weight AUDI S4 1997 B5 / 1.G 01E Transmission Bearing House Assembly Workshop Manual

34-90


1 -
Drive flange
Pressing out Fig. 1Pressing in Fig. 2
2 -
Balance weight
Pressing off Fig. 3Pressing on Fig. 4
3 -
Seal
Pulling out Fig. 5Preparing for installation Fig. 6Driving in Fig. 7
4 -
Bearing housing
5 -
O-ring
Always replaceLightly oil before installing
6 -
Ball bearing for drive flange Pressing off Fig. 8Pressing in Fig. 9
7 -
Circlip
Pa
ge 3 of 9 Bearin
g housin
g, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.6

34-92


Fig. 2 Pressing in drive flange
- Before pressing in drive flange, press on balance weight Fig. 4
.
- Fit circlip.

Fig. 3 Pressing off balance weight
Pa
ge 5 of 9 Bearin
g housin
g, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.6

34-93


Note:
Note position of holes. Fig. 4 Pressing on balance weight

Fig. 5 Pulling out seal
Pa
ge 6 of 9 Bearin
g housin
g, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.6