please read the information <=> page 256, New
tires and replacing tires and wheels
if you are
going to use a spare tire which is different
from the tires on your vehicle .
What do I do now? 275
After you change a tire:
-Check the tire pressure on the spare imme
diately after installation.
- Have the wheel bolt tightening torque
checked with a torque wrench as soon as
possible by your authorized Audi dealer or
a qualified service station.
- With steel and alloy wheel rims, the wheel
bolts are correctly tightened at a torque of
90 ft lb (120 Nm).
- If you notice that the wheel bolts are cor
roded and difficult to turn while changing
a tire, they should be replaced before you
check the tightening torque.
- Replace the flat tire with a new one and
have it installed on your vehicle as soon as
possible. Remount the wheel cover.
Until then, drive with extra care and at re
duced speeds.
A WARNING
-
- If you are going to equip your vehicle
with tires or rims which differ from those
which were factory installed, then be sure to read the information<=>
page 256,
New tires and replacing tires and
wheels .
-Always make sure the damaged wheel or
even a flat tire and the jack and tool kit
are properly secured in the luggage com
partment and are not loose in the pas
senger compartment .
- In an accident or sudden maneuver they
could fly forward, injuring anyone in the
vehicle.
-Always store damaged wheel, jack and
tools securely in the luggage compart
ment. Otherwise, in an accident or sud
den maneuver they could fly forward,
causing injury to passengers in the vehi
cle. •
•
Page 308 of 312
306 Index
New tires and wheels . ... .. .. .. .... . 256
Rep lacing . .... . ...... ... .. .. .... . 257
Snow chains . .. ... .... ... .. .. .... . 261
Tires and vehicle load lim its .. .. ..... 253
Wheel bolts .. ............. .. .... . 262
W inter t ires .............. ... .. ... 260
Tire service life .. .. ..... ... .. .. .... . 255
Tools . .. .. ... ............ .. .. .. .. . 267
Torn or frayed safety belts . . . . . . . . . . . . 146
Towing Tow tr uck procedures . ... .. .. .... .. . 283
TPMS Tire pressure monitor ing system 263, 264
Trailer towing ................. .... . 210
Operating instructions .............. 210
Park ing system ..... ...... .. .. .. .. . 130
Technical requirements ........ 210,211
Trailer towing tips .......... .. .... . 212
Train (transporting your veh icle) .. ..... 285
Transm iss ion .... . ...... ... .. .. .... . 114
Transm iss io n malfunct ion (ind icator
light) . .. .. .. ..... ........... ... .. . 118
Transport Canada .......... .. .. .... . 141
Transport ing you r vehi cle . ... .. .. .... . 285
Tread Wear Indicato r (TWI) ....... .... 255
Trip odometer . . . . . . . . . . . . . . . . . . . . . . . 26
What does it mean when DEF appears in
the trip odometer d isplay? ... .. .. .. . . 26
Trunk
refer to L uggage compartme nt lid ... . . 37
T runk escape hand le . .... .... ... .. .. . 266
Turn signa ls .. .. . .......... .. .. .... .. 48
War ning/ indicator lights ....... .. .. .. 23
u
ULSD No . 2 (Diese l fuel) ..... .. .. .. .. . 221
Unfasten ing safe ty belts ............. 14 8
Un id irect iona l tires . ...... .. .. .. .. .. . 245
Uniform ti re quality grading ... .... .. . 259
Un lock ing
L uggage compartmen t lid ...... .. .. .. 37
P ower locking sw itch ................ 36
Remote contro l ..... ... .. .. .. .... .. 35
Using the key .. ..... ... .. .. .. .... .. 36
V
Valet parking .... .. ... .. ..... ... .. .. . 42
Vanity mir ro rs . . . . . . . . . . . . . . . . . . . 51, 52
Vehicle ca re/clean ing ..................... 214
Vehicle control modules ........ .. .. .. 196
Vehicle electr ical system . . . . . . . . . . . . . . 16
Vehicle identification label ..... ... .. .. 287
Vehicle Ident ifi cat io n Numbe r (V IN ) .. .. 28 7
Vehicle jack . .... .......... 267,272,273
Vehicle lite ratu re .. .. ... ..... ... .. .. .. 5
