wiring BMW 3 SERIES 2002 E46 Bluetooth Hadsfree Kit Upgrade Installation Instruction Manual

EN/9
Retrofit kit No. 84 64 0 152 501
Installation Instructions No. 01 29 0 152 511 Issue date: 07.2002
4. To install and connect the universal charger/hands-free electronic control unit (cars with SA 660/661/
662 only)
0
0
Connect the white FAKRA plug (1) of the WDCT aerial to
the tied back, black 54-pin plug
X4038
on the universal
charger/hands-free electronic control unit
F
.
Make sure that the standard aerial cable (2) is
plugged onto the standard wiring harness.

F
1
2
X4038
046 0965 Z

EN/10
Retrofit kit No. 84 64 0 152 501
Installation Instructions No. 01 29 0 152 511 Issue date: 07.2002
5. To install and connect the universal charger/hands-free electronic control unit
(cars with SA 602/606/609 only)
0
0
00
Use the hexagonal nuts
J
to screw the universal charger/
hands-free electronic control unit
F
onto the holder
H
.
0
Connect the white FAKRA plug (1) of the WDCT aerial to
the tied back, black 54-pin plug
X4038
on the universal
charger/hands-free electronic control unit
F
.
0
Use the hexagonal screws
K
to screw the holder
H
onto
the module holder.
Make sure that the standard aerial cable (1) is
plugged onto the standard wiring harness.

J
F
H
046 0973 Z
1
F
X4038
046 0978 Z
K
H
1
046 0975 Z

EN/12
Retrofit kit No. 84 64 0 152 501
Installation Instructions No. 01 29 0 152 511 Issue date: 07.2002
6. To install and connect the eject box
0
0
Connect the black 18-pin plug (1) of the eject box to the
plug
X4545
on the standard wiring harness.
Connect the FAKRA plug of the eject box (2) to the black
FAKRA plug on the standard aerial cable (3).
X4545
23
1
046 0970 Z

EN/13
Retrofit kit No. 84 64 0 152 501
Installation Instructions No. 01 29 0 152 511 Issue date: 07.2002
7. To install the hands-free microphone
0
00
Cars with SA 401 only
Release the tied back plug
X4221
from the standard
wiring harness and connect it to the hands-free
microphone
E
.
The arrow on the hands-free microphone
E
must
point to the front of the car.

Clip the hands-free microphone
E
into the trim (1).
0
Cars without SA 401 only
Release the tied back plug
X4221
from the standard
wiring harness and connect it to the hands-free
microphone
E
.
The arrow on the hands-free microphone
E
must
point to the front of the car.

Clip the hands-free microphone
E
into the trim (1).
E
1
X4221
046 0971 Z
E
1
X4221
046 0972 Z