parking brake AUDI Q3 2017 Owner´s Manual

Driving Emergency mode
Applies to: ve hicles w ith a utomat ic t ransm iss io ns
In the event of a system malfunction, there is an
emergency program.
If all of the selector lever positions are highligh t­
ed with a light background in the instrument
cluster display, there is a system malfunction and
the S tronic transmission is running in the emer­
gency program. The vehicle can still be driven in
emergency mode, but only with reduced speed
and not in all gears. In some cases, the vehicle
cannot drive in reverse.
@) Note
If the transmission runs in emergency mode,
drive to an authorized Audi dealer or author­
ized Audi Service Facility immediately to have
the malfunction corrected.
Transmission malfunction
A pp lies to: ve hicles w ith a uto mat ic t ra n smi ssio ns
• Transmission overheating! Please stop vehi­
cle!
The transmission is too hot and can become dam­
aged. Stop and let the transmission cool with the
engine running (at idle) in the P selector lever po­
sition. Then the indicator light and the message
tur n off, drive to an authorized Audi dealer or au­
thorized Audi Service Facility immediately to have
the malfunction corrected. If the indicator light
and the driver message do not turn off, do not
continue driving . See an authorized Audi dealer
or authorized Audi Service Facil ity for assistance.
72
Selector lever emergency release
App lies to : vehicles wi th automatic transm issions
If the vehicle's power supply fails, the selector
lever can be released in an emergency .
Fig. 77 Selector leve r: remov ing the cove r
Fig. 78 Selector leve r: emerge ncy release
To maneuver or tow the vehicle, the emergency
release must be used to move the selector lever
from the P position.
Using the emergency release can be complicated .
We r ecommend contacting an authorized Audi
dealer or authorized Audi Service Facility for as­
sistance, if necessary .
A maintenance tool from the vehicle tool kit
must be used to release ¢
page 197.
Preparations
.,. To prevent your vehicle from rolling uninten­
tionally , set the parking brake(®) or press the
brake pedal ¢
LD,. .
.,. Insert the flat side of the maintenance tool
sideways in the slot near the shift cover and pry
off the shift cover¢
fig. 77 .
.. Pull the frame and the cover upward. You can
fold the cover up over the shifter knob . ..,_

00
00
......
"' ,....
"' ...... 0 0 :::,
00
Selector lever emergency release
"' Press and hold the yellow re le a se button
~ fig. 78.
"' Press the b utton on the selector lever and move
t h e leve r into N position .
"' Clip the frame to the cover again.
A WARNING
Only move the se lector lever out of the P posi­
tion when the parking b rake is set. If that
does not work , secure the vehicle wi th the
brake pedal. The vehicle can roll away if it is
no t secured and ca use a crash.
Driving
73

Trailer towing
Sp eed
The higher the speed, the more d ifficult it be­
comes for the driver to contro l the rig. Do not
dr ive at the maximum permissible speed. Reduce
your speed even more if load, w eather or wind
conditions are unfavorable -particularly when
going downhill.
Red uce vehicle speed
immediatel y if the trai le r
shows the s lightest sign of swaying .
Do not try
to stop the swayin g by ac cele rating.
Observe speed limits . In some areas, speeds for
vehicles towing trailers are lower than for reg ular
ve hicles.
A lways apply b rakes early . When dr iving down­
hi ll, shi ft into a lower gear to use the engine
braking effect to slow the vehicle. Use of the
brakes a lone can cause them to overheat and fail.
Coolant temperature
The coolant temperatu re gauge ¢ page 8 must
be observed ca refully . If the needle moves close
to the upper end of the scale, reduce speed im ­
mediately and/or turn off the air conditioner .
I f t he coolan t temperature warn ing light i n the
instr ument cluster s tarts flashing ., pull off
the road, stop and let the engine
idle for about
two minutes to prevent heat bu ild-up .
A WARNING
Anyone not properly restrained in a moving
vehicle is at a much greater risk in an acci­
dent . Never let anyone ride in your car who is
not properly wearing the restraints provided
by Audi .
