Car button AUDI R8 2008 1.G Infotainment MMI Operating Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2008, Model line: R8, Model: AUDI R8 2008 1.GPages: 193, PDF Size: 6.18 MB
Page 83 of 193
Managing the directory81
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Press the rotary pushbutton to open the entry space
Surname. The speller will appear on the MMI display
page 43.
– Using the speller, enter the name and confirm your entry
by turning the speller to mark OK and then pressing the
rotary pushbutton. The entry space will appear in the
MMI display.
– To enter more data, select an entry space using the rotary
pushbutton and proceed as described above.
Applies to vehicles: with Bluetooth car telephone kit or phone pre-installation
Importing entries from the phone book
Entries can be imported into the directory from the phone
book of your mobile phone.
Important: The directory must be open page 80 and the
phone pre-installation page 20 or the Bluetooth car tele-
phone kit page 25 must be activated.
Importing an entry
– Press the control button for Import. The menu From
phone book will appear on the MMI display fig. 72.– To import an entry from the list turn the rotary push-
button to mark the entry and press to confirm. The entry
will then be imported.
– To find an entry on the SIM card or in the phone book of
your mobile phone, turn the rotary pushbutton to select
Find entry page 80, fig. 70. The speller will appear on
the MMI display page 43.
– Using the speller, enter the name and confirm your entry
by turning the speller to mark OK and then pressing the
rotary pushbutton. The entry will then be imported.
Importing all entries
– Press the control button for Import. The menu From
phone book will appear on the MMI display fig. 72.
– Turn the rotary pushbutton to select Import all entries
and press it. The entries will then be imported.
You can only store up to 150 entries in the directory. If there are
more entries on the SIM card or in the phone book of your mobile
phone than there are memory positions in the directory, a message
will appear in the MMI display. You can either store entries from the
SIM card or the phone book to the free memory positions or stop the
import function.
Note
You can call up the memory capacity of the directory page 86.
Fig. 72 Importing
entries from mobile
phone book
Page 84 of 193
Managing the directory 82
Using an entry
Finding an entry
You can select an entry directly from a list or find it by
using the speller.
Important: The directory must be open page 80 and
entries must be displayed page 80.
Selecting an entry from a list
– Turn the rotary pushbutton to mark an entry fig. 73
and press to confirm. The entry will appear on the MMI
display together with all the data stored to it.
Finding an entry using the speller
– Turn the rotary pushbutton to Find entry fig. 73 and
press to confirm. The speller will appear on the MMI
display page 43.
– Using the speller, enter the name, or
– Use the speller to find an entry via the option LIST.– Turn the speller to OK and press the rotary pushbutton to
confirm. The entry will appear on the MMI display
together with all the data stored to it.
Note
You can change, copy, delete page 83 and call an existing entry or
navigate to it.
Applies to vehicles: with Bluetooth car telephone kit or phone pre-installation
Calling an entry
A telephone connection to directory entries can be estab-
lished.
Important: The directory must be open page 80, and it
must contain entries with telephone numbers page 80.
– Press the Options control button.
– Turn the rotary pushbutton to select Call fig. 74 and
press to confirm. A list of entries will appear in the MMI
display.
– Use the speller to find an entry from the list page 82.
Fig. 73 Finding an
entry
Fig. 74 Calling an
entry
Page 85 of 193
Managing the directory83
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– If two telephone numbers are stored to the entry, turn the
rotary pushbutton to select one of the two and press to
confirm. The telephone number will be dialled.
Applies to vehicles: with navigation system
Navigation
You can navigate directly to entries that have navigation
destinations.
Important: The directory must be open page 80, it must
contain stored entries with a navigation destination
page 84, and the navigation DVD must be inserted
page 14.
– Press the Options control button.
– Turn the rotary pushbutton to Navigate to and press the
rotary pushbutton. A list of entries will appear in the MMI
display.
– Use the speller to find an entry from the list page 82.– If two navigation destinations are stored to the entry,
turn the rotary pushbutton to select one of the two and
press to confirm. The navigation system will be activated
and will calculate the route.
