transmission oil AUDI Q7 2010 Owner´s Manual

& WARNING
Always observe the post ed speed limits and adjust your speed to
s uit prevailing road , traffic and weather condition s. Never drive
your vehi cle faster than the m aximum sp eed rating of the tires
installed .•
Auto Check Control
Introduction
The Auto-Check control monitors the function of certain vehicle
featu res a nd compo nents. It s imp ly makes su re t hese featu res and
components are working properly. The Auto-Check contro l works as
long as the igni tion is on, as we ll as whenever the veh icle is d riven.
If a compone nt is malfunctioning or if the need for an urgent repair
has been detected, this will appea r in the instrument cluster display .
You will also hear an audible warn ing tone . The d isp lays are colo r
coded in e ither red or yellow depend ing on their level of prior ity.
A red symbol means
Danger , a yellow symbol ind ic a tes Warning . In
certain situations, information message for the driver appear in addi­
t ion to the red and ye llow symbo ls.
Function test: automatic transmission
Th e Auto- Che ck Contro l will a utomat ica lly perfo rm a test ea ch t ime
you switch on the ignition. With the selector lever in
P or N, the
f ollowing mess age appears in t he disp lay:
When stationary apply foot brake while selecting gear.
When you a se lect a diffe rent gea r (for example : R, D , etc .), the
message w ill dis appea r and t he Auto-Check f unctio n is d isplayed.
If there is a ma lfunction, then the malfunction message will appear
abou t 15 seconds after the you start the veh icle . A t the same time
you will hea r a warni ng tone .•
Controls and equip ­
ment Safety first
Driver information display
Driver information messages
Dr
ive r inf orma tion messa ges a re sh ow n in the instru­
ment clus ter dis play i n addition to t he red a nd yell ow
symbols.
Fig . 16 Instrumen t
clu ster: CHE CK button
For examp le, if the transm ission selector lever is not in the P posit ion
w hen the eng ine is tur ned off , the foll owing message appea rs :
Shift to P otherwise vehicle can roll away. Doors do not lock if
you are not in P.
Th e ig nitio n key can only be removed w ith the se lector in this pos i­
tion. This and othe r messages are bro ught up if a function cannot be
c a rried out .
Driver messages and red symbols
If a red symbol appears i n the d isplay, a driver message can be s hown
by pressing the
! CHECK) button.
F or ex ample, the sym bo l for a prob lem wi th engine o il press ure~
appears in the display.
If you the n press the I CH ECK ) button, the
f ollowin g dr iver mes sage appears in the displ ay :
Switch off engine ! Oil pressure too low
The driver message in the display goes o ut after about 5 seconds . The
dr ive r m essage can be d isp laye d a gai n by briefly pres sing the
!CHECK ) button. .,.
Vehicle care Technical data

ffl.___E_ m_ e_ r-' g=- e_n_ c=-y _ s_it _ u _ a_t_ i_ o _ n_ s ______________________________________________ _
- Insert a rubber pad between the floor jack/workshop hoist
and the lifting points.
If you must lift your vehicle with a floor jack to work underneath,
be sure the vehicle is safely supported on stands intended for this
purpose.
Front lifting point
The lifting point is located on the floor pan reinforcement about at
t he same level as the jack mounting point::::;,
page 357, fig. 269. Do
not lift the vehicle at the vertical sill reinforcement.
Rear lifting point
The lifting point is located on the vertical reinforcement of the lower
sill fo r the onboa rd jack ::::;,
page 357, fig. 270 .
Lifting with vehicle jack
Refer to::::;, page 342.
& WARNING
• To reduce the risk of serious injury and vehicle damage.
-Always lift the vehicle only at the special workshop hoist and
floor jack lift points illustrated::::;,
page 357, fig. 269 and
::::;, page 357, fig. 270.
- Failure to lift the vehicle at these points could cause the
vehicle to tilt or fall from a lift if there is a change in vehicle weight distribution and balance. This might happen, for
example, when heavy components such as the engine block or
transmission are removed.
• When removing heavy components like these, anchor vehicle
to hoist or add corresponding weights to maintain the center of
gravity. Otherwise, the vehicle might tilt or slip off the hoist,
causing serious personal injury.
0 Note
• Be aware of the following points before lifting the vehicle:
- The vehicle should never be lifted or jacked up from under­
neath the engine oil pan, the transmission housing, the front or
rear axle or the body side members. This could lead to serious
damage.
- To avoid damage to the underbody or chassis frame, a rubber
pad must be inserted between the floor jack and the lift points.
- Before driving over a workshop hoist, check that the vehicle
weight does not exceed the permissible lifting capacity of the
hoist.
- Before driving over a workshop hoist, ensure that there is sufficient clearance between the hoist and low parts of the
vehicle. •

