brakes BMW 1M 2011 E82 Owner's Manual

19
Technology for driving comfort and safety
Controls
Technology for driving comfort and safety
Vehicle equipment
In this chapter, all production, country, and
optional equipment that is offered in the model
range is described. For this reason, descrip-
tions will be given of some equipment that may
not be available in a vehi
cle, for example due to
the special options or national-market version
selected. This also app lies to safety related
functions and systems.
Driving stability control
systems
Contrary to the descript ion in the Owner's Man-
ual for Vehicle, your BMW 1-Series M Coupe is
not equipped with Dyna mic Traction Control
DTC.
Dynamic Stability Control DSC
DSC optimizes driving stability and traction. In
addition, the system recognizes unstable driv-
ing situations such as understeering and over-
steering, and helps keep the vehicle on a safe
course within physical lim its by reducing engine
power and applying the brakes on individual
wheels.
The laws of physics cannot be repealed,
even with DSC. An appropriate driving
style always remains the responsibility of the
driver. Therefore, do no t reduce the additional
s a f e t y m a r g i n a g a i n b y t a k i n g r i s k s , a s t h i s c o u l d
result in an accident.<
M Dynamic Mode MDM
M Dynamic Mode is a mode of the Dynamic
Stability Control DSC that permits greater
longitudinal and latera l acceleration when
driving on dry surfaces, yet with reduced driving
stability. Only at the absolute limit of stability
does the system intervene to stabilize the vehicle by reducing engine power and applying
the brakes on the wheels. In such situations,
additional corrective steering maneuvers may
be necessary.
M Dynamic Mode is switched off every time the
engine is started.
When the M Dynamic Mode is on, stabi-
lizing measures are pe rformed to a limited
degree only. Take acti on yourself, otherwise
there is a risk of an accident. <
To maintain vehicle stability, drive with
the DSC activated and the
M Dynamic Mode deactivated whenever possi-
ble. <
Activating MDM
Push the button: the indicator lamps for MDM
and DSC OFF light up.
For better control
The indicator lamps MDM and
DSC OFF light up and the indicator
lamp DSC flashes:
M Dynamic Mode is controlling the
drive and braking forces.
The indicator lamp DSC lights up: DSC
and M Dynamic Mode have failed.
Online Edition for Part no. 01 40 2 609 935 - \251 08/11 BMW AG

24
Driving tipsThings to remember when driving
Things to remember when driving
Vehicle equipment
In this chapter, all pr oduction, country, and
optional equipment that is offered in the model
range is described. As a result, some equip-
ment described may not be available in a
particular vehicle, for example due to the
options or national-market version selected.
This also applies to safe ty related functions and
systems.
Break-in period
Note the following instructions for your
BMW 1-Series M Coupe that deviate from the
description in the Owner's Manual for Vehicle.
Engine and differential
Always obey all official speed limits.
Up to 1,200 miles/2,000 km
Drive at varying engine and road speeds, but do
not exceed an engine speed of 5,500 rpm and a
road speed of 105 mph/170 km/h.
Do not depress the ac celerator all the way.
From 1,200 miles/2,000 km to
3,000 miles/5,000 km
Engine and road speeds can be increased
gradually up to a traveling speed of 135 mph/
220 km/h. Use the maximum speed only for
brief intervals, e. g. when passing.
Transmission
The transmission begins functioning at an
optimal level only after a distance of approx.
300 miles/500 km. Do not exceed engine
speeds of 5,500 rpm during this period.
General driving notes
Clearance
Take into account the limited clearance of
your BMW 1-Series M Coupe, e. g. when
driving into underground parking garages or
over obstacles. Otherwise, the vehicle may be
damaged. <
Braking safely
Hills
To prevent overheating and the resulting
reduced efficiency of the brake system,
drive long or steep downhill gradients in the
gear in which the least br aking is required. Even
light but consistent brak e pressure can lead to
high temperatures, brake wear and possibly
even brake failure. <
You can increase the engine's braking effect by
shifting down, all the way to first gear if neces-
sary. This strategy helps you avoid placing
excessive loads on the brake system.
Never drive with the clutch held down,
with the transmission in neutral or with
the engine switched off; otherwise, engine
braking action will not be present or there will be
no power assistance to the brakes or steering.
Never allow floor mats, carpets or any other
objects to protrude into the area around the
pedals; otherwise, pedal function could be
impaired. <
Online Edition for Part no. 01 40 2 609 935 - \251 08/11 BMW AG

