height AUDI Q7 2015 Owner´s Manual

M N
0 ...J
'SI: ,...., \!) 1.1"1 ,...., 1.1"1 ,....,
Clos ing re ar lid /trunk lid
"' Press the close button in the open rear lid
~ fig. 40. The trun k lid moves to the closed
posit ion by itself and soft close locks it auto­
matically ~&_ .
"' The closing process
is stopp ed immediately
if the close button in the rear lid is pressed
again.
"' By push ing the button again, the rear lid is
opened again .
Setting the rear lid o pen po sition
"' Bring the rear lid into the desired open posi­
t ion. The posit ion can only be stored when
the lid is above a certain height .
"' Press and hold the
~fig . 40 button for at
least four seconds to store the desired open
pos ition.
"'T o set a h igher open position , wait at lea st
five seconds and then carefu lly press the
rear lid upward.
"' Press and ho ld the ~
fig. 40 button again for
at least four seconds and this will store the
new open position.
A WARNING
- Never close the rear lid inattentively or
without checking fi rst . Although the
closing force of the rear lid is lim ited,
yo u can st ill ser iously injure yourself or
others.
- Always ensure that no one is w ith in
range of the rear lid when it is mov ing, in
part icu lar close to the h inges and the up­
per and lowe r edges -fingers or hands
can be p inched.
- T o help p reven t po isonous exha ust gas
from being d rawn into the vehicle, al ­
ways keep the rear lid closed while driv­ ing. Never transport objects larger than
those which fit completely into the lug­
gage area, because then the rear lid can­
not be fully closed .
- Never leave your vehicle unattended es­
pecially with the rear lid left open. A
child could crawl into the car through the
luggage compartment and pull the lid
-
Opening and clo sin g 47
shut, becoming trapped and unable to
get out. To reduce the risk of personal in­
jury, never let ch ildren play in or around
your veh icle . Always keep the rear lid as
well as the vehicle doors closed when not in use .
- If there is a l uggage rack or b icycle rack
mounted on the rear lid, it may not be
ab le to open completely o r an opened
rea r lid may close by itself because of the
ad ded weight. So the open rear lid mus t
be supported or the weigh t must be re ­
moved from the luggage rac k first .
(D Tips
- If the rear lid is open o r not properly
locked when the ign ition is turned on ,
t he door and rear lid warning ~
page 22
appears in the instrument cluster dis­
play.
- The automatic rear lid opening/clos ing
process can be stopped by ho ld ing the
rear lid w ith your hand. The lid can then
be further opened/closed by hand.
- If there is a mechan ica l problem wit h the
automatic rear lid
opening process or
there is an obstruction, the process is
stopped immediately .
- If there is a mechan ica l problem with
au ­
tomatic closing for the rear lid or there
is an obstruction, it ope ns again slightly
r ight away. Check to see why the rear lid
cou ld not be closed before attempting to
close it again .
- If the rear lid on a locked vehicle is un­
locked with the midd le button
c:5 on the
remote key, the rear lid i s automat ically
locked agai n immed iate ly afte r closing.
T his is indicated by the turn signals
blinking .
- T he followin g applies to vehicles equ ip­
ped with the Convenience key* feature: i f
the remote control key is left in the lug­
gage compartment, luggage compart­
ment w ill automatically unlock itself a f­
ter you lock the vehicle. Th is prevents
you from unintentionally lock ing you r
key in the luggage compartment. ...,

7 4 Seats and stor age
Seats and storage
General recommen­
dations
Why is your seat adjustment so
important?
The safety belts and the airbag system can
only provide maximum protection if the front
seats are correctly adjusted.
There are various ways of adjusting the front
seats to provide safe and comfortable support
for the driver and the front passenger. Adjust
you r seat prope rly so that :
- you can easily and quickly reach all the
switches and controls in the instrument
panel
-your body is properly supported thus reduc­
ing physical stress and fatigue
- the safety be lts and airbag system can offer
maximum protection
¢ page 182 .
In the following sections, you will see exactly
how you can best adjust your seats .
There are special regulations and instructions
for installing a child safety seat on the front
passenger's seat. Always follow the informa­
tion regarding child safety provided in
q page 203, Child Safety.
A WARNING
Incorrect seating position of the driver and
all other passengers can result in serious
personal injury.
