belt AUDI Q5 2013 Owners Manual

Trailer hitch . ..... .... ... .. .. .. . .
Error messages
Homelink ® ... .. .... ... .. .. .. . .
Universal remote control ... .. .. .. . . 134
134
135
135
S afet y fir st . . . . . . . . . . . . . . . . . . . . 139
Dri ving Safely . . . . . . . . . . . . . . . . . 139
Gene ral notes ..... .... ... .. .. .. . .
Proper occupant seating posit ions . . .
Pedal area .. .. ............. .. .. . .
Stowing luggage ................ .
Report ing Safety Defects .......... .
Safety belts .................. .
General notes ................... .
Why safety belts? ............... .
Safety belts ..... .. ... ... .. .. .. . .
Safety bel t pretens ioners ......... .
Airbag sy stem .......... ...... .
Important things to know ......... .
Fr ont airbags ............ .... .. . .
M on itoring the A dvanced Airbag
System .... .. ... .. ..... ... .. .. . .
Side airbags . ... ...... ... .. .. .. . .
Side curtain airbags .... ... .. .. .. . .
Child Safety .. .. .... ... .. .. .. . .
Important things to know . ... .. .. . .
Ch ild safety seats ................ .
Instal ling a child safety seat .. .. .. . .
LATC H Lower anchorages and tethers
for chi ldren .... .. .. ... ... .. .. .. . .
Addit ional Information 139
140
144
145
146
149 149
150
152
155
157
157
16 1
168
172
175
178
178
184
188
191
196
Vehicle operation . . . . . . . . . . . . . 197
Intelligent technology . . . . . . . . 197
Not ice about data recorded by vehi cle
con trol mod ules . . . . . . . . . . . . . . . . . . 197
E lect ronic S tabiliz ation Control ( ESC) . 19 7
Brake system . . . . . . . . . . . . . . . . . . . . 200
Elect romechanical power assist,
Dynamic stee ring . . . . . . . . . . . . . . . . . 201
Driving w ith your quattro ® . . . . . . . . . 202
Energy management . . . . . . . . . . . . . . 203
Table of contents 3
Driving and environment . . . . .
205
The first 1,000 miles (1,500 km) and
afterwa rds . . . . . . . . . . . . . . . . . . . . . . 205
Catalytic converter . . . . . . . . . . . . . . . . 206
Avoid damaging the vehicle . . . . . . . . . 206
Operate your vehicle economically and
min imize pollut ion . . . . . . . . . . . . . . . . 207
Driving off road . . . . . . . . . . . . . . . 209
Drivi ng in difficult road conditions and
offroad . . . . . . . . . . . . . . . . . . . . . . . . . 209
Trailer towing . . . . . . . . . . . . . . . . . 212
D riving with a trailer . . . . . . . . . . . . . . 212
T rai le rtow ingtips ... .. .. ..... .... 214
Vehicle care . . . . . . . . . . . . . . . . . . . 216
Cleaning and protection . . . . . . 216
General infor mation . . . . . . . . . . . . . . 216
Care of ex ter ior . . . . . . . . . . . . . . . . . . 216
Care of interior . . . . . . . . . . . . . . . . . . . 223
Fuel supply and filling your
fuel tank . . . . . . . . . . . . . . . . . . . . . . .
228
Gasoline . . . . . . . . . . . . . . . . . . . . . . . . 228
F uel tank. . . . . . . . . . . . . . . . . . . . . . . . 230
Checking and filling . . . . . . . . . . . 233
Engine hood . . . . . . . . . . . . . . . . . . . . . 233
Engine compartment . . . . . . . . . . . . . . 235
Engine oil . . . . . . . . . . . . . . . . . . . . . . . 235
Engine cooling system . . . . . . . . . . . . . 240
Brake fluid . . . . . . . . . . . . . . . . . . . . . . 242
Battery . . . . . . . . . . . . . . . . . . . . . . . . . 243
Windsh ield/headlight washer
containe r . . . . . . . . . . . . . . . . . . . . . . . 24 7
Tires and wheels . . . . . . . . . . . . . . 248
T ires . . . . . . . . . . . . . . . . . . . . . . . . . . . 248
T ire pressu re mo nitoring system 266
Do-it-your self service . . . . . . . . . 269
What do I do now? . . . . . . . . . . . . 269
Jack , tools and inflatab le sp are tire . . 269
T ire repa ir . . . . . . . . . . . . . . . . . . . . . . . 272
Changing a wheel ... . .. .. ..... ... . 274
•
•

14 Instruments and warning/indicator lights
Warning/indicator lights
Overview
The warning/indicator lights indicate differen t func tions or a pos sible malfunction .