25
Things to remember when driving
Driving tips
Corrosion on brake rotors
When the vehicle is driv
en only occasionally,
during extended periods when the vehicle is not
used at all, and in operating conditions where
brake applications are le ss frequent, there is an
increased tendency for corrosion to form on
rotors, while contaminan ts accumulate on the
brake pads. This occurs because the minimum
pressure which must be exerted by the pads
during brake applications to clean the rotors is
not reached.
This can also lead to a permanent loss in ride
comfort and to squealing noises during braking.
A loss in comfort can also be caused by
extended braking with little pressure on the
pedal.
Should corrosion form on the brake rotors, the
brakes will tend to respond with a pulsating
effect that even extended application will fail to
cure.
For information on brake system technology,
refer to Compound brake on page 26.
Right-hand/left-hand traffic
When crossing the border into countries in
which one drives on the other side of the road
than in the country of registration, it is neces-
sary to take steps to avoid blinding oncoming
traffic with the headlamps.
Your BMW center stocks adhesive film. Follow
the accompanying instructions for applying the
film.
When the headlamps have been covered with
the adhesive film, rotate the light switch to
position 2, refer to the Owner's Manual for the
vehicle to switch on the low beams, even with
automatic headlamp control.
Online Edition for Part no. 01 40 2 609 935 - \251 08/11 BMW AG

26
Driving tipsBMW 1-Series M Coupe technology
BMW 1-Series M Coupe technology
Vehicle equipment
In this chapter, all pr oduction, country, and
optional equipment that is offered in the model
range is described. As a result, some equip-
ment described may not be available in a
particular vehicle, for example due to the
options or national-market version selected.
This also applies to safe ty related functions and
systems.
High-performance engine
With a displacement of 182 cu in/3 liters, the
high-performance engine produces a maximum
output of 335 hp and a maximum torque of
332 lb ft/450 Nm, with Overboost 369 lb ft/
500 Nm.
The engine is equipped with a reduced-weight
dual-mass flywheel to achieve very spontane-
ous response characteristics.
Warming up the engine
During the warm-up phase, the high-perfor-
mance V8 engine runs a little more roughly due
to its emissions control system.
For technical reasons, the exhaust system
sounds slightly metallic when the engine is
cold.
Compound brake
Your BMW 1-Series M Coupe is equipped with
a high-performance brake system with perfo-
rated compound brake discs.
Due to special design features of the perforated
compound brake discs, operating noise is
audible during braking. However, this does not
affect the brake's performance, safe operation
or stability under load.
Braking correctly
To keep the brake system in optimal condition,
it is advisable to apply the brakes at regular
intervals as appropriate for the character of the
vehicle.
Refer also to Corrosion on brake rotors on
page 25.
Online Edition for Part no. 01 40 2 609 935 - \251 08/11 BMW AG

44
ReferenceEverything from A to Z
Everything from A to Z
Index
A
ABS Antilock Brake
System 19
Accessories, refer to Vehicle equipment 5
Adhesive film, refer to Right- hand/left-hand traffic 25
Air pressure, refer to Tire
inflation pressure 31
AKI, refer to Fuel grade 30
Antilock Brake System
ABS 19
Approved axle loads, refer to Weights 42
Approved gross vehicle weight, refer to Weights 42
Assist systems, refer to
Driving stability control 19
Axle loads, refer to Weights 42
B
BMW Mobility System32
Brake pedal, refer to Braking safely 24
Brake rotors 26
Brakes, refer to Braking safely 24
Brake system, disc brakes 26
Breaking in the differential, refer to Engine and
differential 24
Break-in period 24
Buttons on the steering
wheel 9
C
Capacities 42 Center console, refer to
Around the center
console 12
Cockpit 8
Comfort area, refer to Around the center console 12
Controls and displays 8
Copyright 2
Curb weight, refer to
Weights 42
D
Dashboard, refer to Cockpit 8
Dashboard, refer to
Instrument cluster 10
Data, technical 40
– capacities 42
– dimensions 41
– engine 40
– weights 42
Dimensions 41
Displacement, refer to Engine
data 40
Displays, refer to Instrument cluster 10
Displays and controls 8
Drive-off assistance, refer to Dynamic Stability Control
DSC 19
Drive-off assistant 20
Driving notes 24
Driving off on hills, refer to Drive-off assistant 20
Driving stability control
systems 19
Driving tips, refer to Driving notes 24
DSC Dynamic Stability Control 19 Dynamic Stability Control
DSC 19
– indicator/warning lamp 20
– M Dynamic Mode MDM 19
E
Electronic Stability Program
ESP, refer to Dynamic
Stability Control DSC 19
Engine
– breaking in 24
– data 40
– speed 40
Engine output, refer to Engine
data 40
Engine speed, refer to Engine data 40
ESP Electronic Stability Program, refer to Dynamic
Stability Control DSC 19
F
Flat tire, repairing32
Fuel 30
– gauge 17
– high-quality brands 30
– quality 30
– specifications 30
– tank contents, refer to Capacities 42
Fuel clock, refer to Fuel gauge 17
Fuel display, refer to Fuel
gauge 17
Fuel filler flap 30
Online Edition for Part no. 01 40 2 609 935 - \251 08/11 BMW AG