Editing an entry
Applies to vehicles: with Bluetooth car telephone kit or phone pre-installation
Importing a telephone number
You can import a telephone number to an existing entry
in the directory.
Fig. 75 Selecting a
navigation destination
Fig. 76 Importing
numbers using the
speller
Fig. 77 Importing the
telephone number
from a received call
Page 86 of 193
Managing the directory 84
Important: An entry must be displayed in the directory, and
the phone pre-installation page 20 or the Bluetooth car
telephone kit page 25 must be activated.
– Turn the rotary pushbutton to select Te l e p h o n e or
Mobile. The speller will appear on the MMI display
page 43.
– Turn the speller to Import page 83, fig. 76 and press
the rotary pushbutton. The menu Import from will appear
on the MMI display page 83, fig. 77.
– Turn the rotary pushbutton to select the list you want to
import the telephone number from (e.g. Received calls
page 83, fig. 77).
– Press the rotary pushbutton. A list of telephone numbers
will appear in the MMI display.
– Turn the rotary pushbutton to select a telephone number.
– Press the rotary pushbutton to import the telephone
number.
Of course you can also enter a telephone number directly into the
entry space for Telephone or Mobile (using the speller) without
using the import function.
If the functions are displayed in grey lettering, please check that
your car telephone is switched on, that your mobile phone is
bonded to the car telephone kit or has been inserted into the
adapter and switched on, and that there are telephone numbers in
your phone's call lists.
Note
In vehicles with phone pre-installation* the import function
depends on what mobile phone you are using. Functions that
appear in grey lettering cannot be selected.
Applies to vehicles: with navigation system
Storing a navigation destination
You can store a private and a business destination to any
existing entry in your directory.
Important: An entry must be displayed in the directory.
Entering a destination directly
– Turn the rotary pushbutton to select Nav. destination
(business) or Nav. destination (private).
– Press the rotary pushbutton. An entry space will now
appear fig. 78.
Fig. 78 Entry space:
navigation destination
Fig. 79 Storing a desti-
nation
Page 87 of 193
Managing the directory85
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Turn the rotary pushbutton and select Country.
– Press the rotary pushbutton. The speller will appear on
the MMI display page 43.
– Using the speller, enter the name of the country and
confirm your entry by turning the speller to OK and then
pressing the rotary pushbutton.
– To enter more data, select an entry space using the rotary
pushbutton and proceed as described above.
– Turn the rotary pushbutton to Store destination
page 84, fig. 79.
– Press the rotary pushbutton to store the navigation desti-
nation.
Importing a recent destination
– Turn the rotary pushbutton to select Nav. destination
(business) or Nav. destination (private).
– Press the rotary pushbutton. An entry space will now
appear page 84, fig. 78.
– Turn the rotary pushbutton to Copy from last
destinations page 84, fig. 78. A list of navigation desti-
nations will appear.
– Turn the rotary pushbutton to select a navigation desti-
nation.
– Press the rotary pushbutton to import the navigation
destination.
– Turn the rotary pushbutton to Store destination
page 84, fig. 79.– Press the rotary pushbutton to store the navigation desti-
nation.
All directory entries can be stored with two navigation destinations.
These navigation* destinations can be accessed via the Memory
control button (Load from directory) page 115.
Note
You can also set a navigation destination as a top destination. Top
destinations are displayed in the navigation main menu
page 116.
Changing or copying an entry
Entries are stored in the directory as address cards which
you can change anytime.
Important: The directory must first be opened page 80.
– Press the control button for Edit.
– To change an entry, turn the rotary pushbutton to Change
entry.
– To copy an entry, turn the rotary pushbutton to Copy
entry. The copied entry will be appended with (Copy).
– Press the rotary pushbutton. A list of entries will appear
in the MMI display.
– To select an entry from the list turn the rotary pushbutton
to mark the entry and press to confirm, or
– To find an entry, turn the rotary pushbutton to Find entry
and press to confirm. The speller will now appear on the
MMI display page 43. You can use it to search for a
specific entry page 82.
Page 90 of 193
Using the telephone 88
Applies to vehicles: with Bluetooth car telephone kit or phone pre-installation
Activating the telephone
Important: The MMI system must be switched on
page 40.