Fig. 8 In st rume nt cl us ter with wa rning /in dicato r ligh ts
Your veh icle is equipped with seve ral impor­
tant warning and indicator lights to help you monito r the continued reliable operat ion of
your veh icle
¢ .&. .
Et·ff
Electromechanical steering, Dy -
namic steering*
¢ page 201
[m
Electronic power control
¢page 15
Bl
Electronic Stabilization Control
( E SC)
qpage 15
•
Electronic Stabilization Control
(ESC)
¢page 15
fl
USA models: Safety systems
qpage 15 •
El
Canada models: Safety systems
qpage 15
[I]
Tire pressure monitoring sys-
tern*
qpage 16
...
----
II
Left turn signal
r:!) page 16
•
•
11
I
'
I
I I ~ I
•
Trailer turn signal assembly*
~page 16
Safety belt
¢page 16
Malfunction Indicator Lamp
(MIL)
¢ page 16
High beam
¢page 17
Right turn signal
¢page 16
USA models: Cruise control acti-
vated
¢ page 17
Canada models: Cruise control
activated
¢ page 17
USA models: Anti-lock brake
system (ABS) defective
¢ page 17
Canada models: Anti-lock brake
system (ABS) defective
¢page 17
j

16 Instrum ent s and w arn ing /indic ato r light s
blink, then there is a ma lfunction somewhere
in the system.
If the light does not illuminate
when you switch the ignition on, this also
means there is a malfunction.
A WARNING
If you have a malfunction in the safety sys­
tems, contact your author ized Audi dealer
immediately. Otherw ise the safety sys­
tems may not work properly in an acci­
dent.
U) Tire pressure monitoring system -
telltale indicator lamp
Appl ies to vehicles: with tire pressure monitoring system
The warning/indicator light appears in the
event of a significant loss of tire pressure or if there is a malfunction.
The indicator light IE illuminates to check
the function when you switch on the ignition.
If the
IE symbol remains on or blinks after
you switch on the ignition, the re is a loss of
tire pressure or a system malfunction.
If there
is a system malfunction, see your authorized
Aud i dealer as soon as possible.
Detai led information on the tire pressure
mon itoring system can be fou nd in
¢page 266.
¢ Q Turn signals
The indicator light blinks when you use either
turn signal.
Whenever you use the left B or the right II
turn signal, the ind icator light blinks. When
you use the emergency flashers, both indica­ tor lights flas h.
If one of the turn s ignal light bulbs burn out,
the turn signa l wi ll blink tw ice as fast as nor­
mal.
This does not apply, however, in towing mode.
The indicator light does no t flash if a turn s ig­
nal is out on the trailer or the tow ing vehicle.
Addit ional info rmation on the turn sig nals
¢page 52.
~,1 ¢ Trailer turn signal assembly
Applies to vehicles: with towing hitch
The indicator light also blinks if the turn sig­
nal is operated when towing a trailer.
The ind icator light. bli nks when the turn
s ignal is used, if a trailer has been properly
con nected to the vehicle .
If one of the turn signa l bulbs on the trailer is
burned out or defective, the ind icator light
will not blink when you use the turn signals.
(D Tips
For vehicles with a factory installed towing
hitch or a trailer hitch that was installed
l ater according to factory spec ificat ions,
the trailer turn signal assembly is actuat­
ed.
,(t Safety belts
This warning/indicator light reminds you to
put on your safety belt.
The . warn ing/ indicator light illum inates
when the ignition is switched on to remind
the driver and (o n USA models only) any front
passenger to put on the safety be lt . Addit ion­
ally, an audib le warn ing tone w ill also sound .
For more Informat ion
¢ page 149, Safety
belt warning light.
o Malfunction Indicator Lamp (MIL )
The Ma lfunction Indicator Lamp (MIL) is part
of the On-Board Diagnos tic (OBD II) sys tem.
T he symbo l
(4 lights up when the ignition is
tu rned on and will turn off after the eng ine
has started and has settled at a constant idle
speed. This indicates that the MIL is working
properly.
