navigation AUDI S3 2008 8P / 2.G Quick Reference Guide
[x] Cancel search | Manufacturer: AUDI, Model Year: 2008, Model line: S3, Model: AUDI S3 2008 8P / 2.GPages: 6, PDF Size: 0.31 MB
Page 3 of 6

Downloaded from www.Manualslib.com manuals search engine Page 3
© 2006 AUDI AG
AUDI AG reserves the right to alter any part of the vehicle, its equipment and technical specifications. No legal commitment can be implied by the information, illustrations or
descriptions in this publication. No part of this publication may be reprinted, reproduced or translated without the written permission of AUDI AG. All rights under the laws of copy-
right are expressly reserved by AUDI AG. Subject to alteration and amendment. Printed in Germany. Concept and layout: Pfriemer GmbH.
1Instruments
22
34
6108
97
22
51
Instruments
e
Rev counter
rWarning and indicator lamps
tCoolant temperature gauge
uFuel gauge
iSpeedometer
oMileage recorder
Trip recorder (top)/Total mileage (bottom)
pControl button:
p To reset the trip recorder
Press the control button until the display is reset to zero.
p To check distance to next service
Pull the control button briefly, when the vehicle is stationary and
the ignition is switched on.
aDisplay for driver information system:
pDriver messages
p Warning symbols and auto-check control
p Radio, CD and telephone
p Outside temperature p
On-board computer (with two memories)
p Navigation system
p Service interval display
p Lap timer
sControl button:
pTo check the auto-check control display
Press the button once with the ignition on.
p To call up driver messages
Press the button when a warning symbol lights up.
p To set speed warning 1
Press the button briefly when the desired speed is indicated
on the speedometer. To clear the speed limit, press the button
for at least 1 second.
p To set the digital clock/date
Keep pulling the button briefly until the desired display appears.
Turn the button to alter the time/date.
dDigital clock and date display/outside temperature display
Page 4 of 6

Downloaded from www.Manualslib.com manuals search engine Page 4
1
2
3
4
5631
32
788
14171613
12
18
19
212220
2423
25
26
27
30
29
15
10
28
11
99
,Further information for these items is given on the following pages.Audi S3 Kurzanleitung englisch 07.06271.562.808.20
1 .....Electric windows
Press or lift the switch as far as the first
stop and hold it until the window has
moved to the desired position.
“One-touch“ function: Press/pull the
switch briefly to the second stop.
2 .....Electric adjuster for exterior mirrors ,3 .....Door handle
4 .....Central locking switch
Vehicle: unlock
lock
5 .....Light switch ,6 .....Instrument lighting and daytime running lights
7 .....Lever for turn signals and main beam headlights
,8 .....Control buttons for multi-functionsteering wheel
,9 .....Horn
10 ...Instruments and warning/indicator lamps
11 ...Control lever for windscreenwipers/washer and on-board
computer
,12 ...Sound system or navigation system
13 ...Glove box
14 ...Switch for activating tyre pressure monitoring
15 ...Switch f
or Electronic Stabilisation
Program (ESP)
16 ...AIRBAG OFF display
17 ...Hazard warning lights
18 ...Storage tray or cup holder
19 ...Switches for air conditioner
,20 ...Thumbwheel for seat heating (front right seat)
21 ...Switch for heated rear window
22 ...Thumbwheel for seat heating (front left seat)
23 ...Gear lever
24 ...Ashtray 25 ...Cigarette lighter/socket
26 ...Storage compartment
27 ...Handbrake
28
...Remote control key in ignition lock
29 ...Lever for adjustable steering column
Pull lever down and adjust the
position of the steering column as
required. Then push the lever back up
as far as it will go.
30 ...Storage compartment
31 ...Control lever for cruise control system
,32 ...Bonnet release lever
Please read Owner’s Manual.
Instruments and
controls
Warning and indicator lamps
WARNING!1)If one of these symbols lights up while you are driving, stop the car
immediately, switch off the engine and refer to the Owner’s Manual.
2)If one of these symbols lights up while you are driving, please
contact a qualified workshop without delay.
1Warning and indicator lamps
5Instruments and controls · Filling the tank
Tyre pressure too low1)Engine oil pressure too low1)
Engine management
system2)Fuel level low
Electronic stabilisation
program (ESP)Check engine oil level
(warning lamp lights up
permanently)
Emission control systemEngine oil sensor defective2)
(warning lamp flashes)
Main beam headlightsBrake pads worn2)
Turn signals, hazard
warning lightskm/h 1Speed warning 1 and 2
Cruise control systemHeadlight range control
defective2)
Airbag system2)Washer fluid level low
AlternatorIncorrect battery voltage1)
Seat belt warning lampBulb monitor
Fault in brake system1)orhandbrake appliedBrake light failure
Anti-lock brake system2)Light sensor/rain sensor
defective
Electro-mechanical power
steering (loss of power)2)adaptive light defective
Electro-mechanical power
steering (failure)2)Tyre pressure warning lamp
Fault in cooling system1)
Please refer to the Owner’s Manual for information on further symbols.
Page 6 of 6
![AUDI S3 2008 8P / 2.G Quick Reference Guide Downloaded from www.Manualslib.com manuals search engine [11] Control lever for windscreen wipers/washer and on-board computer
Windscreen:Off
eBrief wipe
rTo activate intermittent wipe/rain sensor: Mo AUDI S3 2008 8P / 2.G Quick Reference Guide Downloaded from www.Manualslib.com manuals search engine [11] Control lever for windscreen wipers/washer and on-board computer
Windscreen:Off
eBrief wipe
rTo activate intermittent wipe/rain sensor: Mo](/img/6/865/w960_865-5.png)
Downloaded from www.Manualslib.com manuals search engine [11] Control lever for windscreen wipers/washer and on-board computer
Windscreen:Off
eBrief wipe
rTo activate intermittent wipe/rain sensor: Move control A to set
sensitivity level of rain sensor
(wiper delay intervals).
tSlow wiper speed
uFast wiper speed
iAutomatic wash and wipe: Pull lever towards you and hold.
Rear window:
oIntermittent wipe: Press lever towards dashboard.
pAutomatic wash and wipe: Press lever as far as it will go towards
dashboard and hold.
Controls for on-board computer
Press the top or bottom of rocker switch B repeatedly to display the various
computer functions in turn. Pr
ess and hold RESET button Cto return the current
display to zer
o.
RESET button
Press RESET button C repeatedly to select the on-board computer, navigation,
digital speedometer, lap timer
andmain menu displays in turn.
[19] Switches for air conditioner
Control on left:
Temperature selection for left side.
Control on right:
Temperature selection for right side.
Standard setting for all seasons:
Select a temperature between 16 °C and 28 °C
(60 °F - 84 °F) and press the switch.
Automatic mode
Changing the blower speed
(switches in the middle)
Economy mode
AUTO
ECON
AUTO
5
7
6
A
C
1
0
2
3
4
B
1
2
Filling the tank
Opening the tank flap
Open the tank flap by pressing it in the
direction indicated by the arrow.
Unscrew the tank cap and hook it onto
the flap.
Sticker for:
eFuel grade
rTyre pressures
Page 6