garage door opener AUDI ALLROAD 2000 Owners Manual

-------------�-------CONTROLS AND
EQUIPMEN T
Audi Homelink ® Uni versal Transm itter*
-� ....... ..
The Audi Homelink ® Un iversal Transm itter
is located on the driver's side sun visor.
This innovative feature will learn the radio
frequency codes of most current transmit­
ters used to activate garage doors, entry
door locks, estate gates, security systems,
and home or office lighting.
The Homelink ® Universal Transmitter is ca­
pable of operating up to three separately
controlled devices. The
Homelink ® operates off the vehicles
battery and charging system and has non­
volatile memory. If the battery dies or is dis­
connected, Homelink® will retain all pro­
gramming.
�W ARNING
When programming the Audi
Homelink® Universal Transm itter,
you may be operating a garage
door or estate gate. Make sure that
people and objects are out of the
way to prevent potential harm or
damage. Note
Do not
use this Audi Homelink®
Universal Transmitter with any ga­
rage door opener that lacks the
safety stop and reverse feature as
required by federal safety stan­
dards. This includes any garage door
opener model manufactured before
April 1, 1982.
A garage door opener which cannot
detect an object, signaling the door
to stop and reverse does not meet
current federal safety standards.
Using a garage door opener without
these features increases risk of seri­
ous injury or death.
For more information, call toll-free:
1 (800) 355-3515.
173

CONT
ROLS AND EQUIPMENT---------------------
I
I
I
;
f
'
.
,
· ·- --- -.. ... �-//
1 - Channel 1
2- Channel 2
3- Channel 3
A- Indicator Light
B - Optimal placement of hand-held
transmitter during training.
17 4 Initial
Programming of the
Audi HomeUnk ® Universal
Tr ansmitter
1 - Turn the ignition switch on.
2- Prepare for programming the
Homelink ® Un iversal Transm itter by
erasing the three factory default chan­
nels:
Simu ltaneously press and hold chan­
nels 1 and 3 -releasing only when the
indic ator light (A) begins to flash after
20 seconds.
3 - Hold the end of the hand-held transmit­
ter of the device you wish to train
approximately 2 inches away from the
surface of the Homelink ® channels -
. keeping the indicator light in view.
4- Using both hands, simultaneously push
the hand-held transmitter button and
one of the Homelink ® channels. Do
not release until step 5 has been com­
pleted. .
.... . ..
--�,
j � 1,)1B4B-283 .
5 - The Home link® indicator light will flash
first slowly, and then rapidly. When the
ind icator light flashes rapidly, both the
button and channel may be released .
If you wish, repeat procedures 3 through 5
to program the rema ining channels.
If a garage door opener has been pro­
grammed but does not activate with
Homelink ®, proceed to the following sec­
tion: "Training a Garage Door Equipped with
Rolling Code"

Training a Garage Door
Equip ped with Rolling Code
To train your rolling code garage door
opener to operate from your Homelink®
Universal Transmi tter, follow these steps
after completing the "Program­
ming" portion of this text (the aid of a sec­
ond person may make the training quicker
and easier):
1 - Locate and press and relaaaa the
training (or "learning") button on the
garage door opener motor head unit.
(Exact location and color of the button
may vary by garage door opener brand.)
If there is difficulty locating the training
button, reference the garage door
opener owner's manual or call toll free:
1- 800-355- 3515.
2 - Return to the vehicle and press and re­
lease the progr ammed Homelink ®
channel. Press and release the
Homelink ® channel a second time to
complete the progra mming process.
(Some garage door openers may re­
qu i· re you to do this procedure a thir d
ti me.) The
garage door opener should now recog­
nize the Audi Homelink ® Un iversal Trans­
mitter. You may use either the hand-held
transmitter or the Audi Home link® Univer­
sal Transmi tter to activate the garage door.
Oper ating the Audi HomeLink ®
Uni versal Transmitter
1 - Tum the ignition switch on.
2 - Select and firmly press and release the
appropriate channel (1, 2, or 3) to acti­
vate the trained device (e.g. garage
door, estate gate, home security sy­
stem, entry door lock, or home or office
lighting). CONTROLS
AND EQUIPMENT
Erasing the Audi HomeLink ®
Universal Transm itter's Pro­
gramming
1 - Turn the ignition switch on.
2 - Simult aneously press and hold chan­
nels 1 and 3 until the indicator light be­
gins to flash after 20 seconds.
3 - Release both buttons.
This process will erase the trained codes of
the three channels or erase the factory set
default codes.
The Audi Homelink ® Un iversal Transmitter
is now in the train (or progra mming) mode
and can be progra mmed at any time follow­
ing steps 3 through 5 in the "Progr amming"
portion of this text.
175

