warning AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual

AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual TT 1996 8N / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/946/w960_946-0.png AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual

Page 1 of 34

AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual 19-1
 
     
Cooling system components, 
removing and installing 
     
WARNING! 
     
The cooling system is pressurized when the 
engine is warm. When opening the expansion 
tank, wear gloves and ot

Page 4 of 34

AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual 19-4
      
Cooling system, draining and filling
 
     
Special tools and equipment  
     
VAG1306 drip tray
     VAG1274/10 with VAG1274/1 adapter or 
VAG1274/8 
     T40007 refractometer
     
Dra

Page 11 of 34

AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual 19-10
      
-  Start engine and maintain an engine speed of 
about 2000 RPM for approx. 3 minutes. 
     
-  Allow engine to idle until the lower radiator hose 
is hot.Check coolant level and top up

Page 19 of 34

AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual 19-17
      
Note:  
     When installing ribbed belt, check for correct 
seating on belt pulley. 
     
- Install V-belt   Page 13
-18
 .
     
-  Fill up with coolant   Page 19
-6 .
     
WARNING!

Page 24 of 34

AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual 19-20
      
Coolant thermostat, removing, installing 
and checking
 
     
Removing  
     
- Drain coolant   Page 19
-4 .
    
Installing  
WARNING! 
The cooling system is pressurized when the engin

Page 27 of 34

AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual 19-23
      
Installing  
      Installation is the reverse of removal, noting the 
following:  
     
-  Fill with coolant   Page 19
-6 .
     
WARNING! 
     
The cooling system is pressurized when

Page 28 of 34

AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual 19-24
      
Radiator, removing and installing
 
     
Special tools and equipment  
      VAG1306 drip tray  
     
Removing  
     
-  Remove front bumper. 
     
       Repair Manual, Body Exterior

Page 31 of 34

AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual 19-27
      
Installing  
      Installation is the reverse of removal, noting the 
following:  
     
-  Fill up with coolant   Page 19
-6 .
     
WARNING! 
     
The cooling system is pressurized wh

Page 32 of 34

AUDI TT 1996 8N / 1.G AEB ATW Engines Cooling System Components Workshop Manual 19-28
      
Cooling system, pressure test
 
     
Special tools and equipment  
     
VAG1274 cooling system tester
     VAG1274/1 adapter or VAG1274/8 with 
VAG1274/9 
     
Test condition:  
     E