Trailer towing
information
Important to know
Your veh icle hand les different ly when tow ing a
tra iler because of the additional weight and dif ­
fe rent weight d istr ibut ion . Safety, performance
and economy w ill great ly depend on how careful­
ly you load you r trailer and operate your rig .
76
Before you actually tow your trailer, practice
turning, stopping and backing up in an area away
from traffic . Keep pract icing unt il yo u h ave be ­
come comp lete ly familiar w ith the way your vehi­
cle-tra iler combination behaves and responds.
Backing up is difficult and requires practice .
Backing up w ith a trailer generally req uires steer ­
i ng action opposite to that when backing up your
vehicle without a trailer.
Maintain a greater distance between your vehicle
and the one in front of you . You will need more
room to stop. To compensate for the trailer, you
will need a larger than normal turning radius.
When passing, remember that you cannot accel­ erate as fast as you normally wou ld because of
the added load. Make sure you have enough room
to pass. After passing, allow p lenty of room for
your trailer before changing lanes again.
Avo id jerky starts, sharp turns or rapid lane
changes.
(D Tips
- Do not tow a trailer during the break-in peri­
od of your veh icle.
- If you tow a trai ler, your Audi may requi re
more frequent maintenance due to the ex­
tra load
¢ page 218.
' Parking on a slope
Do not park on a slope with a trailer. If it cannot
be avoided, do so only after doing the following:
When parking:
.,. App ly the foot bra ke .
.,. Have someone place cho cks under bot h the ve­
hicle and the trailer wheels .
.,. With choc ks in place, slowly release the brakes
until the wheel chocks absorb the load.
.,. Turn the wheels towards the curb .
.,. App ly the parking brake .
.,. Move the selector lever to P .
When restarting after parking :
.,. App ly the foot brake .
.,. Start the eng ine .
.,. Move the se lector lever to D/S.

00
00
......
"' ,....
"' ...... 0 0 :::,
00
~ Release the parking brake and slow ly pull out
and away from the whee l chocks.
~ Stop and have someone retrieve t he whee l
chocks .
(D Tips
If you move the selector lever of the a utomat­
ic transm ission to P before applying the park­
ing brake and before block ing the wheels, you
may have to use more force later to move the
lever out of the P position .
Trailer towing
77

00
00
......
"' ,....
"' ...... 0 0 :::,
00
pollutants in the exhaust gas before they are re­
leased into the atmosphere.
The exclusive use of unleaded fue l is critically im­
portant for the life of the catalytic converter and
proper functioning of the engine .
~ WARNING
-The temperature of the exhaust system is
high, both when driving and after stopping
the engine.
- Never touch the exha ust ta il pipes once they
have become hot. This could result in burns.
- Do not park or operate the vehicle in areas
where the hot exhaust system may come in
contact with dry grass, brush, fuel spill or
other mater ial which can cause a fire.
- Do not apply additional undercoating or
rustproof ing on or near the exhaust mani­
fold, exhaust pipes, catalytic converter or
heat shields. During dr iv ing, the substance
used for undercoating could overheat and
cause a fire.
(D Note
- Be aware that just o ne tank filling with
lead ed fue l will already ser iously degrade
the pe rformance of the catalytic co nverter .
- Do not exceed the correct eng ine o il level
c::;, page 164.
- Do not drive until the fuel tank becomes
completely empty. The engine could mis­
fire. Unburned fuel could also get into the
exhaust system and th is cou ld cause the
c ata lytic converter to overheat.
- Do not turn off the ignition whi le the vehicle
i s mov ing.
- Do not continue to operate your veh icle un­
der these cond it ions, as otherwise fue l can
r each the cataly tic conve rte r. This cou ld re­
s ul t in ove rheating of the converter, req uir­
i ng its re placement.
- To assure efficient operation of the Em is ­
s ion Control System:
- Have your vehicle maintained properly and
in accordance with the service recommen­
dations in your Warranty
& Maintenance
booklet.
-
Ch eck ing and Filling
-Lack of proper ma intenance as well as im ­
p roper use of the vehicle w ill impair the
f u nct ion o f the emission control system
and could lead to damage.
