four AUDI Q5 2008 1.G Infotainment MMI Operating Manual

Media drives17
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Disconnecting the iPod connector
– Release the connector by pressing both knobs

page 16, fig. 9.
– Carefully pull the connector out of the iPod .
When it is connected, the iPod can be put away in the storage bay

page 15, fig. 5.
The iPod battery is charged via the adapter cable when the iPod is
connected to the Audi music interface and the ignition is switched
on.
The following iPods can be connected to the iPod adapter cable:
•iPod Mini (versions 1.3.0, 1.4.0 and 1.4.1)
•iPod nano 1G - First Generation (versions 1.1, 1.1.1 and 1.3)
•iPod 5G - Fifth Generation Video (version 1.1.2)
•iPod 4G - Fourth Generation (version 3.1.1)
Other versions cannot be used with the iPod adapter cable. You can
connect these devices as portable players using the optional
adapter cable with 3.5 mm jack plug*
page 18.
Any problems with the iPod will also affect the operation of the MMI.
In this case, please reset your iPod (see operating instructions)
The following iPod control functions are not supported by the MMI:
•Star rating for music tracks
•Jump to a specific place in a track
•Add tracks to the “on-the-go” playlist
•Display the “compilations” folder. Similarly, tracks marked “part
of a compilation” are not included in the artist list if the compilation
function was activated in the iPod.
Note
•For more information on operating the iPod via the MMI, please
refer to the sections starting on
page 63.
•Please refer to the iPod operating instructions for important
information on how to use your iPod.
•We recommend that you update the iPod software to the latest
status.
•Your Audi dealership will be able to provide the latest informa-
tion on the Audi music interface.
Applies to vehicles: with Audi music interface and USB/mini USB adapter cable - under
development at the time of printing
Connecting a portable player via a USB/mini
USB adapter cable
Different USB memory devices can be connected to the
Audi music interface via a USB/mini USB adapter cable.
When connected, the memory devices can be put away in the
storage bay
page 15, fig. 5.
The Audi music interface supports USB memory devices belonging
to the “USB Device Subclass 1, 2 and 6”. The manufacturer will
provide you with information on the “USB Device Subclass” of a USB
memory device.
The following USB memory devices are supported:
•USB sticks
•Single card readers
•Multiple card readers (first card slot used)
•USB MP3 players that do not require special driver software
•External USB flash memory
•External USB hard drives (HDD) - 1", 1.8", 2.5" drives with a max.
starting/continuous current of 800 mA
For information on how to operate the USB memory device via the
MMI, please refer to sections starting on
page 63.
MP3/ WMA files must meet the following specifications:
A1
A2










Phone pre-installation 22
Applies to vehicles: with phone pre-installation
Bluetooth™
Bluetooth enables a wireless connection between a
mobile phone and the MMI system.
The mobile phone 3) must be bonded to the on-board phone
system in the vehicle (only has to be done once). This proce-
dure involves various steps, depending on the mobile
phone you are using. After you switch on the ignition, you
have 5 minutes to connect your mobile phone to the on-
board phone system (while the vehicle is stationary).
– Make sure that no other mobile phone is connected to
the on-board phone system via Bluetooth.
– Switch on the ignition and the MMI (if not already acti-
vated).
– Select the appropriate menu option on your mobile
phone to search for Bluetooth compatible devices
(phone pre-installation).– Connect the mobile phone to the on-board phone
system. Your on-board phone system will use the name
“Audi UHV” when it connects with the mobile phone.
– Enter the PIN for handsfree mode (“1234”) on the on-
board phone system within 30 seconds.
– Wait until your mobile phone indicates that it has
bonded. The Bluetooth symbol
fig. 14 will appear
on the MMI display.
You should change the PIN for handsfree mode to prevent unauthor-
ised use of your mobile phone
page 101.
Up to four mobile phones
You can bond up to four mobile phones to the on-board phone
system. However, it is only possible to activate one connection at a
time. If you bond a fifth mobile phone to the on-board phone
system, the system will delete the device which has not been used
for the longest time in conjunction with the on-board phone system.
Connecting and disconnecting
A mobile phone which has been bonded to the on-board phone
system and is ready to operate will be connected automatically
when you switch on the ignition. On some mobile phones you have
to confirm the connection.
The Bluetooth connection is terminated when the key is removed
from the ignition lock.
Range
The Bluetooth connection between the mobile phone and the on-
board phone system is restricted to the interior of the vehicle. The
connection can be susceptible to interference caused by other elec-
tronic devices or obstacles between the devices. For example, the
transmission quality may be affected if you keep your mobile phone
in your jacket pocket.
3)Please make sure that the mobile phone you are bonding supports the
Hands-Free Profile.
Fig. 14 Bluetooth
symbol
A1