___ A_ l_. p_ h _ a_b_ e_ t_ic _a_ l_ in_ d_e _ x ____________________________________________ _
Master key ...... ..... .. .... ... .. .. . 4 1
Battery replacement ..... .. ........ 42
Check light ..... .. .. .. ...... ...... 42
Mileage Average ................ ...... .. . 37
Instantaneous ........... .. .... .. . 37
Mirrors Activating the digital compass ....... 81
Adjusting the anti-g lare .... ..... 77, 78
Automatic dimming for the outside m irrors .... .......... .......... 80
Automatically dimming inside m irror . 78
Ins ide day-night mirror .. .......... 77
Interior mirror ........... .. .. .. 77, 78
Outside mirrors ................... 79
Recalling position of outside mirrors .. 87
Storing position of outside mirrors ... 87
Monitor ing the Advanced A irbag System 220
N
Natural leather ............. .. .. .. .. 283
New tires and wheels .............. .. 326
NHTSA Contacting ...................... 197
Number of seats ............. .... ... 199
0
Occupant seating pos itions 190
Octane rating . .. .. .. .. .. .. .... ..... 287
Odometer ................... .... .. . 12
Offroad mode . .. .. .. .. .. .. ... .... .. 252 Oil
See Eng
ine o il ..... .... ... ... .... 299
On-Board Diagnostic System (OBD) Data Link Connector (DLC) ....... ... 26
Electronic speed Limiter ............ 26
Malfunction Indicator Lamp (MIL) .. .. 26
Open door or rear l id warn ing .. .. .. .. .. 24
open sky system
See Panoramic sliding sunroof ..... .. 59
Operate your vehicle economically and mini- mize pollution . .... .. .. ....... . 263
Optional equipment Marked with an asterisk . ... ........ . 6
Outlets ........................... 104
Outside air pollution How to prevent from entering the vehicle .
113
Outside mirrors ..................... 79
Outside temperature display ....... .. .. 23
Owner's manual How the Owner's Manual is organized .. 6
p
Paint
Touch-up ............ ... ... .. .. . 278
Paint No ... .... .. ........... ...... . 360
Panoramic sliding sunroof .......... .. . 59
Closing ............. ... ... ....... 60
clos ing ....... ... ... ... .. ... ..... 59
Conven ience closing ... ... ....... .. 61
Emergency operation ........ 62, 63, 64
sliding open . .. .. ........ ......... 59 Sunshade
.. .... .......... ... . ... . 61
tilt ing . ................ .......... 59
Parking . ... ....................... 130
Automatic transmission ........... 161 Caution when parking near a parking barri- er or curb .. .. .. .. ............. 130
Low bumper cover, spoilers and
suspension . ...... ............. 130
Parking brake ..... ................ . 129
Parking ............ .. .... .... .. 130
Warning/indicator lights . .......... 20
Parking on a decl ine (downhill) .. .... .. 130
Parking on an incline (uphill) ... .. .. .. . 130
Parking system advanced ........... . 169
Adjusting the display ...... ... .. .. 17 4
Adjusting the warning tones ....... 17 4
Rear view camera - parking mode l .. 172
Rear view camera - parking mode 2 .. 173
Safety precautions .. ............. 169
Switching on and off .......... .... 171
Trailer hitch .... .. ..... ..... ..... 175
Parts replacement .......... .. .. .. .. 368
PASSENGER AIR BAG OFF light .... .... 221
Passenger's seat .............. .... 84, 86
Passive safety system ............... 188
Pedals ................. ... .. .. .... 194
Perimeter lighting ..... ............. . 68
Physical principles of a frontal collision . 200
Polishing . .. .. ........ ............. 277
Pollen filter
Climate controls . ... ............. 109
Power locking switch ................. 47