– Press the function selector button marked . The
speller for entering the PIN code fig. 81 or telephone
numbers fig. 80, or the last telephone menu to be
opened will appear on the MMI display.
The menu that was active when you were last using the telephone
will appear on the MMI display. Call up the speller by pressing the
function selector button marked again (while the telephone is
activated).
Applies to vehicles: with Bluetooth car telephone kit or phone pre-installation
Entering the PIN/PUK code
Important: The telephone must be activated first page 26,
and the PIN/PUK symbol must appear in the status line
fig. 81.
– Press the function selector button marked . The
speller will appear on the MMI display page 43.
– Enter the PIN or PUK code via the speller. Turn the speller
to OK and press the rotary pushbutton to confirm. The
speller for entering a telephone number will appear on
the MMI display.
PIN code (Personal Identification Number)
The PIN (Personal Identification Number) consists of 4 to 8 digits
and protects your SIM card from unauthorised use.
You receive the PIN code from your mobile network service provider
together with the SIM card. If you enter the PIN code incorrectly
three times
11) in a row, the SIM card will be blocked and a message
will appear on the MMI display.
Fig. 80 Speller for the
entry of a telephone
number
TEL
TEL
11)The number of possible attempts depends on the SIM card.
Fig. 81 Entering PIN
code
A1
TEL
Page 91 of 193
Using the telephone89
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control PUK code (Personal Unblocking Key)
The 8-digit PUK code (Personal Unblocking Key) is used to unblock a
SIM card which has been blocked.
You receive the PUK code from your mobile network service provider
together with the SIM card. If you have entered the PUK code incor-
rectly ten times
11) in a row, please contact your service provider.
Note
•An emergency call (SOS) can be placed without first entering the
PIN code. In such cases you will be connected with the emergency
services number 112 page 89.
•You can also enter the PIN code via the handset* page 140 or
the mobile phone.
•You can save the PIN code in the MMI using the Autom. PIN
recognition function page 98.
•For more information on PIN settings, please refer to
page 98.
Applies to vehicles: with Bluetooth car telephone kit or phone pre-installation
Emergency calls
You can place an emergency call at all times - with or
without entering the PIN code.
Important: The MMI system page 38 and the car tele-
phone or the mobile phone* must be switched on.
Without SIM card
– Press the function selector button marked . The
speller for entering the PIN code will appear on the MMI
display .
– Press the control button for SOS fig. 82.
– Turn the rotary pushbutton and select Dial.
– Press the rotary pushbutton to start the emergency call.
With SIM card and PIN entered
– Press the function selector button marked . The
speller will appear on the MMI display.
– Enter the emergency number (e.g. 112) via the speller.
– To start the emergency call press the control button Dial,
or
–Turn the speller to OK and press the rotary pushbutton.
Emergency numbers are not the same for all countries. Please make
sure that you know the emergency number for the country you are
in.
Always follow the directions of the emergency operators when
making an emergency call and do not end the call before you are
requested to do so.
If you make an emergency call from a mobile phone with Hands-
Free Profile*, you may have to end the call from the mobile phone.
Whether or not you can end the call from the MMI depends on the
type of mobile phone used.
Fig. 82 Control button
SOS
TEL
TEL
Page 92 of 193
Using the telephone 90
WARNING
Since your telephone operates via radio waves, a connection
cannot be guaranteed under all circumstances. Do not rely solely
on your telephone when a vital communication (e.g. medical emer-
gency) is involved.
Note
You can also place an emergency call using the handset*
page 147.
Dialling a telephone number
Applies to vehicles: with Bluetooth car telephone kit or phone pre-installation
Directly via the speller
Using the speller, you can enter a telephone number
directly (as a series of numbers or as a series of letters).
Important: The telephone mode must be activated
page 26, and the speller must be displayed on the MMI
display fig. 83.
Entering a telephone number using numbers
– Enter the telephone number via the speller.
– To confirm your entry turn the speller to OK and press the
rotary pushbutton, or
– Press the control button for Dial. After the connection
has been established, the audio system will be muted.