- Always keep your feet on the floor when
the vehicle is in motion -never put your
feet on top of the instrument panel, out
of the w indow or on top of the seat cush­
ion . This applies especially to the passen­
gers .
If your seating position is incorrect,
you increase the risk of injury in the case
of sudden braking or an acc ident.
If the
airbag inflates and the seating position
is incorrect, this could result in personal
injury or even death.
- It is important for both the driver and
front passenger to keep a distance of at least 10
inches (25 cm) between them­
selves and the steering wheel and/or in­
strument panel. If you're sitting any
closer than this, the airbag system can­ not protect you properly . In addition, the
front seats and head restraints must be
adjusted to your body height so that they
can give you maximum protection.
- Always try to keep as much distance as
possible between yourself and the steer­
ing wheel or instrument panel.
- Do not adjust the driver's or front pas­
senger's seat while the vehicle is moving.
Your seat may move unexpectedly, caus­
ing sudden loss of vehicle control and
personal injury. If you adjust your seat
while the veh icle is moving, you are out
of position.
Driver's seat '
The correct seat position is important for safe
and relaxed driving.
We recommend that you adjust the driver's
seat in the following manner :
.,. Adjust the seat in fore and aft direction so
that you can easily push the peda ls to the
floor wh ile keeping your knees sl ightly bent
q A in Why is your seat adjustment so im­
portant? on page 74.
.. Adjust the seatback so that when you sit
with your back against the seatback, you can
still grasp the top of the steering wheel.
.. Adjust the head restraint so the upper edge
is as even as possible with the top of your
head . If that is not poss ible , try to adjust
the head restraint so that it is as close to
this position as possib le
q page 79.
A WARNING
Never place any objects in the driver's foot­
well. An object could get into the pedal
area and interfere with pedal function. In
case of sudden braking or an accident, you
would not be able to brake or accelerate .

M
"' 0 _,
"". rl I.O
"' rl
"' rl
Front passenger's seat
Always move the front passenger seat into the rearmost position .
To avoid contact with the airbag while it is de­
ploying, do not sit any closer to the instru­
ment panel than necessary and always wear
the three-point safety belt provided adjusted
correctly . We recommend that you adjust the
passenger's seat in the following manner:
.. Move the front passenger seat into the rear ­
most position of the fore and aft adjustment
range
~ .&. in Why is your seat adjustment
so important? on page 74.
• Bring the backrest up to an (almost) upright
position.
Do not ride with the seat reclined.
.. Adjust the head restraint so the upper edge
is as even as possible with the top of your
head . If that is not possible, try to adjust
the head restraint so that it is as close to
th is position as possible ¢
page 79 .
.. Place your feet on the floor in front of the
passenger's seat .
Power front seat
adjustment
Seat adjustment controls
The operating logic for the switches corre­
sponds to the cons truction and function of
the seat.
ui
"' ~ -" __.___,., 1,--~--,-,:,
Fig. 77 Fron t seat: Co ntr ols for seat a djustment
The switches to adjust the seat cushion and
the seatback correspond to the layout, the de­
sign and the function of the seat. The seats
are adjusted by moving the switches following
this logic.
Seats and storage 75
Controls
@ Seat adjustment
® Seatback adjustment
© Lumbar support
Adjusting the seat
Position, angle and shape of the seat can be
adjusted electrically to ensure safe and com­
fortable seating .
Read and follow the warning notices¢.&. be­
fore you adjust your seat .
Fore-and-aft adjustment
.. Push the switch @forward or backward
¢ page 75, fig. 77 .
Adjusting seat height
.. Pull or push the switch @up or down.
Front seat cushion up/ down
.. Press the switch @at the front up or down .
Rear seat cushion up/ down
.. Press the switch @at the rear up or down.
Adjusting seatback angle
.. Push the switch @ forward or backward.
Adjusting the curvature of the lumbar
support
.. Push the switch plate© forward or back­
ward to increase or reduce the curvature.
Adjusting the height of the lumbar
support
.. Push the switch plat e© up or down to posi­
tion the curvature higher or lower .
A WARNING
-Adjust the driver's seat only when the ve­
hicle is stationary. You risk an accident
otherwise.