® For the sake of the environment
Even when the Emiss ion Control System is op­
erating properly, the exhaust gas can have a
su lfur -like exhaust gas sme ll under some op­
erating states. This depends on the sulfur
content of the fuel being used. Us ing a d iffer­
ent brand of fuel may help, or f illing the tank
wi th lead-free supe r g rade gasoline.
Engine compartment
Working in the engine compartment
Special care is required if you are working in the
engine comportment
For work in th e engine compartm ent su ch as
che cking and filling fluids, there i s a ri sk of in­
jury, scalding , accident s, and burn s. For thi s
reason , follow all the warnings and gene ral
s afety p re caution s prov ided in the following in·
formatio n. The engine compartment is a dan­
gerous area on the vehicle.
c::;, .&. .
A WARNING
-- T urn the engine off.
- Sw itch the ignition off.
- Set the parking brake .
- Move the selector lever into t he P position .
- Neve r open the hood whe n there is steam o r
coo lant escaping from the engine compart ­
ment, because there is a risk that you could
be burned. Wait unt il no steam or coolant is
escaping.
- Let the eng ine cool down.
- Keep children away from the eng ine com -
partment.
- Never sp ill fluids on a ho t engine. These flu ­
ids (such as the anti -freezing agent con ­
tained in the coolant) can ignite .
- Avoid short c ircui ts in the elect rical sys tem.
- W hen working in the engi ne comp artme nt,
remember that the radiator fan can swi tch
159

Checking and Filling
on even if the ignition is switched off, which
increases the risk of personal injury.
- Never open the cap on the coolant expan­
sion tank when the engine is warm. The
cooling system is under pressure.
- To protect your face, hands, and arms from
hot steam or coolant, cover the cap with a
large cloth when opening.
- Do not remove the engine cover under any
circumstances . This increases the risk of
burns.
- If tests need to be performed with the en­ gine running, there is additional danger due
to moving components (such as the ribbed
belt, alternator and radiator fan) and from
the high-voltage ignition system .
- Do not under any circumstances activate the throttle inadvertently (for example, by hand
from the engine compartment) if the vehi­
cle is stationary but the engine is running
and a gear is engaged. Otherwise, the vehi­
cle will start to move immediately and this
could result in an accident.
- Pay attention to the following warnings list­
ed when work on the fuel system or on the
electrical equipment is required.
- Do not smoke .
- Never work near open flames.
- Always have a working fire extinguisher
nearby
- To reduce the risk of electric shock and in­
jury, never touch the following components when the engine is running or is being start­
ed:
- Ignition cable - Other components in the electronic high-
voltage ignition system
- If you must check or perform work on the
engine while it is running:
- Set the parking brake and place the selec­
tor lever in the P (park) position first .
- Always proceed with extreme caution so that clothing, jewelry or long hair do not
become caught in the radiator fan, fan
belt or other moving components or do
not come into contact with hot compo­
nents . Tie back long hair before beginning
160
work and do not wear clothing that can
hang down into the engine .
- Limit your exposure to exhaust and chemi­
cals to as short a time as possible
c:> ,& .
-All work on the battery or electrical system
in your vehicle can result in injuries, chemi­
cal burns, accidents or burns. Because of
this, all work must be performed
only by an
authorized Audi dealer or authorized Audi
Service Facility .
A WARNING
California Proposition 6S Warning:
- Engine exhaust , some of its constituents,
and certain vehicle components contain or
emit chemicals known to the State of Cali­
fornia to cause cancer and birth defects and
reproductive harm . In addition, certain flu­
ids contained in vehicles and certain prod­
ucts of component wear contain or emit
chemicals known to the State of California
to cause cancer and birth defects or other reproductive harm .
- Battery posts, terminals and related acces ·
sories contain lead and lead compounds,
chemicals known to the State of California
to cause cancer and reproductive harms. Wash hands after handling.
(D Note
When filling fluids, be sure not to mix the flu­ids up. Otherwise severe malfunctions and en­
gine damage will occur .
@I For the sake of the environment
You should regularly check the ground under
your vehicle in order to detect leaks quickly. If
there are visible spots from oil or other fluids, bring your vehicle to an authorized Audi deal ­
er or authorized Audi Service Facility to be
checked .

