ECU AUDI TT 1995 8N / 1.G AEB ATW Engines Lubrication System Components Workshop Manual

17-13

- Remove engine covers.

- Set 10-222A engine support bridge on fender mounting edges.

WARNING!
Mounting hooks and pins on the engine sling must be secured with
the positioning lock (arrows). - Remove mounting eye from 2024A engine sling.
- Insert bolt -1- in center bore of 2024A engine sling and secure using
cotter pin.
- Attach 2024A engine sling bolt to 10-222A engine support bridge
spindle.
- Attach 2024A engine sling to mounting eyes at front and rear of engine.
Pa
ge 17 of 33 Lubrication s
ystem com
ponents, removin
g and installin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.17.1

17-14

- Using 10-222A engine support bridge spindle, lift
up engine as far as possible.

Note:
Lift engine only as far as possible without over-
stretching or damaging any pipes or coolant
hoses. Check for clearance of viscous fan; if
necessary remove.

- Release tension on ribbed belt Page 13
-
15
.

- Secure belt pulley for viscous fan using M5 x 60 mm bolt and unbolt
using 8mm hex socket wrench.
- Remove viscous fan and place forward in fan frame.

- Use VAG1202A engine hoist to support subframe.
Pa
ge 18 of 33 Lubrication s
ystem com
ponents, removin
g and installin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.17.1