AUDI S4 2000 B5 / 1.G 01E Transmission Final Drive Pinion And Ring Gear Adjustment Owner's Manual

AUDI S4 2000 B5 / 1.G 01E Transmission Final Drive Pinion And Ring Gear Adjustment Owner's Manual S4 2000 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1301/w960_1301-0.png AUDI S4 2000 B5 / 1.G 01E Transmission Final Drive Pinion And Ring Gear Adjustment Owner's Manual

Page 21 of 38

AUDI S4 2000 B5 / 1.G 01E Transmission Final Drive Pinion And Ring Gear Adjustment Owners Manual      
1) run at least 50 km (30 miles)  
Pa
ge 21 of 38 Drive 
pinion and rin
g gear, ad
justin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.

Page 22 of 38

AUDI S4 2000 B5 / 1.G 01E Transmission Final Drive Pinion And Ring Gear Adjustment Owners Manual 39-162
      
Performing check measurement  
     
Checking dimension "r" 
     
-  Turn drive pinion at least 5 turns in both 
directions. 
    
-  Insert universal mandrel and perform check measurem

Page 23 of 38

AUDI S4 2000 B5 / 1.G 01E Transmission Final Drive Pinion And Ring Gear Adjustment Owners Manual 39-163
      
Ring gear, adjusting
 
      (Adjusting differential)  
      Repairs after which the ring gear has to be 
adjusted  Page 39
-150
 , Adjustment overview  
     
Note:  
     
Differentia

Page 24 of 38

AUDI S4 2000 B5 / 1.G 01E Transmission Final Drive Pinion And Ring Gear Adjustment Owners Manual      
-  Remove differential tapered roller bearing outer 
races and take out shims   Page 39
-120
 . 
Pa
ge 24 of 38 Drive 
pinion and rin
g gear, ad
justin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/s

Page 25 of 38

AUDI S4 2000 B5 / 1.G 01E Transmission Final Drive Pinion And Ring Gear Adjustment Owners Manual 39-164
       Press outer race of left tapered roller bearing for 
differential (housing side) with shim "S2" into 
housing  
       Fig. 2 ,   Page 39
-126
 . To perform 
measurement use a shim "S2*"

Page 26 of 38

AUDI S4 2000 B5 / 1.G 01E Transmission Final Drive Pinion And Ring Gear Adjustment Owners Manual the stop). 
     
-  Insert differential into housing. Ring gear is 
positioned on right side (cover side). 
     
-  Fit cover and tighten bolts to 25 Nm. 
    
-  Install special tools VW 521/4 and

Page 27 of 38

AUDI S4 2000 B5 / 1.G 01E Transmission Final Drive Pinion And Ring Gear Adjustment Owners Manual 39-165
      
-  Turn differential 5 turns in both directions to 
settle tapered roller bearing. 
     
-  Place measuring plate VW 385/17 onto 
differential. 
    
- Fit measuring tools.
A - Dial gau

Page 28 of 38

AUDI S4 2000 B5 / 1.G 01E Transmission Final Drive Pinion And Ring Gear Adjustment Owners Manual 39-166
      
Formula:  
"S
total
"  
=  
"S2*" + measurement + bearing 
preload  
     
Example:  
  
   Inserted shim(s) "S2*"   1.00 
mm  
+   Measured value   0.50 
mm  
+   Bearing preload (const

Page 29 of 38

AUDI S4 2000 B5 / 1.G 01E Transmission Final Drive Pinion And Ring Gear Adjustment Owners Manual 39-167
      
Determining thickness of shim "S1*"  
     
Note:  
     
The preliminary adjustment shim "S1*" will be 
replaced with the final shim "S1" after 
determining the backlash. 
     The tota

Page 30 of 38

AUDI S4 2000 B5 / 1.G 01E Transmission Final Drive Pinion And Ring Gear Adjustment Owners Manual 39-168
      
Measuring friction torque (check)  
     
Drive pinion removed 
     Differential fitted with shims "S1*" and "S2*" 
    
Friction torque specifications:  1) run at least 50 km (30 miles
Page:   < prev 1-10 11-20 21-30 31-40 next >