a:,
a:,
...... N r--. N .-< 0 0 ::, a:,
Emergency assistance
General information
.. Park the vehicle as far as poss ible from moving
traffic in the event of a breakdown. In the event
of a flat tire, park the vehicle on a leve l surface .
It you are on a steep h ill, be especially careful.
.. Set the parking brake .
.. Switch the emergency flashe rs on .
.. Put on a reflective vest .
.. Set up the warn ing triang le, if available .
.. Have the passengers exi t the veh icle. They
sho uld move to a safe place, for example be­
hind a guard rail.
_& WARNING
Follow the steps given above. This is for your
protection and the for the safety of other d riv ­
ers.
_& WARNING
Improper use of the vehicle jack can cause se ­
rious personal injuries .
- Never use the screw driver hex head to
t ighten whee l bolts, since the bolts cannot
attain the necessary tighten ing torque if you
use the hex head, potentially causing an ac­
c ident .
- The factory-supplied jack is intended only
for your vehicle model. Under no circum­
stances should it be used to lift heavy
vehicles o r other loads; yo u ris k inju ring
yo urself.
- Never start the engine when the vehicle is
ra ised, which could cause a n accident.
- Support the veh icle secure ly with app ropr i­
a te s tan ds if wor k is to be performed under­
neath t he vehicle; otherwise, the re is a po­
tent ial ris k for i njur y.
- Never use the jack s upplied with yo ur Audi
on another vehicle, pa rtic ularly o n a heav ie r
one. The jack is only suitable for u se on the
vehicle it came wit h.
Emergen cy a ssis tanc e
Equipment
Vehicle tool kit
Fig. 151 Lu gg age compartmen t: cargo floo r cove r fo lded
u pwa rd
T he veh icle tool k it is located in the luggage com­
partment under the cargo floor cover.
.. Push on the p lastic handle and lift up the cargo
floor .
.. Open the cargo floor.
Completely retract the veh icle jack a rm before
stor ing the ve hicle jack*.
_& WARNING
- Never use the screw driver hex head to
tighten wheel bo lts, since the bolts cannot
attain the necessary tightening torque if yo u
use the hex head, potentially causing an ac­
cident.
- The factory-supp lied jack is intended only
for your ve hicle model. Under no circum­
stances shou ld it be used to lift heavy
veh icles or other loads; you risk injuring
yourse lf.
- Never start the engine when the ve hicle is
raised, which could cause an accident.
- Support the vehicle securely with appropri­
ate stands if wo rk is to be performed under­
neath the vehicle; otherwise, there is a po­
tential risk fo r injury .
@ Tips
The vehicle jack * in your vehicle is mainte­
nance-free.
197

Emergency assistance
Loosening and tightening the wheel bolts
The wheel bolts must be loosened before raising
the vehicle.
Fig. 1 55 Changing a w heel : loosening the w hee l bo lts
Loosening
• Inst all the wheel bolt wrench ove r th e whee l
bolt and push it down as far as i t will go.
• Take tight hold of the
end of the wrench handle
and turn t he whee l bolts
counter-clockwise
about one single turn in the d irection of arrow
q fig . 155.
Tightening
• Install the wheel bolt wrench over the whee l
bolt and push it down as far as it will go.
• Take tight hold of the
end of the wrench handle
and turn each whee l bolt
clockw ise until it is
seated.
A WARNING
- Do not use force or hurry when changing a
wheel· you can ca use the vehicle to sl ip off
t h e jack and cause s erious pe rsonal injur ies.
- Do not loosen the whee l bolts mo re than
one turn
before you ra ise th e vehicle with
t h e ja ck .· You risk an i njur y.
(O} Tips
-Neve r use the he xagonal socket i n the han­
dle of the screwd river to loosen or tighten
th e w heel bo lts.
- If a wh ee l bolt is very t ight, you may fi nd it
eas ier to loosen by carefully push ing down
on th e end of th e wh eel bo lt wren ch wi th
one
fo ot on ly. As you do so, hold on to t he
200
car to keep yo ur ba lance and ta ke c are not
to slip.
Raising the vehicle
T he vehicle must be lifted wit h the jack first be ­
fore the wheel can be removed .