The warning light ill uminates when the re is a
malfunction in the engine electronic system.
Contact your a uthorized Audi dea ler and have
the malfunction corrected. .,..

Seats and storage
General recommen­
dations
Why is your seat adjustment so important?
The safety belts and the airbag system can
only provide maximum protection if the front
seats are correctly adjusted.
There are various ways of adjusting the front
seats to provide safe and comfortable support
for the driver and the front passenger. Adjust
your seat properly so that :
- you can easily and quick ly reach all the
switches and controls in the instrument
panel
- your body is properly supported thus reduc­ ing physical stress and fatigue
- the safety belts and airbag system can offe r
maximum protection
¢ page 157.
In the following sections, you will see exactly
how you can best adjust your seats .
There are special regulations and instructions
for installing a child safety seat on the front passenger's seat. Always follow the informa­
tion regard ing child safety provided in
¢ page 178, Child Safety.
A WARNING
Incorrect seating position of the driver and
all other passengers can result in serious
personal injury.
- Always keep your feet on the f loor when
the vehicle is in motion -never p ut your
feet on top of the instrument panel, out
of the w indow or on top of the seat cush­
ion. Th is applies especially to the passen­
gers . If your seating position is incorrect,
you increase the r isk of injury in the case
of sudden braking or an acc ident. If the
airbag inflates and the seating position
is incorrect, this could result in persona l
injury or even death.
- It is important for bo th the driver and
front passenger to keep a distance of a t
Seat s an d sto rage 61
least 10 inches (25 cm) between them­
selves and the steering wheel and/or in­
strument panel. If you're s itting any
closer than th is, the airbag system can­
not protect you properly. In addition, the
front seats and head restraints must be
adjusted to your body height so that t hey
can give you maximum protect ion.
- Always try to keep as much distance as
possible between yourself and the s teer­
ing wheel o r instrument pane l.
- Do not adjust the driver's or front pas­
senger's seat whi le the vehicle is moving.
Your sea t may move unexpected ly, caus­
ing sudden loss of vehicle cont rol and
personal injury . If you adjust yo ur seat
while the veh icle is moving, yo u are out
of posit ion.
Driver's seat
The correct seat position is important for safe
and relaxed driving.
We recommend that you adjus t the dr iver's
seat in the fo llowing manner:
.,. Adjust t he seat in fore and aft direction so
that you can easily push the peda ls to the
floor wh ile keeping your knees s lightly bent
i:::> A in Why is your seat adjustment so im­
portant? on page 61.
.,. Adjust the seatback so that when you sit
w ith your back against the seatback, you can
still grasp the top of the steering wheel.
.,. Adjust the head restraint so the upper edge
is as even as possible with the top of your head . If that is not poss ible , try to adjust
the head res traint so that it is as close to
this pos ition as possib le
i:::> page 65.
A WARNING
Never place any objects in the dr iver's foot­
well. An object could get into the pedal
area and interfere with pedal funct ion . In
case of sudden braking or an acc ident, you
wo uld not be able to brake or accelerate.

62 Seats and storage
Front passenger's seat
Always move the front passenger seat into
the rearmost position.
To avoid contact with the airbag while it is de­
ploying, do not sit any closer to the instru­
ment panel than necessary and always wear
the three-point safety belt provided adjusted
correctly. We recommend that you adjust the
passenger's seat in the following manner:
• Move the front passenger seat into the rear­
most position of the fore and aft adjustment
range
q _& in Why is your seat adjustment
so important? on page 61.
• Bring the backrest up to an (almost) upright
position.
D o not ride with the seat reclined.
• Adjust the head restraint so the upper edge
is as even as possible with the top of your
head . If that is not possible, try to adjust
the head restraint so that it is as close to
this position as possible
c:> page 65.
• Place your feet on the floor in front of the
passenger's seat .
Front seats
Power seat adjustment
Fig. 61 Front seat: Controls for seat adjus tment
Controls
@· Adjusting the lumbar support: press the
button in the correspo nding position
q &.
@ · Moving the seat up/down: press the but­
ton up/down . To adjust the front seat cushion,
press the front button up/down. To adjust the
rear seat cushion, press the rear button up/
down ~& .
@-Moving the seat forward/back: press the
button forward/back
q & .
©-Adjusting the backrest angle : press the
button forward/back
q & .
@ -Lengthening/shortening the upper thigh
support*: lift the handle
q &.