- Capacities
. . . • . . . . . . . . • . . . 287
-C oolant . . . . . . . .
238
-W indshield washer tank . . . . 250
Fog lights .. .. .. .. .
. 149
Folding master key _ . . . . . . • . . 56
Four- Wheel Drive . . . . . • • . . 207
Front airbags .
. . . • • • . . . 25
Front axle load . . . • • . • • • . 289
Front fog lights .... ... .... .. .. 149
Front seats . . . . . . . . . . . . . . . . . . . . 76
Fuel -Tank capacity . . . . . . . . . . 222
Fuel economy . . . . . . . . . • . 19
5
Fuel gauge . . . . • • . . . .
119
Fuel supply . . . . . . . . . . . . . • . . . . . 225
Fuel tank . . . . . • . . . . . . . . 222
- Capacity
. • . • • . . • . . • • • . . 287
Fuses . . . •
... .•.. .• • .. . .. 274
G
Garage door opener ...• , • . . . . 173
Gas discharge lamps . . .
277
Gasoline additives . . . . .
227
Gauges and instruments
- Coolant temperature 118 -
Engine oil temperature
-F uel ........ . ..
117
.. 119
- Odometer . . . . . • . . • . . • . . . 11 9
- Speedometer . • . . . . . . . . . . 119
-T achome ter .. _. _...... ... 117
General illustration .
. . . . 8
Gen erator ....... ..... .
Glove box light ... .
Glo ve compartment . . . .
Ground clearance ... . _ .. 12
0, 127
17 8
17 8
153
Gross axle weight rating ...... . 289
289
Gross vehicle weight rating .... .
H
Head airbags . • . • . . • • • .•. . . 39
Head restraints . . . . • . . . . . 75
Headlight adjustment . . • . • • .
148
Headlight dimmer .....• , • . . . .
156
Headlight flasher . . . . . . . . . . . • . . 157
Headlights -Cleaning . .
214
Heated seats . . . . . . . . .
150
Heated steering wheel . 150
Heating . . . . . . . . . . . . . . 162
High beam . . . . . . . . . . . • . . . . . . 12
5 ALP
HABETIC AL INDE X
High voltage label
. . . . . • • . • 291
Hood release . . .
231
Hooks . . . . . . . . . • • • • • . .
.. 89
Horn . . . . . . . . . . . • • • . _ .. . .. .. . . . 8
Hydropla ning . . . . 195, 207
I
Identification label ..
291
Identification number ....... ... 290
Ign ition .................. ... 113
Ignition key safety interlock ..... 104
Immobilize r............. 57,
124
Increasing size of luggage
compartment ..... .
Ind icator lights ...... .
Infant seats .......... .
Inside day-night mirror
Installing a radio ..... .
Installing a roof rack ..
Installing wiper blades
Instru ment cluster .... ....
88
10, 122
. 45
. 72
277
191
. . .. -... 251
. . 116
Ins trument illumination . 14 9
Instrument panel . . . . .
. . . 8
Interior lights . . . . . . . . . . . . . . . 171