tow AUDI S5 2009 8T / 1.G Quick Reference Guide

Downloaded from www.Manualslib.com manuals search engine
Page 3

1
24
856
733
3
1Instruments · Safety
© 2007 AUDI AG
AUDI AG reserves the right to alter any part of the vehicle, its equipment and technical
specifications. No legal commitment can be implied by the information, illustrations or
descriptions in this publication. No part of this publication may be reprinted, repro -
duced or translated without the written permission of AUDI AG. All rights under the laws
of copyright are expressly reserved by AUDI AG. Subject to alteration and amendment.
Printed in Germany. Concept and layout: Pfriemer GmbH.
Instruments
Adjust seat and sit in correct position
The front seats should not be posi - tioned too close to the steering
wheel or dashboard. Maintain a
distance of at least 25 cm and sit in a normal upright position. The top of the head restraint should be at
eye level or higher. Always keep your feet in the footwell.
Wear the seat belt correctly
Make sure that the shoulder section of the belt is positioned over the
centre of the shoulder and move the lap section as far down over the
hips as possible. The belts should always be worn so that they fit
tightly
(see illustration).
Safety of children in the vehicle
Children under 12 should travel on the rear seat. They must be
protected by a child restraint system which complies with the
European standard ECE-R 44 and is suitable for the child’s height and
weight. The safest place for the child restraint system is behind the
front passenger’s seat.
WARNING!
Please follow the instructions in the Owner’s
Manual. Please also read the instructions for your
child seat.
25 cm
Safety
Seat belts must be worn on every journey, even on short trips in town.
This applies to the front and rear passengers.
To ensure that the seat belts, belt tensioners and airbags are fully
effective, please note the following points:
eCoolant temperature gauge
rRev counter
tWarning and indicator lamps
uSpeedometer
iFuel gauge
oReset button for trip recorder
pDisplay for:
p Driver messages
p Date, time and mileage recorder displays
p Warning symbols and auto-check control p
Digital speedometer, radio, CD and telephone
p Navigation system, outside temperature
p Selector lever position, gear-change indicator
(recommends when to change gear)
p On-board computer (with two memories)
p Service interval display
abutton for:
pActivating digital clock and mileage recorder displays
temporarily
p Starting auto-check control manually
p Calling up driver messages again
p Setting speed warning 1

Downloaded from www.Manualslib.com manuals search engine
Page 5

1

3

2

4
5

6

7

[5] Light switch
eOff
rAUTO
Sensor-controlled activa-
tion/deactivation
tSide lights
uDipped beam/
main beam headlights
iInstrument lighting
oRear fog light
pFront fog lights

1

0

2

3

4

B

C

A

5

2

1

4

3

5

[8] Turn signal and main beam lever with buttonfor lane assist
eButton for lane assist
rRight turn signals (with ignition off: right parking light on)
tLeft turn signals (with ignition off: left parking light on)
uMain beam
headlights
iHeadlight flasher
[11] Control lever for windscreen wipers/washer and
on-board computer
Wipers off
eBrief wipe
rActivating intermittent wipe/rain sensor
Move control to set sensitivity level of rain sensor
(wiper delay intervals).

tSlow wiper speed
uFast wiper speed
iAutomatic wash and wipe
Pull lever towards you and hold.
Controls for on-board computer
Press the top or bottom of rocker switch repeatedly to
show the various computer displays in turn. Press and hold
RESET button to return the current display to zero.
Function selector for display modes
Press RESET button repeatedly to select the on-board
computer, digital speedometer and navigation system displays
in turn.

[2] Adjuster for exterior mirrors
Turn the adjuster to select:
eLeft exterior mirror
rOff
tRight exterior mirror
uRetract both exterior mirrors
Press the adjuster to move the mirror glass
in the desired direction.
Note: When adjuster knob is in position rthe mirrors are
heated automatically at low outside temperatures
(while ignition is switched on).

1
2
3

4

Downloaded from www.Manualslib.com manuals search engine
Page 6

[21] Audi hold assist
The Audi hold assist func-
tion automatically detects
when the vehicle is statio-
nary and prevents it from
rolling away. You do not
have to keep your foot on
the brake pedal.
Switching on/off: Press button
r. The diode in the button
will light up when the Audi hold
assist function is activated.
[21] Electromechanical parking brake
The parking brake replaces the conventional
handbrake.
Applying the parking brake when stopping:
Pull button
e.
Releasing the parking brake: Press brake
pedal and press button
e.
Releasing automatically: Drive off as normal.
The parking brake will be
released automatically
when you drive off.
WARNING!
Do not move the selector lever to positions P or R
when the vehicle is moving.

[18] Selector lever for automatic gearbox
P Parking lock
R Reverse gear
N Neutral
D Drive
To move the selector lever out of position
P or N, or into position Por R, press the inter-
lock button on the selector lever handle and the
brake pedal simultaneously.
Note:If the Audi hold
assist function is
switched off, use the
foot brake to hold the
vehicle when stationary
with the engine running
(in all selector lever
positions other than P).
Manual gear selection
(tiptronic)
The tiptronic program
enables you to change gear
manually. From position D,
push the selector lever to the right
as far as the stop. The currently selected gear is shown
in the instrument cluster display (bottom left). Push the
selector lever forwards briefly to shift up a gear, or pull
the lever back to shift down a gear.

1

2

3

[20] ENGINE START/STOP button
With the Audi advanced key you can start the engine
without having to insert the key into the ignition lock.
You only need to have the remote control key on your
person.
Starting the engine: Press the clutch pedal, select
neutral gear and press the START/STOP button
t.
On vehicles with automatic gearbox, move the selector
lever to position Por N, put your foot on the brake
pedal and press the START/STOP button.
Switching off the engine: Stop the vehicle, move the
selector lever to position Por Nand press the START/
STOP button
t.
Switching the ignition on/off: Press the START/STOP
button without pressing the clutch (manual gearbox)
or brake pedal (automatic gearbox).[22] Lever for steering column
adjustment
Pull the lever and adjust
the position of the steering
column as required. Then push
the lever towards the steering column until the
catch engages.