_&. WARNING
-
-Never adjust the driver's or front pas­
senger's seat whi le the vehicle is moving.
If you do this while the vehicle is moving,
you will be out of position. Always adjust
the driver's or front passenger's seat
when the vehicle is not moving.
- Be careful when adjusting the seat
height. Check to see that no one is in the
way, or serious injury could result!
- Because the seats can be electrically ad­
justed with the ignition off or with the
ignition key removed, never leave chil­
dren unattended in the vehicle. Unsuper­
vised use of the electric seat adjust­ ments may cause serious injury.
- To reduce the risk of injury in the case of
sudden braking or accident, front pas­
sengers must never ride in a moving ve­
h icle with the backrest reclined. Safety
be lts and the airbag system only offer
maximum protection when the backrest
is upright and the safety belts are prop­
erly positioned on the body . The more
the backrest is reclined, the greater the
risk of personal injury from an incorrect
seating position and improperly posi­
tioned safety belts .

66 Seats and storage
Installing the outer head restraints
.,. Slide the posts on the head restraint down
into the guides until you feel the posts click
into place .
.,. Press the button@¢
fig. 66 and slide the
head restraint all the way down. You sho uld
not be able to pull the head restra int out of
the backrest .
Removing the center head re straint
.,. Move the head restraint upward as far as it
can go .
.,. Press the button@¢
fig. 66 and pull the
head restraint out of the backrest¢.,&. .
Installing the center head restraint .,. Slide the posts on the head restraint down
into the guides until you fee l the posts click
into place.
.,. Press the button@¢
fig. 66 and slide the
head restraint all the way down. You should
not be able to pull the head restraint out of
the backrest .
So that the driver can have a better view to
the rear, the head restraints should be pushed
down completely when the rear seats are not
occupied .
A WARNING
- Only remove the rear seat head restraints
when necessary in order to install a child
seat. Install the head restra int again im­
mediately once the child seat is removed.
Driving without head restraints or with
head restraints that are not properly ad ­
justed increases the r isk of serious or fa­
tal neck injury dramatically .
- Read and heed all WARNINGS
¢page 142.
(l} Tips
Correctly adjusted head restraints and
safety belts are an extremely effective
comb inat ion of safety features.
Center armrest
The armrest is adjustable in several stages
and can be moved forward and back.
Fig . 68 Armrest betwee n driver 's and passenger's seat
Adjusting the armrest
.,. To adjust the armrest angle, pivot the arm ­
rest fully down .
.,. Lift the armrest detent by detent until the
desi red position is reached .
Moving the armrest
.,. You can move the armrest forward or back
¢fig. 68 .
There is a storage compartment under the
armrest.

Luggage compartment
Expanding the passenger compartment
The rear seat backrests can be folded forward
separately or together.
Fi g. 69 Re lease lever for th e outer bac kres t
,.._
18 0
~----ri: ~
Fig. 70 Release button for the ce nter backrest
Folding the backrest forward
• Pull the leve r up ¢ fig. 69. The backrest will
swing forwa rd.
• Let the ba ck rest latch into the lowest pos i­
t io n .
Raising the backrest
• Pull the leve r up ¢ fig. 69 and fo ld the back­
rest back up again until it latches sec ure
¢ &, .
Folding the center back rest forward
• Press the release button ¢ fig. 70. The red
mark ing o n the release button w ill be visi ­
ble .
• Fo ld the backrest forwa rd .
Folding the center back rest up
• Fo ld the backrest back up again until it se­
curely latches and the red marking is no lon­
ger visib le ¢
&, .
Seats and storage 67
The cen ter backrest can be folded down sepa ­
rately . This makes is possible to t ransport
l ong objects (for example, skis) inside the ve ­
hicle.
A WARNING
- The back rest must always be secure ly
latched so that the safety belt of t he cen­
ter seating position ca n work p roperly to
he lp prot ect the occupant.
- The back rest must be securely latched in
posi tion so that no items contained in
the l uggage compa rtme nt can s lide fo r­
ward upon su dden braking.
- Always ch eck whether the latc h is fully
e ngaged by pull ing t he seatback fo r­
ward.
- Never a llow safety belts to become dam­
aged by be ing c aught in do or or sea t
h ar dwa re .
- T orn or frayed safe ty be lts ca n tear a nd
da mage d be lt hardware can break i n a
cras h. I nsp ect the belts per io d ic all y.
