heater AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual

AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual TT 1996 8N / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/946/w960_946-0.png AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual

Page 2 of 34

AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual 19-2
 
  
Cooling system components
 
Coolant hose connection diagram  
1 - 
Heater core 
After replacing, replace coolant
2 - 
Lower coolant line Removing and installing   Page 19
-22
3 - 
Expansion

Page 8 of 34

AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual      
If the radiator, heater core, cylinder head or 
cylinder head gasket is replaced, completely 
replace the engine coolant. 
Pa
ge 8 of 34 Coolin
g system com
ponents, removin
g and installin
g
11

Page 10 of 34

AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual 19-9
      
Vehicles with large cap 
    
All models 
Note:  
To fill without using special tools, loosen coolant expansion tank and lift 
approx. 100 mm (approx. 4 in.).  -  Screw VAG1274/8 adapter o

Page 26 of 34

AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual 19-22
      
Coolant line (lower), removing and 
installing
 
     
Removing  
     
- Drain coolant   Page 19
-4 .
     
-  Remove intake air duct between intake manifold 
and charge air cooler.