- The power adjustment for the front seats
also works with the ignition sw itched off
or with the ignition key removed. For this
reason, children should never be left
IJIJ>

76 Seats and storage
unattended in the vehicle -they could be
injured!
- Exercise caution when adjusting the seat
height. Unsupervised or careless seat ad­
justment can pinch fingers or hands
causing injuries.
- While the vehicle is moving, the seat­
backs of the front seats must not be in­
clined too far to the rear because the ef­
fectiveness of the safety belts and the
airbag system is severely compromised -
there is a risk of injury.
- To reduce the risk of injury in the case of
sudden braking or accident, front pas­
sengers must never ride in a moving ve­
hicle with the seatback reclined. Safety
belts and the airbag system only offer
maximum protection when the seatback
is upright and the safety belts are prop­
erly positioned on the body. The more
the seatback is reclined, the greater the
risk of personal injury from an incorrect
seating position and improperly posi­
tioned safety belts.
Seat memory
Driver's seat memory
A ppl ies to vehicles: w ith sea t memo ry
The seat adjustment settings for two drivers
can be stored using the memory buttons in
the driver's door.
Fig. 78 Driver's door : Seat memory
In addition to the setting for the driver's seat,
the settings for the steering column* and
both exterior mirrors can be stored .
Storing and recalling settings
Using the memory buttons 1 and 2, you can
store and recall the settings for two different
drivers¢
fig. 78.
The current settings are also automatically as­
signed to the remote control key being used
when the vehicle is locked. When the vehicle
is unlocked, the settings assigned to the re­
mote control key being used are automatically
recalled. This function has to be activated in
the MMI ¢
page 77, Activating remote con­
trol key memory.
Turning seat memory on and off
If the I ON/OFF I switch is depressed, the seat
memory is inoperative. The word
OFF next to
the
ION/OFF ! switch illuminates.
All the stored settings are retained. We rec­
ommend using the
ION/OFF I switch and deac­
tivating the seat memory if the vehicle is only
going to be used
temporarily by a driver
whose settings are not going to be stored.
Storing and recalling a seat position
Applies to vehicles: with seat memory
Before you can store or recall your seat posi ­
tion, the
ION/OFF I button must be engaged
(down) .
Storing settings
.,. Adjust the driver's seat¢ page 75 .
.,. Adjust the steering column*¢ page 105 .
.,. Adjust both outside mirrors¢ page 70. In
the tilt-down position, the passenger mirror
can be adjusted to the preferred position
and saved in the seat memory .
.,. Press the
ISETI button and hold it down. At
the same time, press one of the memory
buttons for at least one second .
.,. Release the buttons. The settings are now
stored under the corresponding memory
button.
Recalling settings
.,. If the driver's door is open and the ignition
is switched off, press the desired memory
button.
...

M
"' 0 ..J
"". rl I.O
"' rl
"' rl
Folding seatback up and down (third
row seating)
Applies to vehicles: with third row seatin g
The third row seating is suitable for persons
up to 1.6 meters (5 ft 3 in) in height .
Fig. 82 Third row of seats: Folding seatback up
Fig. 83 Third row of seats: Folding seatback down
Raising seatback
~ Lift the lever -Arrow-¢ fig. 82 and raise the
seatback until it locks.
~ Raise the head restraint until it locks.
Folding seatback down
~ Lift the lever -Arrow-¢ fig. 83 and fold the
seatback down complete ly until it locks.
~ The head restraint is automat ically t ipped
down.
A WARNING
- Only persons up to a height of 5 feet 3
inches (1.6 m) may be carried on the
seats in the th ird row .
- Exercise caution when folding the seat­
backs up and down. Inattentiveness or
carelessness when folding the seatback
up and down can pinch fingers or hands.
-
Seats and storage 79
-Always check whether the latch is fully
engaged by pull ing the seatback for­
ward.
Head restraints
Front head restraints
Fig. 84 Front seats head restra ints: adjus ting t he
h eig ht
The head restraints on the front seats can be
adjusted to provide safe support to head and
neck at the optimum height. When optimally
adjusted, the top of the restraint should be level with the top of the head . If that is not
possible, try to adjust the head restraint so
that it is as close to this position as possible
¢ page 166 , Proper adjustment of head re­
straints .
~ To move the head restraint up, hold it at the
sides with both hands and slide it upward.