Belts showing damage to webbi ng, bind ­
ings, buck les, o r retractors m ust be re­
p laced.
A WARNING
A lways read and heed WARNINGS¢ A in
Loading the luggage compartment on
page 145.
(D Note
- If you move the front seat bac k w hen t he
rear seat backrest is folded forward, you
cou ld damage the head restraints on the
rear seat.
- Slide the be lt g uide on the o utside safety
belt all t he way up before folding the
backrest back forward. Ma ke sure the
seat belt is not pinched or damaged
when the rea r seat backrest if fo lded
b ack.

68 Seats and storage
Expanding the luggage compartment
The rear seat backrests can be folded forward
separately or together.
Fi g. 71 Luggage compartment: release lever
Folding the backrest forward
~ Pull the release lever ¢ fig . 71 in d irect ion
of the arrow . The ba ck rest w ill swing for­
ward.
· ~ Let the backrest latch into the lowest pos i­
tion .
Folding the backrest up
~ Pull t he lever up ¢ page 67, fig. 69 and fold
the backrest back up again unti l it secure ly
latches ~
&-
A WARNING -
-The backrest must a lways be securely
latched so that the safety belt of the cen ­
ter seat ing pos ition can work properly to
help protect the occupant.
- The backrest must be securely latched in
posit ion so that no items contained in
the luggage compartment can slide for­
ward upon sudden braking .
- Always check whether the latch is fully
engaged by pu lli ng the seatback for­
ward .
- Never allow safety belts to become dam­
aged by being caug ht in doo r o r seat
hardware .
- Torn or frayed safety belts can tear and
damaged belt hardware can break in a
c rash . Inspect the be lts periodically .
Belts showing damage to webbing, bind­
ings, b uckles, or retractors must be re­
placed .
(D Note
-If you move the front seat back when the
rear seat backrest is folded forward, you
cou ld damage the head restraints on the
rear seat.
- Slide the be lt guide on the outside safety
belt all the way up before folding the
backrest back forward. Make sure the
seat belt is not pinched or damaged
when the rea r seat backrest if folded
back. Other objects should be removed
from the rear seat bench to protect the sea tback from damage.
Tie-down rings
There are four tie-down rings in the luggage
compartment for securing Luggage items.
Fig. 72 Locatio n of th e tie -dow n rin gs in the luggage
compart men t
~ Secure the cargo to the tie-down rings
~ fig. 72 .
~ Observe the safe ty notes ~ page 146.
In a collision, the laws of physics mean that
even smaller items that a re loose in the vehi­
cl e w ill turn into heavy m iss iles that can cause
serious injury. Items in the vehi cle pick up ki­
netic e nergy which var ies with the vehicle and
the weight of the item. Vehicle speed is the
most significant factor.
F or example, in a fronta l collision at a speed
of 30 mph (48 km/h), the forces acting on a
10 -lb (S kg) object a re abo ut
20 times the
normal weight of the item. This means that
the weight of the item would sudden ly be the
equivalent of about 200 lbs (90 kg). One can
easily imagine the injuries that an item of that""

84 On th e road
• Press the key ¢fig . 97- the engine will
start.
Switching the ignition on /off
If you wou ld like to switch the ignition o n
without starting the eng ine, follow these
steps:
• Insert the key into the ignition lock.
• Press the key b riefly
w itho ut press the
brake pedal.
• To switch the ignition off, press the key
again .
When starting the engine, major e lectr ica l
loads are switched off temporarily.
You can only remove the key w ith the ignition
switched off. To do this, you have to press on
the key aga in.
If the engine should not start immediately,
the starting process is automatically stopped
after a sho rt time. Repeat starting procedu re.
Sw it c hing the ignition /engine off
automatically *
The following applies to vehicles with Start­
Stop-System* /Hybrid drive*: to prevent the
battery from drain ing, the ignit ion and the en­
g ine will switch off automatically under the
following conditions :
- T he veh icle has al ready bee n driven .
- The driver's door is opened .
- The driver's seat belt is removed.
- The brake peda l is not pressed down.
- The veh icle is stationary.
I n th is case, the activated low beam w ill be re­
p laced by the side marker lights. The side
marker lights will switch off after a certain pe­
riod of time or w hen you lock the vehicle .
