light BMW 550I SEDAN 2008 E60 Owner's Manual
[x] Cancel search | Manufacturer: BMW, Model Year: 2008, Model line: 550I SEDAN, Model: BMW 550I SEDAN 2008 E60Pages: 288, PDF Size: 7.03 MB
Page 13 of 288

At a glance
 11Reference
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
7Buttons on steering wheel
8Instrument cluster12
11Ignition lock6112Horn, entire surface
15Releasing hood230 Mobile phone
*194:
>Press: accepting and ending 
call, starting dialing
* for 
selected phone number and 
redialing if no phone number is 
selected
>Press and hold: redialing
Volume
Activating/deactivating voice 
command system
* 23
Changing radio station172
Selecting music track183
Scrolling in phone book and in 
lists with stored phone numbers
Individually programmable
*54 
Individually programmable
*54 
Leaving lane warning
*106
9
Windshield wipers68
Rain sensor68
Sports Wagon: rear window 
wiper69
10Starting/stopping engine and 
Switching ignition on/off 61
13
Steering wheel heater*54
Steering wheel adjustment54
14
Cruise control
*69
Active cruise control70
16Opening luggage compartment lid/
tailgate33, 35
17
Head-Up Display
*102
BMW Night Vision
*104
18Parking lamp108
Daytime running lamps
*109
Low beams108
Welcome lamps108
Automatic headlamp control
*108 
Daytime running lamps
*109
Welcome lamps108 
Adaptive Head Light
*110 
High-beam assistant
*110
19
Instrument lighting112
Fog lamps
*112 
Page 15 of 288

At a glance
 13Reference
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
Indicator and warning lamps
The concept
The indicator and warning lamps can light up in 
different combinations and colors.
Some lamps are tested for proper function by 
briefly lighting up during starting of the engine 
or when the ignition is switched on.
Explanatory text messages
Text messages at the bottom edge of the 
Control Display explain the meaning of the 
displayed indicator and warning lamps.
Additional information, e.g. on the cause of a 
malfunction and on the corresponding need to 
take action can be displayed via the Check Con-
trol, refer to page83.In urgent cases, this information will be shown 
as soon as the corresponding lamp comes on.
Indicator lamps without text messages
The following indicator lamps signal particular 
functions:
High beams/headlamp flasher110
Fog lamps
*112
Handbrake applied63
Handbrake applied for Canadian 
models
Lamp flashes: 
DSC or DTC controls the drive and 
braking forces for maintaining vehicle 
stability92
DTC Dynamic Traction Control93
Engine malfunction with deteriorating 
emissions levels236 
Page 20 of 288

iDrive
18
Opening menu items of start menu
With the start menu you can open the menu 
items Communication, Navigation, Entertain-
ment and Climate by moving the controller to 
the left, right, front or rear.
You can open the   menu by pressing the con-
troller.
Comfort opening of menu items
Comfort opening offers you:
>Opening of a menu item of the start menu in 
the last display shown
>Direct changing between Communication, 
Navigation, Entertainment and Climate 
without pressing the   button
To do so, move the controller in the corre-
sponding direction and hold it for approx. 2 sec-
onds.
Displays in menu
1Each menu is divided into fields. 
The respective active field is highlighted.
2A symbol indicates the last selected menu 
item of the start menu:
1Menu items are usually grouped in horizon-
tal or vertical lists.
2In these lists, arrows indicate the possibility 
of accessing other menu items that are not 
currently visible.
3Settings are displayed graphically or 
numerically.
Communication
Navigation or onboard information
Entertainment
Climate
 menu 
Page 21 of 288

At a glance
 19Reference
Controls
Driving tips
Communications
Navigation
Entertainment
Mobility
Operating principle at a glance
Basic operation via iDrive is described in this 
view.You can view the individual steps under 
Settings on Control Display, Setting time, 
refer to page86.
1Selecting menu item:
>Turn the controller; the highlight moves
>Menu items shown in white can be 
selected by highlighting
2Activating menu item:
>Press the controller
>New menu items are displayed or the 
function is carried out
3Selecting menu item: refer to 14Changing between fields:
>Briefly move the controller left, right, 
forward or back
>Release controller
>Active field appears lighter
5Adjusting settings:
>Turn controller
>Graphic display, numerical value or text 
displays can be changed
>Confirmation by changing field 
Page 31 of 288