~ To move the head restraint down, press the
button and slide the head restraint down­
ward
¢ fig . 84.
Refer to ¢ page 166, Proper adjustment of
head restraints
for guidelines on how to ad­
just the height of the front head restraints to
su it the occupant's body size.
A WARNING
- Driving without head restraints or with
head restraints that are not properly ad­
justed increases the risk of serious or fa ­
tal neck injury dramatica lly.
- Read and heed all WARNINGS
c::> page 166, Proper adjustment of head
restraints.

M
"' 0 ..J
"". rl I.O
"' rl
"' rl
.. Push on the release lever r::!>fig . 87to open
the storage compartment.
A maximum of two beverages can be accom­ modated in the armrest. The second cup hold­
er is located under a cover .
A WARNING
Spilled hot liquid can cause an accident
and personal injury.
-
-Never carry any beverage containers with
hot liquids, such as hot coffee or hot tea,
in the vehicle while it is moving . In case
of an accident, sudden braking or other
vehicle movement, hot liquid could spill, caus ing scald ing burns . Sp illed hot liquid
can also cause an accident and personal
injury .
- Use only soft cups in the cupholder. Hard
cups and glasses can cause injury in an
accident.
CD Note
Only drink containers with lids should be
carried in the cupholder . Liqu id could spill
out and damage your veh icle's e lectronic
equ ipment or stain the upholstery, etc.
Long center console
App lies to vehicles: with long center console
Fig. 88 L ong rea r ce nte r console
T here are two cupho lders and a storage bin in
the
long rear center console. The armrest is
also height adjustable .
Beverage holder
.. Tap the cover c::> fig . 88 -Arrow-for it to open
automatically.
Seats and storage 81
.. Push the cover down to close the bin .
Storage compartment
.,. Lift the cover by the front to open the com-
partment.
.. Push the cover down to close the bin.
Adjusting the armrest
.. Press the release button. The armrest moves
up automatically .
.,. Release the button when the desired height
is reached .
.,. Press the release button again and at the
same time push the armrest down to lower
it.
A WARNING
--
Spilled hot liquid can cause an accident
and personal injury .
- Never carry any beverage containers with
hot liquids, such as hot coffee or hot tea,
in the vehicle while it is moving. In case
of an acc ident, sudden braking or other
vehicle movement, hot liquid could spill,
causing scalding burns . Spilled hot liquid
can also cause an accident and pe rsonal
injury.
- Use on ly soft cups in the cupholder . Hard
cups and glasses can cause injury in an
accident .
CD Note
Only drink containers with lids should be
carried in the cupholder. Liquid cou ld spill
out and damage you r vehicle's electronic
equipment or stain th e upho lstery, etc.

M
"' 0 ..J
"". rl I.O
"' rl
"' rl
-So that stale air can escape from the ve­
hicle be sure not to cover the ventilation
s lot between the rear lid and the lug ­
gage compartment cover.
Protective liner
Dirty or wet objects can be transported under the cargo floor in a protective troy.
Fig . 95 Cargo f loo r: folded upr ight
Fig . 96 Removing the cargo floor
Setting up the cargo floor
• Open the rear lid.
•Setup cargo floor with the help of the han­
dle @¢
fig. 95 and adjust the outs ide
edges in the recesses @.
• Lay the items in the protect ive tray.
Folding the cargo floor up
• Open the rear lid.
• Fold the cargo floor up to the seatback with
the help of the handle @.
Removing the cargo floor, installing
• Open the rear lid.
• Fold the cargo floor up to the seatback with
the help of the handle @.
• To remove, pull the entire cargo floor out of
the gu ides -arrow- ~
fig. 96 in the direction
of the rear of the vehicle .
Seats and storage 85
• To install the cargo f loor, set the front of it
into the guides and push it in the direction
of the seatback until it engages.
You can also store sma ll items
under the car­
go f loor.
The storage room in the protect ive tray can be
enlarged by folding the cargo floor forwa rd or
removing it .
T he protect ive tray can be removed upward by
the grip.
On vehicles with
6 or 7 seats* the cargo floor
cannot be folded up, only raised . If the cargo
floor is removed, the hooks must be pushed into the guides under the third row seating
when the cargo floor is re-installed.