Fig. 156 S ill pa nels: mark in gs
Fig . 157 S ill : pos it io nin g the ve hicle jack
The location of the jack po int is indicated by an
i ndenta tion o n the underside of the veh icle
q fig . 15 6.
• Activate the parking brake to prevent the vehi­
cle from rolling uninte ntionally .
• Mov e the se lector lever to the P pos it ion .
• Find the
marking (imp rint) on the s ill that is
nea res t the w heel th at will be ch anged
¢ fig. 156 . Beh ind t he marking, there is a lift­
ing point on t he sill fo r the ve hicle jack .
• Tur n the
vehicle jack located un der the liftin g
point o n the sill to raise the jack until the jaw
¢ fig . 157 @covers the notch on the veh icle
¢ ,& , ¢(D .
• Align the vehicle jack so the jaw@ cove rs the
no tch and the base pla te ® is fla t on t he f loor .
Th e base p late @ must be
vertical unde r the
lif ting poin t@ . ..,_

Fuses and bulbs
(D Tips
- The following table does not list fuse loca­
tions that are not used.
- Some of the equipment listed in the follow­
ing tables applies only to certain model ver­
sions or certain optional equipment.
Cockpit fuse assignment
The fuse number is stamped into the plastic be­
low or above each fuse.
No. Equipment
1 LED headlight (left)
2 LED headlight ( right)
5 LED headlight (left)
6 LED headlight (right)
7 Steering lock
8 Convenience access contro l module
9
Airbag control module, AIRBAG OFF indi-
cator light
12
Transmission control module, selector
mechanism
Air quality sensor for cl imate control sys-
tern, heated w indow washer nozzles ,
lj]
button, reverse light button<®>, oi l level
13 sensor, climate contro l system, seat occu-
pant detection system, seat heating, but-
tons in the center console, automatic dim-
ming mirror
Engine control module, quattro control
modu le, transmission control module,
14
brake lights, electromechanica l steering,
Gateway control module, trai ler hitch con-
trol module, ESC contro l module, light
switch, damping control module
Headlight range control module , instru-
ment illumination, headlights (left, right),
15 diagnostic connector, crankcase housing
heater, a ir flow sensor, socket relay, DC/
DC converter
16 Park ing aid
17 Parking system rearview camera
18 TV tuner
19 Engine starter control, DC/DC converter
206
No . Equipment
20
ESC contro l module, climate/heating con-
trol, special functions interface
21 Selector mechanism power supply
22 Interior monitoring
© button, front interior lighting buttons,
23 diagnostic connector, light switch, light/
rain sensor, humidity sensor
25 Headlight power supply
26 Rear window wiper
27 Starter system
28 Infotainment system
29
Supply for the parking system rearv iew
camera and TV tuner
30 Infotainment system
31 Infotainment system
32 Instrument cluster
33 A utomat ic dimming rearview mirror
36
Cigarette lighter, cockpit/luggage com-
partment socket
37 Cockpit/rear socket
38 Transmission control module
40 Trailer hitch control module
41 Tra iler hitch control module
42 Trailer hitch control module
44 Rear window defogger
45
Electromechanical parking brake control
module
46 Trailer hitch control module
47 quattro control module
48 Aut omat ic lu ggage compartment lid con-
tro l module
so Blower
51
Electromechanical parking brake control
module
52 BCM
53 Fr ont seat heating
54 Panorama roof
SS Sun shade on the panorama
roof
56 Adaptive dampers control module

00
00
......
"' ,....
"' ...... 0 0 :::,
00
Belt tensioners . . . . . . . . . . . . . . . . . . . . . . . 115
Blended gasoline . . . . . . . . . . . . . . . . . . . . . 155
Blower
automatic Climate control system . . . . . . .
57
Manual climate control system . . . . . . . . . . 54
Booster seats . . . . . . . . . . . . . . . . . . . . . . . . 145
Brake fluid
Checking the brake fluid level . . . . . . . . . .