Controls
 29Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Personal Profile
The concept
You can set a number of functions of your BMW 
individually according to your preferences. 
Personal Profile ensures that most of these set-
tings are stored for the remote control currently 
in use without you having to do anything. When 
the vehicle is unlocked, the corresponding 
remote control is detected and the settings 
stored for it are called up and carried out.
This means that you will always find your BMW 
set to your own personal settings even if 
another person with his/her own remote control 
and settings has used the vehicle since the last 
time you drove it. The individual settings are 
stored for a maximum of four remote controls.
Personal Profile settings
Details on the settings are provided on the 
specified pages.
>Behavior of the central locking system 
when unlocking vehicle, refer to page30
>Automatic locking of the vehicle, refer to 
page32
>Programming buttons
* on steering wheel, 
refer to page54
>Displays on Control Display:
>Brightness of the Control Display, refer 
to page88
>Measuring units for consumption, route/
distances, temperature, and pressure, 
refer to page88
>12h/24h clock format, refer to page87
>Date format, refer to page87
>Language on Control Display, refer to 
page88
>Lighting settings:
>Triple turn signal activation, refer to 
page67
>Welcome lamps, refer to page108
>Pathway lighting, refer to page109
>Daytime running lamps
*, refer to 
page109>High-beam assistant
*, refer to page110
>PDC Park Distance Control
*: optical warn-
ing, refer to page90
>Head-Up Display
*: selection and bright-
ness of display, refer to page102
>BMW Night Vision
*: display settings, refer 
to page105
>Automatic climate control: AUTO program 
and intensity, cooling function, and auto-
matic recirculated air control/recirculated 
air mode, temperature, air distribution, tem-
perature in the upper body region, refer to 
text starting on page115
>Navigation system
*: voice instructions for 
destination guidance, refer to page142
In addition, the following, most recently 
selected settings are recalled during unlocking:
>Programmable memory/direct selection 
buttons: selecting stored functions, refer to 
page21
>Positions of driver's seat, outside mirrors, 
and steering wheel
*, refer to page47
>Audio sources: volume and tone settings, 
refer to page169
>Radio:
>Display of stored stations, refer to 
page172
>Switching RDS Radio Data System on/
off
*, refer to page175
>Phone: volume setting, refer to 
pages200,206
Central locking system
The concept
The central locking system is ready for opera-
tion whenever the driver's door is closed.
The system simultaneously engages and 
releases the locks on the following:
>Doors
>Luggage compartment lid or tailgate and 
rear window
>Fuel filler door 
Page 33 of 288

Controls
 31Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Do not lock the vehicle from the outside if 
persons are inside, as unlocking from the 
inside is not possible without special knowl-
edge.<
Switching on interior lamps
With vehicle locked:
Press the   button.
You can also use this function to locate your 
vehicle in parking garages etc.
Panic mode*
You can trigger the alarm system in case of dan-
ger:
Press the   button for at least 3 seconds.
Switching off alarm: press any button.
Sedan: opening luggage 
compartment lid
Press the  button for approx. 1 second.
The luggage compartment lid opens, regard-
less of whether it was previously locked or 
unlocked.
During opening, the luggage compart-
ment lid pivots back and up. Make sure 
that adequate clearance is available before 
opening. 
To prevent accidentally locking yourself out, 
never lay the remote control in the cargo bay. A 
previously locked luggage compartment lid is 
also locked again after closing.<
Sports Wagon: unlocking tailgate
Press the  button for approx. 1 second.
The tailgate will open slightly, regardless of 
whether it was previously locked or unlocked.
During opening, the tailgate pivots back 
and up. Make sure that adequate clear-
ance is available before opening. 
To prevent accidentally locking yourself out, 
never lay the remote control in the cargo bay. A 
previously locked tailgate is also locked again 
after closing. 
When opening the tailgate, the roll-up cover is 
raised.
sure to provide protection around all edges. 
Failure to do so could result in damage to the 
heating conductors of the rear window.<
Confirmation signals
You can activate or deactivate the confirmation 
signals.
1.Open the start menu.
2.Press the controller to open the   menu.
3.Select "Settings" and press the controller.
4.Select "Vehicle / Tires" and press the con-
troller.
5.Change to upper field if necessary. Turn the 
controller until "Door locks" is selected and 
press the controller.
6.Select "Confirmation" and press the con-
troller.
7.Select the desired signal.
8.Press the controller. 
 The signal is activated.
Malfunction
The remote control may malfunction due to 
local radio waves. Should the remote control fail 
to operate due to interference of this kind, 
unlock and lock the vehicle via the door lock 
using a key.
If it is no longer possible to lock the vehicle 
using the remote control, then the battery is 
discharged. Use this remote control during an 
extended drive; this will recharge the battery, 
refer to page28. 
Page 40 of 288