Phone pre-installation23
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Note
•If you use mobile phones in the vehicle this can generate electro-
magnetic fields.
−For this reason, you should always operate mobile phones
with an external aerial. This also applies to mobile phones used
in Bluetooth mode. The external aerial directs the electromag-
netic fields to the exterior, which reduces the field strength in the
vehicle interior.
−If retrofitting an external aerial, please ensure that it is
installed correctly.
•For more information on how to bond your mobile phone, please
refer to the mobile phone operating instructions.
•For up-to-date information on the phone pre-installation, please
ask an Audi dealer or specialist retailer.
Applies to vehicles: with phone pre-installation
Phone book entries
The phone book entries on your SIM card and your mobile
phone directory are automatically stored in the on-board
phone system.
Loading the phone book entries
The phone book entries will be loaded into the on-board phone
system automatically when you switch on the ignition (if the mobile
phone supports this function). It may take several minutes to load
the entries, depending on how many entries are stored on the
mobile phone.
The last four phone books loaded into the on-board phone system
remain stored there. When you link a fifth mobile phone to the on-
board phone system, the phone book from the mobile phone which
has not been used for the longest time is deleted from the on-board
system. Up to 1000 phone book entries per phone book can be
stored in the memory.
Using the mobile phone again later
If the SIM card is identical, the phone book entries are already
stored in the on-board phone system. You can use the phone book
almost immediately.
The system automatically checks the phone book entries in the
background and will update the memory if the entries have
changed.
Displaying the phone book entries
The phone book entries are displayed in alphabetical order together
with a category symbol
fig. 15, e.g. SIM card, private, business,
mobile phone or telephone symbol.
Note
•Which phone book entries are displayed on the MMI will depend
on the mobile phone you are using.
•In certain cases, phone book entries from a mobile phone may
not be transmitted in alphabetical order. If more than 1000 phone
book entries exist, entries with certain initial letters may not appear
on the MMI.
Fig. 15 Finding an
entry in the phone
book











Bluetooth car telephone kit25
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control −To lessen the risk of interference you should use the ear
opposite to the pacemaker.
−Never carry the handset* in a chest pocket.
−If you suspect interference, switch the handset* off immedi-
ately.
•The handset* may interfere with the function of hearing aids in
certain circumstances. If necessary, contact the manufacturer of
your hearing aid to find an alternative solution.
•If you use other health related devices, please contact the
manufacturer before using the handset* to find out if the device is
adequately protected against radiation.
•Airbags are released with extreme force. Never place the
handset* within the area of inflation of an airbag. You will put
yourself and others at risk.
•When using the telephone, please note
page 9, “Notes on
traffic safety”.
Caution
•Please heed laws regulating the use of telephones in vehicles.
•You must switch off the telephone system in areas where the use
of mobile telephones is prohibited. Please observe all relevant
caution notices and regulations.
•Switch off the car telephone kit
page 26, the handset*