A WARNING
-Never allow the engine to run in confined
spaces - danger of asphyxiation .
- Never remove the ign ition key from the
ignition lock while the vehicle is moving.
Otherw ise, the steering lock could sud- denly engage and yo
u wo uld not be able
to steer the vehicle .
- Always take the key with you whenever
you leave your vehicle. Otherw ise, the
engine could be started or electrical
equ ipment such as the power windows
could be operated. This can lead to seri­
ous injury.
- Never leave children or persons requiring
assistance unattended in the vehicle . The
doors can be locked using the remote
transmitte r, prevent ing people from es­
caping from the ve hicle on t heir own in
t he event of an emergency. Depending
on the time of year, peop le inside the ve ­
hicle can be exposed to very high or very
low tempe ratu res .
(D Note
Avoid high eng ine rpm, f ull throttle and
heavy engine loads unti l the engine has
r eached operating temperat ure - ot her­
wise yo u risk eng ine damage.
@ For the sake of the environment
Do not let the engine run wh ile pa rked to
warm up. Begin driving immediately. This
r educes unnecessary emissions .
(D Tips
-If the key cannot be removed from the
ignition lock, you have to pull the me­
chanical key out of the master key in or­
der to be able to lock the vehicle
¢page 38.
-After starting a cold engine, there may
be a brief period of increased noise be­
cause the oil pressure must f irst bu ild up
in the hydraulic valve adjusters . This is
normal and not a cause for concern.
- If you leave the ve hicle with the ignition
switched on, the ignit io n w ill switch off
afte r a certain per iod of t im e. Please
note that ele ctri cal eq uipment su ch as
exterior l igh ts will sw itch off as well
when that happens .

86 On the road
(D Note
If the engine has been under heavy load
for an extended period, heat builds up in
the engine compartment after the engine
is switched off -there is a risk of damaging
the engine. Allow the engine to run at idle
for about two minutes before switching it
off.
Convenience key
Starting the engine
Appl ies to vehicles: with Convenience key
The I STAR T ENGINE S TOP! button switches
the ignition on and starts the engine .
Fig. 100 Center console: START ENGINE STOP butto n
Starting the engine
.. Hybrid drive* : refer to the information for
starting the vehicle under
¢ page 98 .
.. Step on the brake peda l and move the selec­
tor lever to P or N
¢ ,& .
.. Press on the r:I s==T::-:: A--=R== T=-c E=-c N:-;--:::: G-.,,.I ::-:N-;::: E-,S== T;:-; O:;--;P:cil button
c;, fig . 100 -the engine will start .
Switching the ignition on/off
If you would like to switch the ignition on
without starting the eng ine, follow these
steps :
.. Press the
!START ENGINE STOP! button
without pressing the brake pedal.
.. To sw itch the ignition off, press the button
again .
When starting the engine, major electr ical
loads are switched off temporarily . If
the engine should not start immediately,
the starting process is automatically stopped
after a short t ime. Repeat start ing procedure.
Start -Stop-System*:
If the vehicle stalls and the Start-Stop-Sys­
tem* for the eng ine shuts down, the ignition
still remains switched on.
- If you press the
I START ENGINE STOP I but­
ton now, the ignitio n will be switched off.
The engine w ill not start
¢page 93.
-Make sure that the igni tion is sw itched off
befo re exiting the vehicle.
Switching the ignition /engine off
automatically*
T he following app lies to veh icles with Start­
Stop-System*/Hybrid drive*: to prevent the
battery from draining, the ignition and the en­
gine wi ll switch off automatically unde r the
following conditions:
- The vehicle has already been driven.
- The driver's door is opened .
- The driver 's seat belt is removed .
- The brake pedal is not pressed down .
- The vehicle is stat ionary.
In this case, the activated low beam will be re ­
placed by the side marker lights. The side
marker lights wi ll switch off after a certain pe­
riod of time or when you lock the vehicle.
A WARNING
--Never allow the engine to run in conf ined
spaces -danger of asphyx iat ion.
- Always take the key with you whenever
you leave your veh icle. Otherw ise, the
engine could be sta rted or electrical
equ ipment such as the power windows
could be operated. This can lead to seri­
ous injury.
- Never leave children or persons requiring
assistance unattended in the vehi cle. The
doors can be locked us ing the remote
transmitter, preventing people from es­
caping from the veh icle on their own in
the event of an emergency . Depending