Opening and closing
38
Tilt alarm sensor
The tilt of the vehicle is monitored. The alarm 
system reacts, e.g. in case of an attempted 
wheel theft or towing.
Interior motion sensor
In order for the interior motion sensor to func-
tion properly, the windows and glass sunroof
* 
must be completely closed.
Avoiding unintentional alarms
The tilt alarm sensor and interior motion sensor 
may be switched off at the same time. This pre-
vents unintentional alarms, e.g. in the following 
situations:
>In two-level garages
>When transporting on car-carrying trains, 
by sea or on a trailer
>When animals are to remain in the vehicle
Switching off tilt alarm sensor and 
interior motion sensor
Press the   button on the remote control 
again as soon as the vehicle is locked.
The indicator lamp lights up briefly and then 
flashes continuously. The tilt alarm sensor and 
the interior motion sensor are switched off until 
the next time the vehicle is unlocked and subse-
quently locked again.
Comfort access*
Comfort access allows you to access your vehi-
cle without having to hold the remote control in 
your hand. It is sufficient to carry the remote 
control with you, e.g. in your jacket pocket. The 
vehicle automatically detects the associated 
remote control in the immediate vicinity or in 
the interior.
Comfort access supports the following func-
tions:
>Unlocking/locking vehicle
>Comfort closing
>Opening luggage compartment lid/tailgate 
separately>Sports Wagon: opening rear window sepa-
rately
>Starting engine
Functional requirement
>The vehicle or the luggage compartment 
lid/tailgate can only be locked if the vehicle 
detects that the remote control you are car-
rying is outside the vehicle.
>The next unlocking and locking cycle is not 
possible until after approx. 2 seconds.
>The engine can only be started if the vehicle 
detects that the remote control is located in 
the vehicle.
Comparison with ordinary remote 
control
You can control the functions mentioned previ-
ously with the comfort access or by pressing 
the buttons on the remote control. Therefore, 
please familiarize yourself with the information 
on opening and closing beginning on page28 
beforehand.
The special features when using comfort 
access are described in the following.
Should a short delay occur when opening 
or closing the windows or the glass sun-
roof, the system is checking whether a remote 
control is located in the vehicle. Please repeat 
opening or closing if necessary.<
Unlocking
Grasp a door handle fully, refer to arrow1, but 
do not touch the surfaces, arrow2 or 3 when 
doing so. This corresponds to pressing the   
button. 
Page 41 of 288

Controls
 39Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Locking
>On the driver's door, touch the highlighted 
surface, arrow2, with a finger for approx. 
1 second, but do not grasp the door handle.
>On the remaining doors, touch the high-
lighted surface, arrow3, with the back of 
your hand for approx. 1 second, but do not 
grasp the door handle.
This corresponds to pressing the   but-
ton.
Please make sure that the ignition and all 
electronic systems/consumers are 
switched off before locking to save the bat-
tery.<
Comfort closing
Hold a finger or the back of your hand against 
the surface, arrow2 or 3, but do not grasp the 
door handle while doing so.
The windows and the glass sunroof
* are 
closed.
Watch during the closing process to be 
sure that no one is injured. Removing the 
hand from the door handle stops the closing 
process immediately.<
Opening luggage compartment lid/
tailgate separately
Press the button on the luggage compartment 
lid/tailgate. This corresponds to pressing the 
 button.
If a remote control accidentally left in the 
cargo bay is detected in the locked vehi-
cle after closing the luggage compartment lid/
tailgate or the rear window, the lid or rear win-
dow opens again. The hazard warning flashers 
flash and a signal
* sounds.<
Sports Wagon: opening rear window 
separately
Press the button on the rear window, refer to 
page34.
Switching on radio readiness
By pressing the Start/Stop button, you switch 
on the radio readiness, refer to page61.
When doing so, do not depress the brake 
or clutch pedal, otherwise the engine will 
start immediately.<
Starting engine
You can start the engine or switch on the igni-
tion if a remote control is located in the interior 
of the vehicle. It need not be inserted in the igni-
tion lock, refer to page61.
If you take the remote control with you when 
leaving the vehicle with the engine running, a 
warning lamp lights up. In addition, a message 
appears on the Control Display. As long as no 
remote control is detected, it is only possible to 
restart the engine within approx. 10 seconds 
after it is switched off.
Switching off engine with automatic 
and sport automatic transmission
The engine can only be switched off in trans-
mission position P, refer to page62.
To switch off the engine in transmission posi-
tion N, the remote control must be inserted in 
the ignition lock.
Before driving into a car wash with 
automatic and sport automatic 
transmission
1.Insert remote control into ignition lock.
2.Depress brake pedal.
3.Engage transmission position N.
4.Switch off the engine.
The vehicle can roll. 
Page 43 of 288

