engine AUDI S4 1998 B5 / 1.G 01E Transmission Bearing House And Torsen Differential Workshop Manual

34-54


Bearing housing, Torsen
differential, end cover, internal
selector mechanism, input
shaft, drive pinion and hollow
shaft, removing and installing
(assembly sequence)

Special tools, testers and auxiliary items
required:

Engine and transmission support VW 540
Drip tray V.A.G 1306
Multi-purpose tool 771/1 with attachments
771/15, 771/37 and stud M8/ M10
Two-arm puller e.g. Kukko 20/10 with 200 mm
long hooks
Mandrel 2064
Clamping sleeve 3116
Thrust piece 3118
Pa
ge 1 of 38 Bearin
g housin
g, Torsen differential, end cover, internal selector mechanism, in
put shaft, drive
pinion and hollow shaft, removi...
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.5

34-56

Removing

- Secure transmission on engine and transmission support VW 540.
- Place drip tray V.A.G 1306 underneath and drain transmission oil (2 oil
drain plugs).
- Remove release bearing, clutch release lever and guide sleeve
Page 30
-27
.

- Remove bearing housing (arrow) and pull off.
A - M8/M10 stud
Pa
ge 4 of 38 Bearin
g housin
g, Torsen differential, end cover, internal selector mechanism, in
put shaft, drive
pinion and hollow shaft, removi...
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.5