Vehicle shutt-down .................. 207
Vehicle transport ................... 285
Ventila tion . . . . . . . . . . . . . . . . . . . . . . . . . 78
Vinyl Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . 217
w
Warning/ind icat or lights ........... .. . 11
Airbag system . . . . . . . . . . . . . . . . . . . . . 18
Anti- lock b rak ing system (ABS) . .. .. .. . 19
B rake system . . . . . . . . . . . . . . . . . . . . . . 14
El ectromechani cal pa rking brake . .... . 15
El ectronic power con trol . . . . . . . . . . . . . 20
El ectronic Stabilization Con tro l (ESC) . .. 18
Generator ..... .. .. ... ..... ... .. .. . 16
G low p lug system . . . . . . . . . . . . . . . . . . 20
Instrument cluster ............. .. .. . 10
Malfunction Indicator Lamp (MIL) .. .. . 20
Safety be lt . . . . . . . . . . . . . . . . . . . . . . . . 17
T urn signals . .. ............ ........ 23
Warning/Indicator lights
Airbag system . . . . . . . . . . . . . . . 161, 162
PASSENGER AIR BAG OFF ........... 162
Wa rranty coverages . .. .. ..... .... . .. 290
Washe r reservo ir .. ................ . 244
Wear indicato r .... .. ... ..... ... .. .. 255
Weights .. .. .... .. ............. .... 28 7
What happens if you wear your safety belt
too loose? ...... ....... ........... . 147
What happens to unbe lted occupants? . . 144
What impa irs d riving safety? .......... 134
Wha t should I do after changing a
whee l? ........ .... .... ........... . 252
What shou ld I do after replacing whee ls? 252
Page 309 of 312
,....,
N ,....,
N
0 J:
'SI: ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
Wheel bolts
Torq ue ... .. .. .. .. .. .... ... .. .. ...
262
W heels ... .. ................. .. ... 2 4 5
Chec king tire pressu re ..... .. .. .. .. . 25 1
Cleaning . .. .. ........... .. .. .. ... 215
Cold ti re inflat ion pressu re ... .. .. .. . 249
General notes . . . . . . . . . . . . . . . . . . . . . 245
Glossary of tir e and loading termino lo-
gy .. .. .. .. ................. .. .. .
246
New tires and wheels ...... .. .. .. .. . 256
Tires and vehicle load limits .. .. ... .. 253
When must a safety belt be rep laced? .. 146
W hen must the airbag syste m be inspect-
ed? ... .. .. .. .... ............. .. .. .
16 1
When shou ld I adjust the tire pressures? 252
When shou ld I check the tire pressures? . 25 2
Where are lower anchorages located? .. . 188
Where can I find the tire pressures for my
car? .. .... .. .. ............. .. .. ...
251
W hy safety be lts? . . . . . . . . . . . . . . 143, 1 44
W ild a nimal detection .......... ... .. 11 1
Windows
C leaning/remov ing ice ..... .. .. .. .. .
216
defrosting .. ............. .... .. .... 80
W indshield
C leaning ... .. .... .... ... .. .. .. ....
53
defrosting .. ............. .... .. .. .. 80
W indshield washe r system .. .. .. .. .. .. 5 3
Washer fluid leve l . . . . . . . . . . . . . . . . . . 2 2
Washer rese rvoir . ..... ... .. .. .. .. . 244
W indshield w ipe rs
C lea ning . .. ............. .... .. .. ..
54
Fo lding up . . . . . . . . . . . . . . . . . . . . . . . . 54
Indicator ligh t . . . . . . . . . . . . . . . . . . . . . 22
Replacing w indshield wiper blades ... .. 54
Sw itching on/off . . . . . . . . . . . . . . . . . . . 53
W inte r operation
Ba ttery . . . . . . . . . . . . . . . . . . . . . . . . . .
240
Ca r washes . ............. .... .. .. . 2 14
Cooling system . ... .... ... .. .. .. ... 236
Defrosting windows . . . . . . . . . . . . . . . . . 80
Removing ice from windows . ... .. .. . 216
Seat heating . . . . . . . . . . . . . . . . . . . . . . . 80
Steer ing whee l heating .... .. .. .. .. .. 81
T ires .. .. .. .. ........ ... .. ... ... . 202
Winter ti res . ... .... .... ... .. .. .. ... 260
All-whee l drive . ... .... ... .. .. .. ... 260
Inde x 307
X •
Xenon-Lights . ........ .. .. ..... ... .. 2 80 •
Xenon plus headl ights ... .. ... ..... .. . 46