page 140 and any other mobile phones in all areas where there
may be a risk of explosion. Remember that these areas may not
always be adequately marked. Such places are filling stations, fuel
and chemical storage facilities or transport vehicles and other
places where fumes, chemicals (e.g. from leaking propane or fuel
vapours in vehicles or buildings) or large quantities of dust particles
(e.g. from flour, wood or metal) could accumulate in the air. This
warning also applies to all other places where you would normally
switch off your engine.
•The car telephone kit and handset may be installed, serviced and
repaired only by an Audi workshop or other qualified workshop.
Note
•If you use mobile phones in the vehicle this can generate electro-
magnetic fields.
−For this reason, you should always operate mobile phones
with an external aerial. This also applies to mobile phones used
in Bluetooth mode. The external aerial directs the electromag-
netic fields to the exterior, which reduces the field strength in the
vehicle interior.
−If retrofitting an external aerial, please ensure that it is
installed correctly.
Setting up
Applies to vehicles: with Bluetooth car telephone kit
Introduction
Range of a Bluetooth connection
The maximum range of the Bluetooth connection is limited to the
interior of the vehicle. The connection can be susceptible to inter-
ference caused by obstacles or other electronic devices.
Bonding Bluetooth devices
No other mobile phone may be connected to the car telephone kit
during the bonding process. Before bonding a mobile phone, make
sure it is not connected to any other Bluetooth device (such as a
notebook computer or headset, etc.). Watch the display on your
mobile phone and follow any instructions.
You can bond up to four mobile phones to the car telephone kit,
however only one connection is active at a time. If you bond a fifth
mobile phone to the car telephone kit, the system will cancel the
WARNING (continued)











Bluetooth car telephone kit29
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Enter the PIN for handsfree mode on the mobile phone
within about 30 seconds. The factory default for the PIN
for handsfree mode is 1234. A mobile phone symbol

page 28, fig. 20 will appear in the status line of the
MMI display when the mobile phone has successfully
bonded.
The external car aerial is not used. The handset* cannot be used.
Note
•Audi does not recommend using a mobile telephone with Hands-
Free Profile.
•You should change the PIN for handsfree mode to prevent other
users from connecting to your car telephone kit
page 96.
•For up-to-date information on mobile phones with the Hands-
Free Profile, please ask an Audi dealer or specialist retailer.
Applies to vehicles: with Bluetooth car telephone kit
Phone book entries
The phone book entries on your SIM card and your mobile
phone directory are automatically stored on the MMI
system.
Loading the phone book entries
The phone book entries will be loaded into the MMI automatically
when you switch on the ignition (if the mobile phone supports this
function). It may take several minutes to load the entries, depending
on how many entries are stored on the mobile phone.
The last four phone books loaded into the MMI memory remain
stored there. When you link a fifth mobile phone to the car tele-
phone kit, the phone book from the mobile phone which has not
been used for the longest time is deleted from the MMI. Up to 1255
phone book entries per phone book can be stored in the memory.
Reconnecting a mobile phone
If the SIM card is the same as before, the phone book will appear on
the MMI after a short time.
The MMI automatically checks the phone book entries in the back-
ground and will update the memory if the entries have changed.
Displaying the phone book entries
The phone book entries are displayed in alphabetical order together
with a category symbol
fig. 21, e.g. SIM card, private, business,
mobile phone or telephone symbol.
Note
•Which phone book entries are displayed on the MMI will depend
on the mobile phone you are using.
•If the SIM card is in the handset
page 31, only the SIM card
entries will be displayed.
•In certain cases, phone book entries from a mobile phone may
not be transmitted in alphabetical order. If there are too many
phone book entries, entries with certain initial letters may not be
displayed on the MMI system.
A1
Fig. 21 Phone book
entries











