differential AUDI S4 1997 B5 / 1.G 01E Transmission End Cover Service Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 1997, Model line: S4, Model: AUDI S4 1997 B5 / 1.GPages: 9, PDF Size: 0.2 MB
Page 2 of 9
34-104
1 -
End cover
If replaced:
- Re-determine thickness of circlip - 5 -.
- Re-determine shims for Torsen
differential Page 34
-85
.
2 -
Oil drain plug, 40 Nm
3 -
Cylinder roller bearing for input shaft
Pulling out Fig. 1Pressing in flush Fig. 2
4 -
Ball bearing for input shaft
Removing Fig. 3Installing Fig. 4If replaced, re-determine thickness of
circlip - 5 -
Pa
ge 2 of 9 End cover, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.8
Page 3 of 9
34-105
5 -
Circlip
Re-determine thickness Page 34
-108
Installing Fig. 4
6 -
Baffle plate
ReplaceRemoving Fig. 3Installing and peening in position when
replacing ball bearing for input shaft Fig. 5 Installing and peening in position when
replacing end cover Fig. 6
7 -
Needle bearing for Torsen differential
Pulling out Fig. 7 Driving in Fig. 8
Pa
ge 3 of 9 End cover, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.8
Page 9 of 9
34-111
Fig. 7 Pulling needle bearing for Torsen differential out from end
cover
A - Internal puller 46-58 mm, e.g. Kukko 21/7
B - Spindle from counter support Kukko 22/2
Fig. 8 Driving needle bearing for Torsen differential flush into
end cover
- Fit press plate VW 412 onto bearing with shoulder facing up.
Pa
ge 9 of 9 End cover, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.8