168
Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Brake booster . . . . . . . . . . . . . . . . . . . . . . . . 94
Brake fluid . . . . . . . . . . . . . . . . . . . . . . . . . 168
Electromechanical parking brake . . . . . . . . 64
Indicator light . . . . . . . . . . . . . . . . . . . . . . . 16
New brake pads . . . . . . . . . . . . . . . . . . . . . . 94
Braking
Brake assist . . . . . . . . . . . . . . . . . . . . . . . . .
92
Emergency braking function . . . . . . . . . . . . 65
Indicator light . . . . . . . . . . . . . . . . . . . . . . . 12
Worn brake pads . . . . . . . . . . . . . . . . . . . . . 15
Breaking in
New engine . . . . . . . . . . . . . . . . . . . . . . . . .
58
New tires . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
C
California Proposition 65 Warning . . . . . . . 160
Battery specific . . . . . . . . . . . . . . . . . . . . . 168
Capacities
Fueltank . .. .. ............... .. .. .. .
216
Washer fluid reservoir ............... . 216
Caps for wheel bolts, removing . . . . . . . . . . 199
Ca re . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Cargo area
refer to Loading the luggage compart-
ment. ... .. .. ................ ..... .
105
Cargo floor ......... ....... ...... ... .. 51
Catalytic converter . . . . . . . . . . . . . . . . . . . . 158
Center armrest . . . . . . . . . . . . . . . . . . . . . . . . 45
Central locking . . . . . . . . . . . . . . . . . . . . . . . . 23
Central locking switch . . . . . . . . . . . . . . . . . 27
Convenience key . . . . . . . . . . . . . . . . . . . . . . 26
Em ergency locking . . . . . . . . . . . . . . . . . . . . 28
Luggage compartment lid . . . . . . . . . . . . . . 28
Panorama roof . . . . . . . . . . . . . . . . . . . . . . . 32
Power windows . . . . . . . . . . . . . . . . . . . . . . 32
Index
Remote control key . . . . . . . . . . . . . . . . . . . 25
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Certification . . . . . . . . . . . . . . . . . . . . . . . . . 221
Changing engine oil . . . . . . . . . . . . . . . . . . . 165
Child restraints
Danger of using child restraints in the front
seat....... ... .. .. .................
118
Where can I get additional information
about child restraints and their use? . . . .
154
Child restraints system anchors......... . 150
Child safety . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Important safety instructions for using child
safety seats . . . . . . . . . . . . . . . . . . . . . . . .
140
Important things to know when driving with
children . . . . . . . . . . . . . . . . . . . . . . . . . . .
137
Installing a child restraint using the LATCH
system . . . . . . . . . . . . . . . . . . . . . . . . . . . .
151
Mounting and releasing the anchorage
hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
151
Tether anchors . . . . . . . . . . . . . . . . . . . . . . 152
Tether straps .. .. .. ................. 152
Child safety lock
Power windows . . . . . . . . . . . . . . . . . . .
31, 32
Rear doors . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Child safety seats
Booster seats . . . . . . . . . . . . . . . . . . . . . . .
145
Convertible child seats . . . . . . . . . . . . . . . 144
Convertible locking retractor . . . . . . . . . . 149
Danger of using child restraints in the front
seat ...... .... .. .. ............... ..
118
How do I properly install a child safety seat
. h. l 7 140 rn my ve 1c e ..... .. ... ........... .. .
Infant seats . . . . . . . . . . . . . . . . . . . . . . . .
143
LATCHsystem . .. .. ............... .. 151
Lower anchorages . . . . . . . . . . . . . . . . . . . 151
Safety instructions . . . . . . . . . . . . . . . . . . . 140
Unused safety be lts on the rear seat . . . . 142
Child seats . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Securing . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Cleaning ... .... .. .. ............... .. 191
Cleaning/removing ice from windows . . . . . 193
Cleaning Alcantara . . . . . . . . . . . . . . . . . . . . 194
Cleaning artificial leather . . . . . . . . . . . . . . . 194
Cleaning carbon parts . . . . . . . . . . . . . 193, 194
Cleaning controls . . . . . . . . . . . . . . . . . . . . . 193
Cleaning decorative parts and trim . . . 192, 193
Cleaning exhaust tail pipes . . . . . . . . . . . . . 192
223