Basic operation41
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
How to use the controls
You can operate the functions of the MMI system by
pressing and turning the buttons on the MMI control
console.
Fig. 29 Buttons on MMI control console
Function selector buttons
Press one of the function selector buttons to activate the function
shown on the button. For example, simply press the button
to switch the system to the radio mode.
Use the button to call up additional settings for the current
function. Rotary pushbutton
To select a menu option in the MMI display, turn the rotary push-
button in the required direction and then press it.
Control buttons
To activate a function indicated in one of the four corners of the
display, press the corresponding control button for that corner of
the display. For instance, the top right control button corresponds
with the top right corner of the display
fig. 29.
RETURN button
Press the button to cancel an entry that has not yet been
confirmed or to return to the previous menu level.
Arrow buttons
Press the or button to go to the next or go back to the previous
radio station or TV* channel in the list.
Press the button to select the next track of a CD or iPod
5) (if an
iPod is being used). Press the button within the first ten seconds
of a track to go back to the previous track. After the first ten seconds,
you can press this button to go back to the start of the track that is
currently playing.
When in the CD, MP3 or interface mode, press and hold the
button to activate the fast reverse function, or press the button to
activate the fast forward function.
A1
RADIO
SETUP
5)Still under development at the time of printing.
A2
A3
A4
RETURN
A5
<>
><
<>










Listening to the radio53
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Listening to the radio
Introduction
The radio has four wavebands: FM, MW, LW and DAB* (digital radio).
The stations which are currently within reception range are
displayed in a station list and can be selected. Of course you can
tune the radio to the next available station or scan all stations via
the MMI control console. You can store your favourite stations in
any order on a memory list.
FM (very high frequency)
The FM station list (max. 30 stations) is updated automatically. You
can set the station list to display the five radio stations that you listen to most frequently at the top of the station list. Other available
stations will appear further down the list
fig. 43.
Radio stations that appear in grey lettering cannot be selected as
they are not within reception range.
Medium and long wave (MW/LW band)
The MW and LW station lists (max. 30 stations) must be updated
manually
page 54, fig. 46.
When you leave the range of reception the stations in the station
lists will still be displayed, but the reception will be poor.
Digital radio* (DAB frequency)
If you are listening to “Digital Audio Broadcasting”* the station list
shows so-called ensembles. Ensembles cover a specific area (e.g. a
city or region) and comprise various radio stations. The frequency
range can be restricted to regional ensembles
page 62.
The station list (max. 60 stations) must be updated manually. This
may take some time.
If you leave the range of reception, ensembles or radio stations
which can no longer be received are marked with the symbol

fig. 44. The symbol disappears as soon as the ensemble or radio
station can be received again.
If the MMI has been switched off for more than ten minutes (ignition
key removed), the last five ensembles that you listened to will auto-
matically be checked for reception when the MMI is switched back
on. Any ensembles that are no longer available will not appear in the
station list.
Fig. 43 FM station list
Fig. 44 DAB station list
showing stations no
longer receivedA1





 




Listening to the radio 54
Activating radio mode
Important: The MMI system must be switched on

page 40.
– Press the function selector button marked . The
Last stations menu
fig. 45, the station list or the radio
menu that was last activated will appear on the MMI
display.
The menu that was active when you were last listening to the radio
will appear on the MMI display. Call up the Station list menu by
pressing the function selector button again (while in radio
mode). If the option Last stations is activated
page 60, the five
stations that you listen to most frequently will be displayed in the FM station list. Other available stations will appear further down the
list.
Setting the waveband
The MMI system has four wavebands: FM (very high
frequency), medium wave (MW), long wave (LW) and
digital radio*.
Important: Radio mode must be activated
page 54.
– Press the control button for Waveband.
– Turn the rotary pushbutton to mark the waveband you
wish to select.
– Press the rotary pushbutton to select the waveband. The
current waveband will then appear in the heading of the
MMI display.
Note
The waveband can be set just as easily on the multi-function
steering wheel
page 129.
Fig. 45 Last stations
on FM station list
displaying radio
stations
Fig. 46 Station list for
MW frequency band
RADIO
RADIO
Fig. 47 Wavebands