Entering a telephone number using letters
– Enter a code, e.g. 0800 via the speller fig. 83.
– To switch to the speller for letters, turn the speller to A-Z
fig. 83 and press the rotary pushbutton. The speller
for letters will appear on the MMI display fig. 84.
– Enter a series of letters, e.g. AUDISERVICE via the speller
fig. 84.
– To confirm your entry turn the speller to OK and press the
rotary pushbutton, or
Fig. 83 Entering a tele-
phone number via the
speller for numbers
Fig. 84 Entering a tele-
phone number via the
speller for letters
A1
Page 93 of 193
Using the telephone91
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Press the control button for Dial. The telephone number
entered will be dialled.
Should you have entered a telephone number incorrectly, you can
delete the telephone number you have entered into the speller by
pressing the control button .
Note
•DTMF tones can be entered directly using the speller or loaded
from the telephone numbers stored in the memory lists page 91.
•The audio source is muted automatically when you make or
receive telephone calls. The mute symbol page 42, fig. 31 will
then appear in the status line.
•If you activate the voice guidance option off (phone)* in the navi-
gation* function you will not hear any navigation cues while you are
talking on the telephone* page 119.
•If the MMI display was switched off, it will be switched on auto-
matically for the duration of the telephone call.
Applies to vehicles: with Bluetooth car telephone kit or phone pre-installation
From a list
Important: The telephone mode must be activated
page 26.
Finding and calling a telephone number from a
list
– Press the Memory control button.
– Turn the rotary pushbutton and select Numbers dialled,
Directory, Phone book, Received calls or Missed calls.
– Press the rotary pushbutton. The telephone numbers in
the selected list will appear in the MMI display.
– Turn the rotary pushbutton to the telephone number you
wish to select.
– Press the rotary pushbutton. The selected telephone
number will be entered into the speller automatically.
– To start the call, turn the speller to OK and press the
rotary pushbutton, or
– Press the control button for Dial.
Calling up the Numbers dialled list (shortcut) and
calling a number
– Press the function selector button marked . The
speller will appear on the MMI display. There will be no
phone number in the entry space of the speller.
– Press the control button for Dial. The Numbers dialled list
will appear in the MMI display.
– Turn the rotary pushbutton to the telephone number you
wish to select.
– Press the rotary pushbutton. The selected telephone
number will be entered into the speller automatically.
RETURN
Fig. 85 Selecting a
telephone number
from a list
TEL
Page 94 of 193
Using the telephone 92
– To start the call, turn the speller to OK and press the
rotary pushbutton, or
– Press the control button for Dial.
Note
•In vehicles fitted with the Bluetooth car telephone kit any Missed
calls will be indicated by the symbol page 91, fig. 85 on the
MMI display.
•The telephone functions will depend on the mobile network
service provider and the mobile phone used. For more information,
contact your service provider.
Applies to vehicles: with Bluetooth car telephone kit or phone pre-installation
Answering and ignoring telephone
calls
Important: There must be an incoming call.
Answering telephone calls
– Turn the rotary pushbutton to Answer and press to
confirm, or– Press the control button for Answer.
Ignoring telephone calls
– Turn the rotary pushbutton to Ignore and press to
confirm, or
– Press the control button for Ignore.
Depending on whether the caller is stored in the phone book and
whether the number is transmitted with the call, the name, the tele-
phone number or Unknown will appear on the MMI display.
Note
•You can answer an incoming call while you are already talking on
the phone. The active telephone call will then be placed on hold
automatically.
•The audio source is muted automatically when you make or
receive telephone calls. The mute symbol page 42, fig. 31 will
then appear in the status line.
•If you do not want to hear any navigation cues while you are on
the phone, simply switch off the route guidance page 119.
•You can also answer and ignore incoming calls using the multi-
function steering wheel page 135.
•In vehicles fitted with phone pre-installation* a call can also be
answered by pressing the talk button on the mobile phone adapter
page 161, fig. 145.
Applies to vehicles: with Bluetooth car telephone kit or phone pre-installation
Ending calls
Important: You must be talking on the phone, or the phone
must be establishing a connection.
A2
Fig. 86 Answering an
incoming call