& WARNING ~
When the cargo floor is folded upright, the
items being transported must not exceed
the maximum cargo height, 2/3 of the car­
go floor space with the floor folded for­
ward, or a weight of about 33 lb. (15 kg).
{I) Tips
We recommend that you use a tie-down
strap to secure objects to the tie-down
eyelets on the right and left sides of the
vehicle.
Ski sack
App lies to vehicles: wit h ski sack
The ski sock allows a maximum of 4 pairs of
skis or 2 snowboards to be carried inside the vehicle.
Fig. 97 Securing t he ski sack at the center rear seat
be lt buck le

M
"' 0 _,
"". rl I.O
"' rl
"' rl
can cause the roof rack or the items at­
tached to it to fall off the roof onto the
road.
- Objects falling from the roof of a vehicle
can cause a crash and personal injury.
- Only mount the system between the
markings shown in
r:> page 87, fig. 98.
-The roof rack system must be installed
exactly according to the instructions pro­
vided.
(D Note
- Your vehicle warranty does not cover any damages to the vehicle caused by using
roof racks or mounting structures not
approved by Audi for your vehicle. The
same applies to damage resulting from i ncorrect roof rack installation.
- Always check the roof rack mountings
and hardware before each trip and dur­
ing a trip to make sure everything is se­
curely tightened. If necessary, retighten
the mount ings and check the entire sys­
tem from time to time.
- After mounting a roof rack system, or
when you transport objects on the roof
of your veh icle, the height of the vehicle
i s natura lly increased. Be careful when
driving under low bridges or in parking
garages for example. This could cause
damage to the load and even the vehicle
itself.
Roof rack mounting locations
Roof racks must be installed only at the loca­
tions marked on the roof rails.
i
-
Fig. 98 Roof ra ils: front and rear mounting locations
Seats and storage 87
Mount the front and rear cross bars between
the punched markings on the inside of the roof ra ilings
¢ fig . 98. The markings are locat­
ed on the inside of the ra ilings.
Loading the roof rack
Always distribute loads evenly. Make sure
anything on the roof rack is securely tied
down.
.,. Always distribute the loads on the roof rack
even ly .
.,. Always attach items to the roof rack securely
before you drive off.
The maximum permissible roof weight is
220
lb (100 kg).
The roof weight is made up of
the weight of the roof rack system and the
weight of the object being transported.
When using a roof rack system which has a
lower load carrying capacity, you must not use
up the total maximum permissible load carry­
ing capacity specified above. Instead, you
should load the roof rack system only to the maximum capacity specified by the manufac­
turer of the roof rack system .
& WARNING
Weak, damaged or imprope r straps used
to secure items to the roof rack can fail
during hard braking or in a collision and
cause serious personal injury.
- Make sure the roof rack is installed exact­
ly as specified above¢
page 87 .
-Always use suitable mount ing straps for
securing items to the roof rack to help
prevent items from shifting or flying for­
ward.
- Items on the roof rack must a lways be
securely mounted.
- The use of a roof rack can negatively af­
fect the way a veh icle hand les. Cargo
that is large, heavy, bulky, long or flat
will have a greater negative influence on
the vehicle's aerodynamics, center of grav ity and overall handling. Always
drive slowly, avoid sudden braki ng and .,.

M
"' 0 ..J
"". rl I.O
"' rl
"' rl
On the road
Steering
Manually adjustable steering wheel
Applies to vehicles: with manu ally adjustable steering
w hee l
The height and reach of the steering wheel
can be adjusted.
Fig. 120 Lever under the steer ing column
First, adjust the driver's seat correctly .
.. Pull the lever
q fig. 120 -Arrow-q ,A.
.. Move the steering wheel to the desired posi­
tion.
.. Push the lever against the steering column
until it locks.
There must be at least 10 inches
(25 cm) be­
tween your chest and the center of the steer­
ing wheel.
If you cannot sit more than 10 in­
ches
(25 cm) from the steering wheel, see if
adapt ive equipment is available to help you
reach the pedals and increase the distance
from the steering whee l.
For detailed information on how to adjust the
driver's seat, see
¢page 75 .
& WARNING
Improper use of steering wheel adjust­
ment and improper seating position can
cause serious personal injury.
- Adjust the steering wheel column only
when the veh icle is not moving to pre­
vent loss of vehicle control.
