change wheel BMW 3 SERIES 2004 E46 Service and warranty information

BMW Maintenance Programs -
2004 Models
Maintenance Programs are a benefit designed
to help reduce the cost of scheduled and
unscheduled maintenance.
2004 3 Series vehicles purchased from any
Authorized BMW center in the United States or
Puerto Rico are covered by Full Maintenance
for 48 months or 50,000 miles, whichever
occurs first. Coverage begins on the date of
first retail sale or the date the vehicle is first
placed in service as a demonstrator or
company vehicle, whichever is earlier.
Any authorized BMW center in the United
States or Puerto Rico will perform the sched-
uled or additional maintenance services on
your vehicle at no expense to you. The
maintenance schedule intervals are based on
normal driving conditions and operation.
Should you request more frequent mainte-
nance service, the cost of these services
will not be covered by the Maintenance
Program.
Coverage
Full Maintenance covers all factory recom-
mended maintenance, as determined by the
service interval indicator. Additional items that
need replacement due to normal wear and
tear, and that are not covered by the original
New Vehicle Limited Warranty - such as brake
pads, brake rotors, and wiper blade inserts -
are included, provided wear and tear
exceeds BMW specifications. Any adjust-
ments required due to normal operating
conditions are also included. See pages 5-8
of this statement for additional information.
Maintenance Intervals
Time intervals should be followed using the
maintenance interval as indicated by the BMW
Service Indicator lights on the check control
panel in the dashboard.This BMW Service and Warranty Information
Statement should be presented to your BMW
center when maintenance is required. Your
BMW center will stamp this book documenting
the services or maintenance performed.
Exclusions from coverage
– Items reimbursable under your New Vehicle
Limited Warranty.
– Gasoline and gasoline additive.
– Windshield washer additive (except when
in conjunction with scheduled
maintenance).
– Tires, wheel alignment, tire balance and
rotation.
– Wear and tear of soft trim items, such as:
seats, carpets, moldings, headliner, door
panels and all chrome trim.
– Damage detected when performing the rust
perforation inspection.
– Damage which results from negligence,
improper operation of the vehicle, wear and
tear or deterioration due to driving habits or
conditions, improper repair, environmental
influences, flood, accident or fire damage,
road salt corrosion, alteration, installation of
non-BMW accessories, or use of improper,
poor quality or contaminated fuel.
– Altered or unreadable Vehicle Identification
Number (VIN) or odometer irregularities or
vehicles where the true mileage cannot be
determined.
– Maintenance or repair after the vehicle is
deemed a total loss.
– Maintenance or repairs performed by other
than an Authorized BMW center within the
United States or Puerto Rico.
– Vehicles used in competitive events.
– Oil changes performed outside the
recommended maintenance intervals as
indicated by the Service Interval Indicator.
1

53 Con-
Series vertible
Change oil and oil filter while engine is at normal operating temperature.  
We recommend BMW 5W-30 High Performance Synthetic Oil,
p/n 07 51 0 017 866.
Reset service interval indicator.  
Replace microfilter.  
Check overall thickness of front and rear disc brake pads using special tool.  
If replacement is necessary: Examine brake disc surfaces. Clean brake pad
contact points in calipers. Grease wheel centering hubs. Check thickness
of parking brake linings only when replacing rear pads.
Check parking brake actuation. Adjust if necessary.  
Engine Oil Service
Engine Compartment
Lubricate convertible top sliding linkage covers. 
Body

63 Con-
Series vertible
Change oil and oil filter while engine is at normal operating temperature.  
We recommend BMW 5W-30 High Performance Synthetic Oil,
p/n 07 51 0 017 866.
Check transmission for leaks.  
Check rear axle for leaks.  
Half-shafts: Check for leaks at flexible boots.  
Visually check fuel tank, lines and connections for leaks.  
Check condition, position, and mounting of exhaust system.  
Examine for leaks.
Check power steering system for leaks. Check power steering fluid level;  
add fluid if necessary.
Check steering for absence of play, condition of suspension track rods,  
front axle joints, steering linkage and joint disc.
Check overall thickness of front and rear disc brake pads using special tool.  
If replacement is necessary: Examine brake disc surfaces. Clean brake pad
contact points in calipers. Grease wheel centering hubs. Check thickness
of parking brake linings only when replacing rear brake pads.
Check brake system connections and lines for leaks, damage  
and incorrect positioning.
Check parking brake actuation. Adjust if necessary.  
Check all tire pressures (including spare). Correct if necessary.  
Check condition of tires (outer surface [left/right]), tread wear and pattern;
in case of uneven tread wear, readjust wheel alignment if requested
(invoice separately).
Inspect entire body according to terms of rust performation limited warranty.  
(Must be performed at least every two years).
Engine Compartment
Read out diagnostic system.  
Check engine cooling system/heater hose connections for leaks.  
Check coolant level and antifreeze protection level. Add coolant if required.
Check windshield washer fluid level and antifreeze protection.  
Fill up and/or correct if required.
Check air conditioner for operation.  
Replace microfilter. (Note: reduce replacement interval in dusty  
operating conditions.)
Reset service interval indicator.
Inspection I
Only those items of inspection work which apply to your vehicle will be performed. This list is
subject to amendment.
Undercarriage