bolt pattern AUDI TT COUPE 2009 Owners Manual

-What d o I do novv ? P'cV:IL--.....:...:..:....:....:.:...:..::......;..;____ ___________ _
Taking the vvheel off
Follow these instructions step-by-step for changing the
wheel.
Fig. 166 Wheel
c han ge: usi ng th e
screwdriver handl e
!w ith t he b lade
re move d) to tu rn th e
bolts
F ig . 16 7 W hee l
c h a ng e: a lig nm ent p in
in side th e top ho le
After you have lo ose ned all wheel bolts and raised the
vehicle off the gro und , pe rform the following steps to
remove and replace the wheel :
Removing th e vvh eel
- Use t he
he xagonal sock et in th e sc rewdriver handle to
completely turn out the topmost wheel bo lt and set it
aside on a
clean surface => fig. 166. -
Screw the t hreaded en d of the
alignm ent pin from the
tool kit hand -tight into t he now vacant bo lt hole
=> fig . 167.
- Then comple tely unscrew the other wheel bolts as
described above .
- Take off the whee l leaving the alignment pin in the bolt
hole .
Putting on the vvhe el
- Lift the spare wheel and carefully s lide it over the align­
ment p in to gu ide it in place.
- Use t he he xag onal socket in the sc rewdriver hand le t o
screw in and tig hten all whee l bolts
slightly.
Unscrew the alignment p in and insert and tighten t he
remai ning wheel bol t slightly like the rest.
- Tu rn the jack handle counter -c lockw ise to lower the
ve hicle until the jack is fully released.
- Use the whee l bolt w rench to tighten all wheel bolts
firmly =>
page 270. Tighten them crosswise , from one
bolt to the (approximately) opposite one, to keep the
wheel centered .
[ i ] Tip s
Never use the hexagonal socket in the handle of the screwdriver to
loosen or tighten the wheel bolts .
• Pull the reversible blade from the screwdriver before you use the
hexagonal socket in the handle to turn the wheel bolts.
• When mounting tires with
unid ire cti on al t re ad de sign make sure
the tread pattern is pointed the right way=>
page 273. ~