Using the telephone 98
•off - a number is not redialled automatically if the line is
engaged.
Auto call answer
•on - an incoming call is answered automatically shortly after it is
received.
•off - an incoming call is not answered automatically.
Note
The call options depend on your mobile network service provider.
Applies to vehicles: with Bluetooth car telephone kit
Security settings
– Select: Function selector button > function selector
button > Security settings.
Automatic PIN recognition
•on - to save the PIN code of the SIM card the first time you enter
it on the MMI. In this case, you don't have to enter the PIN code
every time your mobile phone reconnects via Bluetooth. You can
save the PIN codes of four different SIM cards on the MMI.
•off - to delete all PIN numbers already stored on the MMI.
PIN query
•Activate PIN query - the telephone system asks for the PIN every
time you switch it on. If Automatic PIN recognition is activated, the
system does not ask you to enter the PIN explicitly.
•Deactivate PIN query - the telephone system does not ask for the
PIN when you switch it on. The Automatic PIN recognition setting is
ignored in this case. Some SIM cards do not allow the PIN query to
be deactivated.Changing PIN code
First enter the existing PIN code for your SIM card. The PIN can only
consist of numbers from 0 to 9. The new PIN has to be entered twice,
as a precautionary measure, and is stored on the SIM card.
If you change the PIN when the SIM card is in a connected mobile
phone with SIM Access Profile, you will have to enter the PIN again
on the mobile phone after the Bluetooth connection between the
car telephone kit and the mobile phone is terminated. Otherwise
you will not be available.
Call barring
The call barring function requires a password. You can obtain the
password from your mobile network service provider.
•Bar outgoing calls - to set up access restrictions for outbound
calls.
•Bar incoming calls - to set up access restrictions for inbound
calls.
•Deactivate call barring (all) - to cancel all restricted access
settings.
Note
The call barring options depend on your mobile network service
provider.
Applies to vehicles: with Bluetooth car telephone kit
Mailbox number
– Select: Function selector button > function selector
button > Mailbox number.
Enter the mailbox number using the speller and select OK to store it.
To delete the mailbox number, select Del in the speller and confirm
with OK.
TEL
SETUP
TEL
SETUP










Navigation111
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control You can exit the legend menu by pressing .
Orientation. The map is displayed either facing north or facing
the direction of travel
page 118. If you select the orientation
option in the activated legend menu and press the rotary push-
button, the orientation switches from the direction of travel to
the direction facing north and vice versa. This setting is not
stored.
Scale. Turn the rotary pushbutton clockwise/anti-clockwise to
zoom in or out. You can also change the scale via the activated
legend menu. The setting that was last activated is stored.
Distance to the destination
Estimated time of arrival
Examples of selected map contents
Depiction of motorway exits on a scale of 50 m to 500 m. On a
scale of 750 m to 8 km the exits are displayed as dots.
Location of the vehicle
Destination control button. To switch to entry space

page 105, fig. 91 or the route plan
page 108, fig. 96.
If you use the crosshairs to select map contents, any existing
information on the contents (e.g. address, phone number) will
be displayed. If you select a traffic jam symbol and press the
rotary pushbutton, the corresponding TMC traffic report will be
displayed. On a scale of 1 km upwards, the map contents will
not be displayed.
Display of position coordinates of the crosshairs (longitude and
latitude).
Map position menu. The point on the map selected with the
crosshairs can be set as a destination or stopover, stored in the
directory and called up on the telephone
page 109.
The crosshairs can be moved horizontally and vertically by
turning and pressing the rotary pushbutton. Press the rotary
pushbutton to switch between the horizontal and vertical cross-
hair bars or deactivate this option. Using this option, you can,
for example, select a new destination
page 109.Moving along the route. This function can be used while route
guidance is activated. Turn the rotary pushbutton clock-
wise/anti-clockwise to move the map along the current route.
Altitude display
Note
Did you know that you can choose from four different map types

page 118?
Applies to vehicles: with navigation system
In the driver information system
RETURN
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
Fig. 101 Display when
a lane change is
required
Fig. 102 Display when
a turn-off is required