Controls
 41Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Pinch protection system
If the closing force exceeds a specific value as a 
window closes, the closing action is interrupted 
and the window reopens slightly.
Despite the pinch protection system, 
inspect the window's travel path prior to 
closing it, as the safety system might fail to 
detect certain kinds of obstructions, such as 
thin objects, and the window would continue 
closing. 
Do not install any accessories in the range of 
movement of the windows, otherwise the pinch 
protection system will be impaired.<
Closing without pinch protection 
system
In case of danger from outside or if, for example, 
ice on the window prevents normal closing, pro-
ceed as follows:
1.Pull the switch beyond the resistance point 
and hold. The pinch protection system is 
limited and the window opens slightly if the 
closing force exceeds a certain value.
2.Pull the switch beyond the resistance point 
and hold again within approx. 4 seconds. 
The window closes without the pinch pro-
tection system.
Safety switch
With the safety switch, you can prevent the rear 
windows from being opened or closed via the 
switches in the rear passenger area, by chil-
dren, for example. The LED lights up when this 
safety feature is activated.Always press the safety switch when chil-
dren ride in the rear, otherwise uncon-
trolled closing of the windows could lead to 
injuries.<
Glass sunroof*, electric
The glass sunroof is ready for operation with 
the ignition switched on, refer to page61.
To prevent injuries, exercise care when 
closing the glass sunroof and keep it in 
your field of vision until it is closed. 
Always take along the remote control when you 
leave the vehicle, otherwise children could, for 
example, operate the roof and injure them-
selves.<
Raising
Press the switch. 
The closed glass sunroof is raised and the slid-
ing visor opens slightly.
Do not use force to close the sliding visor 
with the glass sunroof in its raised posi-
tion, otherwise the mechanism will be dam-
aged.<
Opening, closing
>Slide the switch back to the resistance 
point. 
The glass sunroof and the sliding visor open 
together for as long as you hold the switch 
in this position.
>Briefly press the switch back beyond the 
resistance point. 
The glass sunroof and the sliding visor open 
automatically. Briefly pressing the switch 
stops the motion. 
Page 45 of 288

Controls
 43Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Sports Wagon: 
Panorama glass sunroof
The panorama glass sunroof is ready for opera-
tion with the ignition switched on, refer to 
page61.
To prevent injuries, exercise care when 
closing the panorama glass sunroof and 
keep it in your field of vision until it is closed. 
Always take along the remote control when you 
leave the vehicle, otherwise children could, for 
example, operate the roof and injure them-
selves.<
Raising
Press the switch. 
The closed sunroof is raised and the sliding 
visor opens slightly.
Do not use force to close the sliding visor 
with the glass sunroof in its raised posi-
tion, otherwise the mechanism will be dam-
aged.<
Opening, closing
Sliding visor
You can move the sliding visor independently 
with the sunroof closed or raised.
>Slide the switch back to the resistance 
point. 
The sliding visor opens as long as you keep 
the switch in this position.
>Briefly press the switch back beyond the 
resistance point. 
The sliding visor will open automatically. 
Briefly pressing the switch stops the 
motion.You can close the sliding visor in a similar man-
ner by sliding the switch forwards.
Panorama glass sunroof
With the sliding visor open, proceed as 
described under Sliding visor.
For information on using the convenient opera-
tion at the door lock or with the remote control, 
refer to page30 or32.
For information on comfort closing with comfort 
access, refer to page39.
Opening and closing sunroof and 
sliding visor together
Briefly press the switch beyond the resistance 
point twice consecutively.
Briefly pressing the switch stops the motion.
Comfort modes
>Press the switch twice with the sunroof 
open: 
The sunroof is raised.
>When the sunroof is raised, briefly press the 
switch twice in the opening direction: 
The sunroof is opened all the way.
Comfort position
The sunroof is not completely open in the com-
fort position. This reduces the wind noises in 
the interior.
Each time the panorama glass sunroof is com-
pletely opened or closed, it stops in the comfort 
position. If desired, continue the motion follow-
ing this with the switch.
Pinch protection system
If the panorama glass sunroof or sliding visor 
encounter resistance when closing from 
roughly one third of the sunroof opening or 
when closing from the raised position, the clos-
ing action is interrupted and the panorama 
glass sunroof and sliding visor reopen a little.
Despite the pinch protection system, 
inspect the sunroof's travel path prior to 
closing it, as the safety system might fail to 
detect certain kinds of obstructions, such as