oil pressure AUDI TT 1995 8N / 1.G AEB ATW Engines Lubrication System Components Workshop Manual

AUDI TT 1995 8N / 1.G AEB ATW Engines Lubrication System Components Workshop Manual TT 1995 8N / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/953/w960_953-0.png AUDI TT 1995 8N / 1.G AEB ATW Engines Lubrication System Components Workshop Manual

Page 5 of 33

AUDI TT 1995 8N / 1.G AEB ATW Engines Lubrication System Components Workshop Manual 17-3
 
  
8 - 
Bolt 
25 Nm (18 ft lb)
9 - 
Nut 25 Nm (18 ft lb)
10 - 
Brace 
11 - 
Nut 25 Nm (18 ft lb)
12 - 
Side brace 
13 - 
Bolt 20 Nm (15 ft lb)
14 - 
Oil pump housing 
15 - 
Gears Backlash, chec

Page 9 of 33

AUDI TT 1995 8N / 1.G AEB ATW Engines Lubrication System Components Workshop Manual 17-6
 
  
Part II
 
1 - 
Oil filter bracket 
2 - 
Gasket Always replace
3 - 
Oil retaining valve 8 Nm (71 in. lb)
4 - 
Gasket Always replace
5 - 
Coupling 30 Nm (22 ft lb)
6 - 
Oil feed line 25 Nm (18

Page 27 of 33

AUDI TT 1995 8N / 1.G AEB ATW Engines Lubrication System Components Workshop Manual 17-22
      
Oil pressure and oil pressure switch, 
checking
 
     
Function of dynamic oil pressure warning 
system  
     
Warning lamp, checking 
      With engine switched off and ignition on (te

Page 29 of 33

AUDI TT 1995 8N / 1.G AEB ATW Engines Lubrication System Components Workshop Manual 17-23
      
Special tools and equipment  
     
VAG1342 oil pressure tester
     VAG1527B voltage tester
     VAG1594A measuring appliance adapter
     
Test conditions 
     Oil level OK 
     Oil p

Page 30 of 33

AUDI TT 1995 8N / 1.G AEB ATW Engines Lubrication System Components Workshop Manual 17-24
      
Oil pressure switch, checking  
     
-  Disconnect line from oil pressure switch.
    
Note:  
While starting engine, watch pressure tester and LED as oil pressure 
switch may open durin

Page 31 of 33

AUDI TT 1995 8N / 1.G AEB ATW Engines Lubrication System Components Workshop Manual 17-25
      
Oil pressure, checking  
     
-  Disconnect line from oil pressure switch.
    
If specified values are not obtained, the pressure relief valve or the oil 
pump is faulty.  -  Remove oil