brake rotor BMW 1M 2011 E82 Owner's Manual
[x] Cancel search | Manufacturer: BMW, Model Year: 2011, Model line: 1M, Model: BMW 1M 2011 E82Pages: 48, PDF Size: 3.23 MB
Page 26 of 48
25
Things to remember when driving
Driving tips
Corrosion on brake rotors
When the vehicle is driv
en only occasionally,
during extended periods when the vehicle is not
used at all, and in operating conditions where
brake applications are le ss frequent, there is an
increased tendency for corrosion to form on
rotors, while contaminan ts accumulate on the
brake pads. This occurs because the minimum
pressure which must be exerted by the pads
during brake applications to clean the rotors is
not reached.
This can also lead to a permanent loss in ride
comfort and to squealing noises during braking.
A loss in comfort can also be caused by
extended braking with little pressure on the
pedal.
Should corrosion form on the brake rotors, the
brakes will tend to respond with a pulsating
effect that even extended application will fail to
cure.
For information on brake system technology,
refer to Compound brake on page 26.
Right-hand/left-hand traffic
When crossing the border into countries in
which one drives on the other side of the road
than in the country of registration, it is neces-
sary to take steps to avoid blinding oncoming
traffic with the headlamps.
Your BMW center stocks adhesive film. Follow
the accompanying instructions for applying the
film.
When the headlamps have been covered with
the adhesive film, rotate the light switch to
position 2, refer to the Owner's Manual for the
vehicle to switch on the low beams, even with
automatic headlamp control.
Online Edition for Part no. 01 40 2 609 935 - \251 08/11 BMW AG
Page 27 of 48
26
Driving tipsBMW 1-Series M Coupe technology
BMW 1-Series M Coupe technology
Vehicle equipment
In this chapter, all pr oduction, country, and
optional equipment that is offered in the model
range is described. As a result, some equip-
ment described may not be available in a
particular vehicle, for example due to the
options or national-market version selected.
This also applies to safe ty related functions and
systems.
High-performance engine
With a displacement of 182 cu in/3 liters, the
high-performance engine produces a maximum
output of 335 hp and a maximum torque of
332 lb ft/450 Nm, with Overboost 369 lb ft/
500 Nm.
The engine is equipped with a reduced-weight
dual-mass flywheel to achieve very spontane-
ous response characteristics.
Warming up the engine
During the warm-up phase, the high-perfor-
mance V8 engine runs a little more roughly due
to its emissions control system.
For technical reasons, the exhaust system
sounds slightly metallic when the engine is
cold.
Compound brake
Your BMW 1-Series M Coupe is equipped with
a high-performance brake system with perfo-
rated compound brake discs.
Due to special design features of the perforated
compound brake discs, operating noise is
audible during braking. However, this does not
affect the brake's performance, safe operation
or stability under load.
Braking correctly
To keep the brake system in optimal condition,
it is advisable to apply the brakes at regular
intervals as appropriate for the character of the
vehicle.
Refer also to Corrosion on brake rotors on
page 25.
Online Edition for Part no. 01 40 2 609 935 - \251 08/11 BMW AG
Page 45 of 48
44
ReferenceEverything from A to Z
Everything from A to Z
Index
A
ABS Antilock Brake
System 19
Accessories, refer to Vehicle equipment 5
Adhesive film, refer to Right- hand/left-hand traffic 25
Air pressure, refer to Tire
inflation pressure 31
AKI, refer to Fuel grade 30
Antilock Brake System
ABS 19
Approved axle loads, refer to Weights 42
Approved gross vehicle weight, refer to Weights 42
Assist systems, refer to
Driving stability control 19
Axle loads, refer to Weights 42
B
BMW Mobility System32
Brake pedal, refer to Braking safely 24
Brake rotors 26
Brakes, refer to Braking safely 24
Brake system, disc brakes 26
Breaking in the differential, refer to Engine and
differential 24
Break-in period 24
Buttons on the steering
wheel 9
C
Capacities 42 Center console, refer to
Around the center
console 12
Cockpit 8
Comfort area, refer to Around the center console 12
Controls and displays 8
Copyright 2
Curb weight, refer to
Weights 42
D
Dashboard, refer to Cockpit 8
Dashboard, refer to
Instrument cluster 10
Data, technical 40
– capacities 42
– dimensions 41
– engine 40
– weights 42
Dimensions 41
Displacement, refer to Engine
data 40
Displays, refer to Instrument cluster 10
Displays and controls 8
Drive-off assistance, refer to Dynamic Stability Control
DSC 19
Drive-off assistant 20
Driving notes 24
Driving off on hills, refer to Drive-off assistant 20
Driving stability control
systems 19
Driving tips, refer to Driving notes 24
DSC Dynamic Stability Control 19 Dynamic Stability Control
DSC 19
– indicator/warning lamp 20
– M Dynamic Mode MDM 19
E
Electronic Stability Program
ESP, refer to Dynamic
Stability Control DSC 19
Engine
– breaking in 24
– data 40
– speed 40
Engine output, refer to Engine
data 40
Engine speed, refer to Engine data 40
ESP Electronic Stability Program, refer to Dynamic
Stability Control DSC 19
F
Flat tire, repairing32
Fuel 30
– gauge 17
– high-quality brands 30
– quality 30
– specifications 30
– tank contents, refer to Capacities 42
Fuel clock, refer to Fuel gauge 17
Fuel display, refer to Fuel
gauge 17
Fuel filler flap 30
Online Edition for Part no. 01 40 2 609 935 - \251 08/11 BMW AG