battery replacement BMW 330i SEDAN 2003 E46 Owner's Manual
[x] Cancel search | Manufacturer: BMW, Model Year: 2003, Model line: 330i SEDAN, Model: BMW 330i SEDAN 2003 E46Pages: 166, PDF Size: 3.16 MB
Page 10 of 166

 
Contents
 
Operation, maintenance
 
Special operating instructions:
 
Break-in procedures114
Driving notes115
Antilock Brake System 
(ABS)115
Brake system116
 
Wheels and tires:
 
Tire inflation pressure117
Tire condition117
Tire replacement118
Wheel and tire 
combinations120
Winter tires120
 
In the engine compartment:
 
Hood122
Engine compartment 
essentials124
Washer fluids126
Engine oil126
Coolant128
Brake fluid129
 
Maintenance:
 
The BMW Maintenance 
System130
 
Laws and regulations:
 
California Proposition 65 
warning131
OBD interface socket131
 
Owner service procedures
 
Replacement procedures:
 
Onboard tool kit136
Windshield wiper blades136
Lamps and bulbs137
Changing a wheel141
Run Flat tires*145
Battery146
Fuses146
 
Giving and receiving 
assistance:
 
Jump-starting147
Towing the vehicle148
 
Technical data
 
Engine data152
Dimensions153
Weights154
Capacities155 
Page 31 of 166

31
Opening and closing – via the remote controlThe conceptThe remote control gives you an excep-
tionally convenient method for unlock-
ing and locking your vehicle. Further-
more, it provides two additional 
functions: 
>To switch on interior lamps, refer to 
page 32.
With this function you can also 
search for your vehicle when parked 
in an underground garage, for 
instance
>To open the luggage compartment 
lid, refer to page 32.
The luggage compartment lid will 
open slightly, regardless of whether it 
was previously locked or unlocked.
Whenever you unlock or lock the vehi-
cle, you simultaneously deactivate/acti-
vate the anti-theft system, disarm/arm 
the alarm system and switch the interior 
lamps on/off.
You can have a signal set to con-
firm that the vehicle's locks have 
engaged securely.<
Master keys with remote control
Persons or animals inside the 
vehicle may be able to lock the 
doors from the inside. For this reason, 
always take the vehicle keys with you 
so that the vehicle can be opened again 
from the outside at any time.<
If it is no longer possible to lock 
the vehicle via the remote control, 
the battery is discharged. Use this key 
while driving for an extended period in 
order to recharge the battery.
To prevent unauthorized use of the 
remote control, surrender only the door 
and ignition key or the spare key when 
leaving the vehicle for valet parking, for 
example.
In the event of a system malfunction, 
please contact your BMW center. You 
can also obtain replacement keys 
there.<
1Unlock, convenience opening mode, 
and disarm alarm system
2Lock and secure, arm alarm system, 
activate interior lamps, disarm tilt 
alarm sensor and interior motion sen-
sor
3Open the luggage compartment lid, 
panic mode – trigger alarmTo releasePress the button once to unlock the 
driver's door.
Press the button a second time to dis-
engage all vehicle locks.
OverviewControlsMaintenanceRepairsDataIndex 
Page 137 of 166

137
Lamps and bulbsThe lamps and bulbs make essential 
contributions to the safety of your vehi-
cle. Therefore, comply fully with the fol-
lowing instructions during bulb replace-
ment. If you are not familiar with any of 
the procedures, consult your BMW 
center.
Do not touch the glass portion of 
a new bulb with your bare hands 
since even small amounts of impurities 
burn in to the surface and reduce the 
service life of the bulb. Use a clean 
cloth, paper napkin, or a similar mate-
rial, or hold the bulb by its metallic 
base.<
A replacement bulb set is available from 
your BMW center.
Before working on the electrical 
system, switch off the electrical 
accessory you are working on or dis-
connect the cable from the negative 
terminal of the battery. Failure to 
observe this precaution could result in 
short circuits.
To prevent injuries and damage, com-
ply with any instructions provided by 
the bulb manufacturer.<
Low beams and high beamsEngine compartment, left side:
1Low beams
2High beams
H7 bulb, 55 watts
The H7 bulb is pressurized. There-
fore, wear safety glasses and pro-
tective gloves. Failure to comply with 
this precaution could lead to injury if the 
bulb is damaged.<
1. Turn the two release catches at the 
front to the left – see arrow – to 
remove the bulb holder
2. Remove and replace the bulb.
When cleaning the headlamps, 
please follow the instructions in 
the Caring for your vehicle brochure.<
Xenon lamps*The service life of these bulbs is very 
long and the probability of a failure is 
very low, provided that they are not 
switched on and off an unusual number 
of times. If one of these bulbs should 
nevertheless fail, it is possible to con-
tinue driving with great caution using 
the fog lamps, provided local traffic 
laws do not prohibit this.
Because of the extremely high 
voltages involved, any work on the 
xenon lighting system, including bulb-
changing, should be carried out by 
technically-qualified personnel only. 
Otherwise, there is a risk of fatal 
injury.<
OverviewControlsMaintenanceRepairsDataIndex