oil dipstick AUDI R8 SPYDER 2012 Owners Manual

Engine compartment lid emergency
release
The emergency release loop is located under
the right trim panel near the front passenger
seat.
F ig . 138 Front pas se n ge r footwe ll: emer gen cy re lease
l oo p
Engine compartment
Checkin g and fillin g 171
.. Make su re the rear spoiler is retracted
¢ page 144 .
.. Pull the loop forward to release the engine
compartment lid . The engine compartment
lid opens sligh tly.
.. Open the engine compartment lid¢.&.
in
Releasing the engine compartment lid on
page 170.
(D Note
To prevent damage to the vehicle, only
open the eng ine compartment lid when
the convertible top storage bay lid is
closed .
Th es e ar e th e most important it ems that you can ch eck.
Fig. 139 Ty pical layout for containers , en gin e oil dipst ick and eng ine o il filler cap
(D Power steering fluid reservoir
(@) ... .. .... .... ... ...... .
@ Eng ine oi l filler cap ('l=r.) .. ...
® Engin e oi l dipstick
146
174
174
A WARNING
Before you check anything in the engine
compartment, always read and heed all
WARNINGS ¢.&. in Working in the engine
compartment on page 169 .
-
{!) Tips
The coolant expansion tank is located un­
der the convertible top storage bay lid
¢ page 177.

172 Checking and filling
Engine oil
Engine oil specifications
The engine oil used in your Audi needs the
right kind of oil.
The engine in your Audi is a sophisticated
powerplant that was built to exacting specifi­
cations. This engine needs the right kind of
engine oil that meets specifications regarding
quality and viscosity so that it can run
smoothly and reliably. Choosing the right oil
and changing oil within the time and mileage intervals printed in your vehicle's Warranty
&
Maintenance booklet matters a lot more to­
day than it did years ago. Audi has developed
a special quality standard for engine oil that
will help assure that your vehicle's engine will
get the lubrication it needs for proper opera­
tion .
Modern engine lubrication has taken a quan­
tum leap in the last few years. Many synthetic
oils available today provide better engine lu­ brication that can outlast traditional petrole ­
um-based oils, making them a smart choice
for use throughout the life of your Audi .
Whether you use synthetic or petroleum­ based engine oil, the oil that you use must
conform to Audi's oil quality standard
VW 502 00 to help keep your vehicle's engine running smoothly and help prevent the for­
mation of harmful deposits, sometimes called
"sludge," that over time can lead to expensive
repairs.
At the time of printing, engine oils available in
the U.S. and Canada that meet the exacting
specifications of Audi oil standard VW 502 00
are synthetic engine oils. This does not mean,
however, that every synthetic engine oil will
meet Audi oil standard VW 502 00 . So always
be sure that you use an approved oil.
To help prevent the formation of harmful de­ posits use only oil with the following specifi­
cations printed on the oil container :
Audi oil standard VW 502 00
Oil container labels may carry the specifica­
tion singly or in combination with other desig­ nations and oil quality standards.
Viscosity
Engine oils are graded according to their vis­
cosity . The proper viscosity grade oil for your
engine depends on climactic or seasonal con­
ditions where you drive. You can use oil with a
viscosity grade of SAE SW40 across all tem­
perature ranges for normal driving conditions.
However, if engine oil viscosity grade SAE
SW40 is not available, you can also use viscos­
ity grade SAE SW-30 or SAE OW-40 as long as
it meets Audi oil quality standard VW 502 00
specifications.
Because engine oil that meets the Audi oil
standard may not be available everywhere
when you need it, we strongly recommend
that you always carry with you an extra quart (liter) of oil that expressly conforms to the
VW 502 00 specification, in case you have to
top off the oil while on the road.
Only if the level of the oil is at or below the
minimum mark on the oil dipstick - and no oil
that expressly conforms to Audi oil standard
VW 502 00 specifications is available -may
you top off with a high quality engine oil, pref­
erably synthetic-based, that meets ACEA A3
or API SM specifications, but even then, only
in viscosity grades SAE SW-40, SAE SW-30, or
SAE OW-40. However, during the entire time
between oil change intervals, never top off
with more than a total of 1 qt/liter engine oil
that does not conform to Audi oil specification
vw 502 00.
For more information about engine oil that
has been approved for your vehicle, please
contact either your authorized Audi dealer or
Audi Customer Relations at 1 (800) 822-2834 or visit our web site at www.audiusa.com or
www .audicanada .ca. Here you will also find a
current list of oils (manufacturers, brand
names etc.) that conform to Audi oil standard
vw 502 00.
Changing the engine oil

17 4 Che cking and filling
@ Tips
If you have the impression your eng ine
consumes excessive amounts of oil, we
recommend that you cons ult your a uthor­
ized Audi deale r to have the cause of yo ur
concer n properly d iagnosed . Keep in m ind
that the accurat e measurement of oil con ­
sumpt ion re quires great care an d may take
s ome time. Your author ized Audi dealer
h as ins truction s about h ow to mea sure o il
consumption a ccurately .
Checking the engine oil level
Fig. 140 Ins trume nt clus te r: En gin e o il te mpe rat ure
di sp lay
F ig.
14 1 Marke rs on oil dipstic k
Before you check anything in the eng ine com­
pa rtment,
alway s read and heed all WARN­
INGS ¢ A in Working in the engin e compart­
ment on page 169.
Determining oil lev el
.. Warm up the engine by dr iv ing unt il t he in­
strument cl uster d isplay shows an oil tem ­
perature of 210 °F (100 °C) to 230 °F
(110 °C)
¢ fig . 140 @ .
.. Park your vehicle so that it is hori zo ntally
level. ..
Allow the warm engine to r un for abo ut two
m inutes at idle.
.. Shut the eng ine off and wa it two minutes .
.. Check the oil level on the engine oil d ipstick
¢fig. 141.
Oil level within range (v
.. Do not add oil.
Oil level within range@
"" Add 1 quart (I liter) of oi l i=:> page 174. Af­
terwards ,
the oil leve l sho uld be with in
r a nge
G) .
Depend ing on the way the vehicle is dr iven
and the ope ra tin g cond itions, o il consu mption
ca n be up to 1 q uart per 600 miles (1 liter per
1,0 00 km) . Co nsump tion may be higher with­
i n the f irst 3,000 mi les (5,00 0 km) .
Adding engine oil~
Fig. 14 2 En g in e co mpa rt m ent: O il fil ler cap loca tio n
Befo re you check a nyth ing in the eng in e com­
partment,
always read and heed all WARN­
INGS ¢.&. in Working in the engine compar t­
men t on page 169.
.,. Unsc rew th e cap 't=;,1 to the eng ine o il filling
hole
¢ fig . 14 2.
.,. Care fully top o ff wi th t he a ppropr iate oil
¢ page 217.
.. Check the oil level again ¢ page 174 .
.. Top off the oi l aga in, if necessary .
.,. Sc rew the cap back on the filling hole and
slide the oil dipstick in as far as it w ill go. ..,.