-
- Adjust the driver's seat or steering wheel
so that there is a minimum of 10 inches
(25 cm) between your chest and the
steering wheel ¢
page 164, fig. 194. If
On the road 105
you cannot maintain this minimum dis­
tance, the airbag system cannot protect
you properly.
- If physical limitations prevent you from
sitting 10 inches
(25 cm) or more from
the steering wheel, check with your au­
thorized Audi dealer to see if adaptive
equipment is available.
- If the steering wheel is aligned with your
face, the supplemental dr iver's a irbag
cannot provide as much protection in an
accident. Always make sure that the
steering wheel is aligned with your
chest.
- Always hold the steer ing wheel w ith your
hands at the 9 o'clock and 3 o'clock posi­
tions to reduce the risk of personal injury
if the driver's airbag dep loys .
- Never hold the steering wheel at the 12
o'clock position or with your hands inside
the steering wheel rim or on the steering
wheel hub . Holding the steering wheel
the wrong way can cause serious injuries
to the hands, arms and head if the driv­
er's airbag deploys.
Electrically adjustable steering wheel
App lies to vehicles: with electrically adjustable steering
w heel
The height and reach of the steering wheel
can be electrically adjusted to suit the driver.
Fig. 121 Switch for stee ring wheel adjustment
First, adjust the driver's seat correctly.
Height adjustment
.. Push the switch @ up or down <=> fig. 121 .
The steering wheel height changes for as
long as you press the sw itch.

112 On the road
The parking brake warning light. (USA)/ .
(CON) illuminates when the parking brake is
set and you switch on the ignition.
A WARNING
-
Always release the parking brake com­
pletely. A partially engaged brake will
overheat the rear brakes, reduce their ef­
fectiveness and cause excessive wear . This
could lead to brake failure and an accident .
(D Note
Only after the vehicle has come to com­
plete stop, should you firmly set the park­
ing brake and move the selector lever into
P.
Parking
• Press the brake pedal to stop the vehicle .
• Apply the parking brake firmly
r=,> page 111,
fig. 126 @.
• Move the selector lever to P.
.. Turn the engine off
r=,> _& .
.. When on inclines or declines, turn the steer­
ing wheel so that the vehicle will roll into
the curb if it begins to move.
A WARNING
This is how you can reduce the risk of in­
jury when leaving your vehicle.
- Never park the vehicle where it can come
in contact with dry grass, spilled fuel or
any other flammable materials.
- When parking on hills, always turn the
wheels so that the front wheels will first
roll into the curb, if the vehicle should
start to roll.
- Never allow anyone - especially small
children - to remain in the vehicle when
it is locked. Locked doors make it more
difficult for rescuers to access the pas­
senger compartment in the event of an
emergency. Danger to life!
- Never leave children unsupervised in the
vehicle. Children could release the park­
ing brake or move the gearshift lever out
-
of gear. The vehicle could start to roll
away and cause an accident.
- No matter what the season is, the tem­
perature in a parked vehicle can reach
dangerous levels.
Q) Note
- Please exercise care when you park your
vehicle in parking areas with parking bar­
riers or curbs. Parking barriers and curbs
vary in height and could damage your
bumper and related components as the
front of your vehicle moves over a barrier
or curb that is too high, as you park or as
you back out of a parking spot. In order
to be sure that no such damage can oc­
cur, you may wish to stop short of having
the front tires of your car touch the park­
ing barrier or curb.
- Please also exercise exceptional care
when you drive up or down steep ramps
or drive over curbs or other obstacles, for
which the vehicle is not designed, be­
cause components of th@ vehicle close to
the ground, such as bumper covers,
spoilers and suspension and exhaust sys­
tem components, may become dam­
aged.
Starting on hills
Hill Hold makes it easier to start on hills.
The system is activated when the brake pedal
is depressed
for a few seconds . For this, the
vehicle must be standing in uphill driving di­ rection.
After releasing the brake pedal, the brake power is held for a
brief moment to prevent
the vehicle from rolling back when starting. At
this time, you can easily begin to move your
vehicle .
A WARNING
- If you did not begin moving immediately
after releasing the brake pedal, under
certain circumstances, the vehicle would
begin to roll backward. Depress the ..,.